Nomura DS Swiss-type lathes and components

Select Nomura DS sliding-head lathes, tooling and spindle components around workpiece material, geometry and the required machining operations.

NN-16SB7 sliding-head lathe

The slanted tool post helps remove chips. A rear X axis supports overlapping work and back machining. ER11 and ER16 live-tool units, a synchronous rotary guide bush and Mitsubishi M70V control form the tooling platform.

  • Diameter up to 16 mm
  • 160 mm with fixed guide bush
  • 110 mm with rotary guide bush
  • Up to 20 tools with options

NN-16SB6 Type3 automatic lathe

Type3 combines turning, cross drilling and back machining. Double drill holders use ER11 collets. The spindle clamping assembly includes a P16 sleeve, spring and cap, while fixed and rotary guide bushes give different machining lengths.

  • Diameter up to 16 mm
  • 16 standard tools
  • Fixed guide bush: 160 mm
  • Rotary guide bush: 110 mm

NN-20U5 automatic lathe

This model focuses on main-side machining. The tool post uses scraped sliding guideways. ER16 holders and a built-in main spindle motor form the machining arrangement; the larger 25 mm diameter is an optional configuration.

  • 20 mm diameter, optional 25 mm
  • Up to 200 mm per chucking
  • 13 standard tools
  • Mitsubishi M70V control

NN-20UB8 automatic lathe

The main tool post accommodates turning holders and ER16 live tools. A rotary back-tool unit is optional. A synchronous rotary guide bush, main spindle cooling and replaceable spindle clamping components complete the machine arrangement.

  • 20 mm diameter, optional 25 mm
  • Up to 200 mm per chucking
  • 17 standard tools
  • Optional rotary back-tool unit

NN-32UB8 automatic lathe

This UB8 version handles a larger bar diameter. The Y1 table uses a sliding guide. The main side carries turning, drilling and cross-drilling tools with ER16 holders; the rear arrangement includes drilling and live-tool positions.

  • Diameter up to 32 mm
  • Up to 190 mm per chucking
  • Up to 19 tools
  • 3.7/5.5 kW main spindle motor

NN-20J2 automatic lathe

Main and back spindle motors have matching published power ratings. The layout includes Y axes on both sides. Mitsubishi M70V control coordinates machining, while optional tool units extend drilling and milling configurations.

  • Diameter up to 20 mm
  • Up to 200 mm per chucking
  • Up to 26 tools
  • Both spindles: 1.5/3.7 kW

NN-32YB2 automatic lathe

The YB arrangement combines C-axis control with main and back spindle synchronisation. Live tools operate on both sides. Rear tool units differ in turning, drilling and live-tool layout, and a conveyor removes finished parts.

  • Spindle synchronisation
  • ER16 and ER20 tooling
  • Alternative rear tool units
  • Finished-parts conveyor

NN-32YB2 XB automatic lathe

The XB version adds a swivelling B-axis tool unit. Its movement within 135° supports angled machining features. The arrangement includes main spindle cooling, a synchronous rotary guide bush and a conveyor for finished parts.

  • Diameter up to 32 mm
  • Up to 190 mm per chucking
  • Up to 33 tools
  • B-axis unit swing up to 135°

Selecting a sliding-head lathe

Nomura DS makes Swiss-type lathes with a moving headstock. A guide bush supports the bar close to the cut. Machine selection compares bar diameter, machining length per chucking, access to the back of the workpiece and the required live-tool layout.

NN-16SB7 handles diameters up to 16 mm. Its stated length is 160 mm with a fixed guide bush or 110 mm with a rotary guide bush. NN-20U5 and NN-20UB8 offer 25 mm capacity as an option beyond their 20 mm configuration. NN-32UB8 is rated for 32 mm diameter and 190 mm per chucking.

Back machining and angled features

NN-20J2 has Y axes on the main and back sides. Live-tool configurations extend machining operations within the machine. NN-32YB2 rear tool units differ in the arrangement of turning, drilling and powered positions.

NN-32YB2 XB adds a B-axis unit that swings within 135° and accommodates up to 33 tools. Selection depends on feature angles, tool projection and access to the work zone. A B axis alone does not establish the available machining envelope.

Tooling and replacement components

The spindle clamp, guide bush and tool holder have different functions. NN-16SB6 Type3 documentation identifies P16 clamping components, ER11 holders and optional ER16 units. The optional rotary back-tool unit on NN-20UB8 changes the permitted unloading length.

Configuration checks cover fixed or rotary bushes, holder interfaces, rear live-tool positions, cooling and finished-part removal. Component compatibility follows the model, serial configuration and machine documentation.

Configuration and project scope

SpareX selects equipment and components around the machining task. The comparison covers workpiece material, drawing, output target, tooling and site utilities. Published parameters apply to the stated configurations; some machining capabilities are specified using SUS303.

Nomura DS and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Nomura DS and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto in Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.