Vickers by Danfoss Hydraulic Pumps and Valves

V/VQ vane pumps, PVM piston pumps, DG4V directional valves, M series motors and motor pump assemblies. Equipment and parts selection by technical configuration.

V Series Vane Pumps and Cartridges

Vickers V pumps serve presses, power units and injection molding machines. The modular design uses a replaceable intra-vane cartridge. Single and double pumps differ in shaft, housing and displacement combinations.

  • 20V, 25V, 35V, 45V and 50V frames
  • Family displacement range 7–193 cm³
  • Continuous pressure up to 207 bar
  • Double pumps 2520V, 3525V, 4535V

VQ Series Mobile Vane Pumps

VQ pumps address medium-pressure mobile hydraulics. Their intra-vane cartridge supports servicing of the pumping element. Applications include wheel loaders, lift trucks, refuse trucks and aerial booms.

  • Fixed-displacement VQ vane pumps
  • Displacement 18–193 cm³
  • Continuous pressure up to 210 bar
  • Serviceable intra-vane cartridge

PVM Open-Circuit Piston Pumps

PVM pumps use variable-displacement axial piston technology in open circuits. Code A and Code B have different displacement ranges and construction details. Controller and shaft-seal selection depends on the pump design generation.

  • PVM Code A: 18–141 cm³
  • PVM Code B: 10–141 cm³
  • Continuous pressure 315 bar
  • Variable-displacement axial piston design

DG4V Directional Valves and Coils

DG4V valves direct flow to cylinders or hydraulic motors. DG4V-3 uses direct solenoid actuation, while DG5V versions use pilot operation. Selection covers the spool, coil, connector and mounting subplate.

  • DG4V-3: D03/NG6
  • DG4V-5: D05/NG10
  • Viton or nitrile seal options
  • DIN, Deutsch and AMP connectors

Pressure Control and Unloading Valves

Vickers pressure valves provide relief, reduction, sequencing and unloading. The range includes subplate and in-line mounting. Remote control and venting options must match the circuit, with the selected pressure setting checked under load.

  • Pressure relief and reduction
  • Sequence control
  • Subplate or in-line mounting
  • Remote control and venting options

Flow Control Valves and Restrictors

Vickers flow controls regulate actuator speed through volumetric flow. The range covers pressure and temperature compensated controls and adjustable restrictors. Bypass and restrictor versions differ in their integral relief arrangement.

  • Pressure and temperature compensation
  • Adjustable flow control
  • Bypass-type arrangements
  • Restrictor-type arrangements

M Series Industrial Vane Motors

M series motors turn hydraulic flow into rotary power with constant torque. Their modular construction gives access to the working element for service. Flange and foot mounting options suit conveyors and injection molding equipment.

  • M series vane technology
  • Displacement 44–317 cm³
  • Continuous pressure 172 bar
  • Flange or foot mounting options

Hydraulic Motor Pump Assemblies

Vickers by Danfoss combines pump and electric motor in an assembled unit. Coupling and bell-housing integration or compact splined connections are available. Cooling and mounting arrangements are selected for the hydraulic power unit.

  • Asynchronous induction motors
  • Coupling and bell-housing integration
  • Compact splined connection
  • Low-noise configuration options

Choosing V, VQ or PVM Pumps

V vane pumps serve industrial hydraulic systems, while VQ addresses medium-pressure mobile machines. PVM provides variable displacement in an open circuit.

The operating point, control scheme and prime mover determine the suitable design; matching dimensions alone do not establish interchangeability.

Valve Interface and Control Compatibility

DG4V selection combines mounting size, spool function, coil voltage and connector. Pilot-operated DG5V additionally requires matching pilot supply and drain arrangements. Pressure and flow controls are selected for their circuit function, hydraulic fluid and load cycle.

Integrating a Motor Pump Assembly

A coupling and bell-housing arrangement differs from compact splined integration. Selection covers mounting, cooling and the installation envelope. Replacing an existing power unit also requires checking suction and drain connections against the intended circuit.

Vickers and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Vickers and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.