Hansaloy (Hansaloy Corporation) Bread Slicing Systems & Parts
Industrial band and reciprocating blades, CNC lattice assemblies, blade guides, automatic CM drum-slicer hones, depanner belts and cups, and MonoFlex/MultiFlex chains from Hansaloy Corporation.
Band Blades H27, H22, TIGR, S, E, Alt Pitch
Hansaloy band blades feature H27, H22, TIGR, S, E, V-Tooth, and Alt Pitch edges in 1/2, 3/8, and 1/4 in pitches. Proprietary bakery steel alloys and high-strength welds fit global bread and bun band slicers. Consistent scallop grinding keeps slice geometry uniform with minimal crumb.
- Edges: H27, H22, TIGR, S, E, V-Tooth
- Pitches: 1/2", 3/8", 1/4" (6.4-12.7 mm)
- Material: proprietary bakery steel alloy
- Process: precision weld & scallop grinding
Reciprocating Slicer Blades
Hansaloy reciprocating blades fit Berkel, Daub, Hartman, Heristal, Herlitzius, JAC, National/Dowson, Oliver, VLB, Wabama, and custom slicers. Options include stainless steel and Teflon coating with 1/2 in or 1/4 in pitch. Mounting ends cover hole, pin, rivet, slot, and threaded fitting.
- Machines: Berkel, Daub, Hartman, JAC, Oliver
- Ends: hole, pin, rivet, slot, threaded
- Options: Teflon coating, stainless steel
- Pitches: 1/2" (12.7 mm), 1/4" (6.4 mm)
CNC Lattice Assemblies (AMF / Micro / Sabre)
Hansaloy adjustable lattice assemblies fit AMF and Bettendorf-Stanford Micro or Sabre bread slicers. CNC-machined high-strength steel frames with stainless slide bars remove play and prevent thick-and-thin slices. Slice width ranges span 3/8-5/8 in, 3/8-7/8 in, and 3/8-1 in.
- Ranges: 3/8"-5/8", 3/8"-7/8", 3/8"-1"
- Frame: high-strength steel, stainless bars
- Slicers: AMF / Bettendorf-Stanford Micro
- Maintenance: Lattice Alignment Kit
Blade Guides & Guide Holders
Hansaloy supplies four blade guide styles: Standard Offset with wear-resistant coating, Ceramic Offset for minimal heat and maximum guide life, 4-Prong Rod Style in hardened tool steel for build-up prone products, and Loop Back guides. Precision guide holders maintain exact finger alignment.
- Styles: Standard Offset, Ceramic Offset
- Other types: 4-Prong Rod Style, Loop Back
- Assembly: precision-fit guide holders
- Benefit: low heat, low crumb build-up
Automatic CM Blade Hone Units
Hansaloy Automatic CM Blade Hones and replacement parts serve 28 in and 46 in drum slicers. The cantilevered 3-bolt side mount keeps one side clear for blade changes, running on 115VAC (optional 220VAC) via PLC or timer with 3/4 in shafts, heavy-duty gearbox, and ceramic or aluminum oxide stones.
- Drum sizes: 28" and 46" drum slicers
- Power: 115VAC single phase (opt. 220VAC)
- Hardware: 3/4" shafts, motor & gearbox
- Stones: long-life ceramic & aluminum oxide
Depanner Cups, Twist-R-Lock Clips & Belts
Hansaloy depanner vacuum cups (DPC117A-DPC121C and Mini Cup DPC 119B) come in metal-detectable soft, ultra-soft, and high-temp versions. Metal-detectable Twist-R-Lock clips (Standard, Hard, Tall) lock cups onto custom variable-hole belts (69-112 in length, 2-44 in width, 12 in overlap seam).
