ZPU PROMASZ (PROMASZ) Stone Processing Machinery

Polish stone processing machines by ZPU PROMASZ / PROMASZ for granite, marble, and conglomerate: PW1TK and PP2TK18 bridge saws, PLBK wire saws, WGALS polishing lines, AS-14.0, B1PK, and WMKK.

PW1TK & XXL Single-Column Saws

Longitudinal bridge saws PW1TK-14.0-600 (Compact, Twist, PLC, 5/6-axis CNC) and XXL block saws cut granite and marble with ø500–2000 mm blades on tables up to 3500×3000 mm. Drives run 9–18.5 kW with inverters and ESA 15" controls. Spares cover spindles, ballscrews, inverters, and water sensors.

  • Working area to 3500×3000 mm
  • Blades ø500–2000 mm
  • Motors 9–18.5 kW
  • 5/6-axis CNC & ESA PLC

PP2TK18 Dual-Support Saws

The PP2TK18-14.0-600 crosscut saw formats granite and marble slabs across a 3000×3000 mm field using ø600 mm (opt. ø900 mm) blades and a 9 kW motor. Z-axis encoder accuracy is ±0.2 mm/100 mm with three axis inverters up to 8 m/min. Spares cover encoders, ballscrews, inverters, and PLC panels.

  • 3000×3000 mm working area
  • Z accuracy ±0.2 mm/100 mm
  • Blades ø600 / ø900 mm
  • 3 axis inverters X, Y, Z

PW4TK, PW5TK & WDK Multi-Blade Saws

Multi-support saws include PW4TK-14.0-600 (2–7 carriages, 3500×2000 mm table), 4-head angular WDK-14.0-04 (3–6 km/24h), and 55 kW block saw PW5TK1600 with up to 5 blades. They cut granite, sandstone, and conglomerates. We source spindle motors, belts, actuators, and PLC modules.

  • PW4TK: 2 to 7 carriages
  • PW5TK1600: 55 kW main drive
  • WDK-14.0-04: feed to 3 m/min
  • Tables 0–90° and tilt 60°

PLBK & PLP Diamond Wire Saws

Wire saws PLBK-14.0-1800, 5-wire PLBK-14.0-5000, and CAD profiler PLP-14.0-300-PLC slice blocks up to 3500×1800×1760 mm on 20 t trolleys. Equipped with 11 kW drives, dynamic tensioning, and ±0.1 mm/100 mm Z accuracy. Spares include guide pulleys, tension sensors, ballscrews, and inverters.

  • Blocks to 3500×1800×1760 mm
  • Trolley load capacity 20 t
  • 11 kW main wire drive
  • Z accuracy ±0.1 mm/100 mm

AS-14.0 Automatic Stone Polishers

The AS-14.0 series (01.1, servo 01.3, and monoblock 01.4A) grinds and polishes granite and marble slabs up to 30 cm thick across 3200×3200 mm tables. Models 01.3 and 01.4A add automatic tool magazines and Mitsubishi controls. Spares cover spindles, pneumatic cylinders, tool grippers, and servos.

  • Table up to 3200×3200 mm
  • Slab thickness up to 30 cm
  • Automatic tool magazine
  • Mitsubishi CNC & servos

WGALS Multi-Head Polishing Lines

The WGALS line polishes rectangular granite and marble slabs across a 1.8×3.0 m zone using four 11 kW spindles (420 rpm, 0.05–0.1 MPa pneumatic pressure) and Fatek PLC control; a 12-head line with flaming is also offered. Spares include conveyor belts, linear bearings, cylinders, and Fatek HMIs.

  • 1.8×3.0 m zone, 50 kVA
  • Four 11 kW heads, 420 rpm
  • Pneumatic pressure 0.05–0.1 MPa
  • Fatek PLC touch control

B1PK & B10KK Edge Polishers

Profile polisher B1PK-14.0-2000.2S and 10/12-head angular B10KK-14.0-2000 finish marble, granite, and conglomerate edges up to 3 m long and 20–100 mm thick. Features include servos, 3 pneumatic clamps, oil-bath guides, and PLC touch panels. Spares cover rollers, proportional valves, and drives.

  • Length to 3 m, thickness to 100 mm
  • B10KK: 10 or 12 heads
  • 3 pneumatic clamps & rollers
  • Servo drives & PLC touch panel

WMKK Articulated-Arm Machines

Multifunctional WMKK-14.0-01-MULTINOVA and servo WMKK-14.0-02-AUTOMATIC mill, drill, grind, and contour stone slabs up to 300 mm thick on a 2000×1000 mm zone. Spindles run 150–10,000 rpm with closed-loop water cooling. Spares include high-speed spindles, quick chucks, servos, and water sensors.

  • 2000×1000 mm zone, up to 300 mm
  • Spindle 150–10,000 rpm
  • Quick-change tool chuck
  • Closed-loop cooling & sensor

How to Select ZPU PROMASZ (PROMASZ) Stone Processing Machinery

Selecting a ZPU PROMASZ (PROMASZ) machine starts with matching workpiece format (raw block, slab, or edge profile) to cutting thickness, table footprint, and CNC or PLC automation.

Primary block cutting up to 3500×1800×1760 mm is handled by PLBK-14.0-1800, 5-wire PLBK-14.0-5000, or the 55 kW multi-blade PW5TK1600.

Slab formatting uses PW1TK single-column saws (Compact, Twist, PLC, 5/6-axis ESA CNC), PP2TK18-14.0-600 dual-support saws, PW4TK (2–7 carriages), or WDK-14.0-04 angular cutters.

Surface polishing, chamfering, and milling are covered by AS-14.0 automatics, WGALS multi-head lines, B1PK/B10KK edge polishers, and WMKK articulated-arm machines.

Facility Utilities & ZPU PROMASZ Manufacturing Background

Operating since 1998 with installations across 35+ countries, ZPU PROMASZ manufactures structural assemblies in Pieszyce, Poland using 13 CNC machining centers (5-axis Vision Wide, Mazak, DMF, Doosan) and a 12 kW laser cutter.

Standard site preparation requires 3×400 V + N + PE power (5×6 mm² copper feed, 63 A main isolator, D25–D40 or C32 breakers), ≥120 mm² grounding strap, water supply, and compressed air routed to the stainless control cabinet side.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.