- Cups: DPC117A-DPC121C, Mini DPC 119B
- Clips: Twist-R-Lock Standard, Hard, Tall
- Belts: 69-112" length, 2-44" width
- Design: 12" overlap seam, custom holes
MonoFlex & MultiFlex Conveyor Chains
Hansaloy replacement MonoFlex (cooler) and MultiFlex (conveyor) chains fit Stewart-style bakery conveyors in 19-26 in frame widths. Features include solid rollers with oil ports, seam-oriented bushings, surface-hardened pins, quad-staked attachment plates, and crimped stainless steel wires.
- MonoFlex widths: 22" and 26" frames
- MultiFlex widths: 19", 20", 22", 23", 26"
- Wear parts: solid rollers & oil ports
- Wires: stainless steel, straight & offset
Tension Gauges, Safety Pack & BladeAway
Hansaloy digital and mechanical tension gauges measure blade tension in LBS across slicer stations to extend blade life. Safety Pack dispenses blades in a sanitary loop, BladeAway cuts used blades into 7 in pieces, and cut-resistant gloves use Spectra, Kevlar, steel, or Dyneema.
- Gauges: digital LED & mechanical LBS
- Dispensing: Safety Pack loop dispenser
- Disposal: BladeAway 7" portable cutter
- Gloves: Spectra/Kevlar & Dyneema PU
Blade Edge Selection & Slicer Compatibility
Hansaloy band blades cover H27 and H22 parallel-honed scallops, TIGR multi-tip blades for dense loaves, S and E cross-ground edges, V-Tooth, and Alt Pitch in 1/2" (12.7 mm), 3/8" (9.5 mm), and 1/4" (6.4 mm) pitches.
Reciprocating blades fit Berkel, Daub, Hartman, Heristal, Herlitzius, JAC, National/Dowson, Oliver, VLB, and Wabama frames with Teflon coating and stainless steel options.
Lattices, Blade Guides & Drum-Slicer Honing
CNC-machined lattices for AMF and Bettendorf-Stanford Micro or Sabre slicers support 3/8"-5/8", 3/8"-7/8", and 3/8"-1" slice widths with stainless slide bars. Blade guides come in Standard Offset, Ceramic Offset, 4-Prong Rod Style, and Loop Back configurations.
Cantilevered Automatic CM Blade Hones fit 28" and 46" drum slicers with 115VAC or optional 220VAC power, 3/4" shafts, and ceramic or aluminum oxide stones.
Depanner Components, Conveyor Chains & Safety
Depanner hardware spans metal-detectable and high-temp cups (DPC117A-DPC121C, Mini Cup DPC 119B), Twist-R-Lock clips (Standard, Hard, Tall), and custom 69-112" x 2-44" belts with 12" overlap seams.
Replacement MonoFlex (22", 26") and MultiFlex (19"-26") chains fit Stewart-style conveyors, supported by LED LBS tension gauges, Safety Pack dispensers, and BladeAway 7" disposal cutters.
Hansaloy and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hansaloy and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Movacolor
- Equipment and parts for FPT Industrie
- Equipment and parts for Hamacher Maschinenbau
- Equipment and parts for Hans Sasserath / SYR
Documents and sources
- Hansaloy Corporation official website — product overview
- Hansaloy Blades — proprietary bakery steel alloys
- Hansaloy Bread & Bun — band blade edge styles
- Hansaloy Bread & Bun Blades brochure (PDF)
- Hansaloy Reciprocating Blades — compatible slicer brands
- Hansaloy Reciprocating Blades specification form (PDF)
- Hansaloy Lattice & Guides — assemblies and blade guide styles
- Hansaloy Lattice, Guides & Hone brochure (PDF)
- Hansaloy Hone — automatic blade hones for 28" and 46" slicers
- Hansaloy Depanner — vacuum cups, Twist-R-Lock clips and belts
- Hansaloy MonoFlex & MultiFlex Chain brochure (PDF)
- Hansaloy Complete Slicing Solution brochure (PDF)
- Hansaloy Safety — Safety Pack, BladeAway and cut-resistant gloves
