HEAD Waterjet machines, pumps and spare parts
Specify HEAD Waterjet cutting machines, intensifier pumps and components for your material, production layout and installed equipment.
HEAD3060BA gantry platform
HEAD3060BA is designed for thick metal cutting. Its working area measures 3000 × 6000 mm. Replacement assemblies are specified against the installed drive, cutting head and abrasive feed configuration.
- 3000 × 6000 mm working area
- Optional 5AB/5AC heads
- Abrasive supply system
- Automatic lubrication
HEAD1530BB cantilever machine
HEAD1530BB uses a cantilever layout for waterjet cutting. Listed materials include stainless steel, brass, aluminium, stone, plastic and glass. Selection follows the installed high-pressure system and machine records.
- Cantilever machine layout
- Stainless steel and brass
- Stone, plastic and glass
- Configuration-specific selection
HEAD 420 MPa intensifier pump
The pump has a rated pressure of 420 MPa and a working range of 50–380 MPa. Its table specifies a 37 kW motor and maximum delivery of 3.7 l/min. Seals and valves are selected for the installed intensifier.
- Rated pressure 420 MPa
- Working pressure 50–380 MPa
- Main motor 37 kW
- Maximum delivery 3.7 l/min
Cutting heads 60027 and 60099
The HEAD parts list identifies cutting heads 60027 and 60099. They are separate waterjet system items. Selection requires photographs of the connection, the on/off valve arrangement and the components in the existing assembly.
- Cutting head assembly 60027
- Cutting head assembly 60099
- Connection photographs
- Assembly scope verification
Water orifices and abrasive tubes
The list separates water orifice 60029 from abrasive tubes 60006 and 60007. These items perform different functions in the cutting head. A request should include markings, dimensions and a photograph of the installation seat.
- Water orifice 60029
- Abrasive tube 60006
- Abrasive tube 60007
- Installation seat dimensions
On/off valve inspection
HEAD lists valve body 60024, needle 60021 and poppet seat 60022. Leakage or incomplete closure calls for inspection of mating parts. Selection starts with the assembly drawing and a description of when the fault occurs.
- On/off valve body 60024
- Valve needle 60021
- Poppet seat 60022
- Assembly drawing and photos
Seals and high-pressure cylinder
The list includes U-ring 70024 and high-pressure cylinder 70004. Repair scope follows inspection of the mating surfaces. Identification is checked against the intensifier drawing, with the required quantity recorded separately.
- U-ring 70024
- High-pressure cylinder 70004
- Mating surface inspection
- Drawing-based repair scope
HEAD3060BA options and integration
HEAD3060BA options include laser height measurement, a drill module and abrasive removal. Integration depends on the installed layout. An upgrade enquiry needs the control diagram, software version and current module list.
- Laser height measurement
- Optional drill module
- Abrasive removal system
- Control system compatibility
Selecting a waterjet system for your production task
Start with the material, blank dimensions and required finished result. Sheet metal, glass, stone and polymer jobs call for different process decisions. Include a drawing, material grade, thickness, edge requirements and expected production mix.
If a machine is replacing an existing process, explain the current limitation. Difficult loading, a restricted working area and an unreliable abrasive supply are different problems and should lead to different configuration decisions.
SpareX reviews the cutting platform, pump, cutting head and optional modules as one system. Each item needs a defined supply scope and connection requirements. A representative sample and an agreed test method help relate the proposed equipment to the actual application.
A general description of waterjet technology does not establish performance on every material or part.
HEAD3060BA platform and production layout
HEAD3060BA has a working area of 3000 × 6000 mm. This describes the processing area rather than the complete installation footprint. Allow space for loading, maintenance and access to the pump unit.
A site layout, a description of material movement and the intended lifting arrangement make the installation review more useful. Review the route taken by a blank as well as the space occupied by the machine.
The manufacturer lists abrasive supply, automatic lubrication and optional 5AB/5AC cutting heads. The proposed specification should identify the selected configuration of each assembly. For an installed machine, check the actual equipment records.
A current catalogue description should not be assumed to match every earlier machine carrying the same model designation.
HEAD1530BB cantilever configuration
HEAD1530BB is described as a cantilever waterjet machine. The manufacturer lists stainless steel, brass, aluminium, stone, plastic and glass among its cutting materials. These names alone are insufficient to define a process.
Supply the material grade, thickness, part geometry and required edge condition. For a varied workload, include representative parts rather than one unusually easy or difficult example.
Compare the complete configuration rather than the model name alone. The pump, cooling arrangement, cutting head, controls and abrasive supply work together. For replacement parts on an existing HEAD1530BB, provide its serial number and photographs of installed assemblies.
Details of previous repairs or upgrades are especially useful when the machine differs from its original documentation.
Pump ratings and the required operating point
The HEAD 420 MPa pump table distinguishes its 420 MPa rated pressure from its 50–380 MPa working pressure range. It lists a 37 kW main motor and maximum delivery of 3.7 l/min. These values belong to the described pump configuration.
Maximum delivery should not be treated as available at every pressure setting. The production task needs a reviewed operating point for the complete system.
Identify the pump, cutting head, number of simultaneously active cutting stations and intended duty. A replacement pump enquiry also needs connection details, control information and available installation space.
Agree the equipment scope before ordering, including utility connections and installation boundaries. An individual intensifier is identified by its own documentation and markings rather than by the machine brand alone.
Cutting components and replacement item lists
HEAD lists cutting heads 60027/60099, water orifice 60029, abrasive tubes 60006/60007, valve body 60024, needle 60021 and poppet seat 60022 as separate items. Prepare a line-by-line list with quantities. When requesting a complete cutting head, establish which internal parts are included.
This prevents the same component being counted both inside an assembly and as a separate spare.
U-ring 70024 and high-pressure cylinder 70004 require identification against the installed intensifier drawing. Similar appearance and a shared brand name do not establish interchangeability. Include photographs, markings and the relevant drawing position.
If an assembly was replaced previously, identify what is currently operating on the machine. Complete that comparison before confirming a purchase.
Options and control system integration
The HEAD3060BA description includes laser height measurement, a drill module and abrasive removal options. In a new project these belong in the specification alongside the basic machine.
An upgrade of installed equipment requires a separate review of mechanical connections, available space, electrical interfaces and software configuration. An option appearing in a catalogue does not prove that it fits every earlier machine.
Explain the production problem that the module should solve. For control work, provide diagrams and software versions. A useful quotation separates equipment, installation, configuration and the verification scenario.
This makes the proposed scope clear to both the purchasing team and the person responsible for integrating the assembly into the current process.
Sample evaluation and equipment acceptance
Provide the part drawing, actual material and finished-part requirements for technical review. Agree which surfaces will be assessed, how the result will be recorded and which operating conditions need to be reproduced. A representative sample connects a machine proposal to a real production task.
Capabilities from different pump or cutting head configurations should not be combined into one universal performance claim.
When comparing proposals, check the platform, high-pressure system, abrasive supply, cooling and optional modules. Establish the required documentation, packaging, installation and training scope. For equipment entering an existing line, identify responsibility boundaries and connection points.
The technical agreement should be usable by the buyer and the specialist accepting equipment at the destination site.
Quotation information and supply planning
State the destination country and city, the equipment scope, processing material and a technical contact. A spare parts enquiry can start with markings and photographs before the drawing is added. A new machine project needs a working area, site layout and process requirements.
Separating the base machine, options and spare components makes the quotation easier to check.
Before confirming the specification, compare each item with the production task. An assembly needs an explicit internal component list; a module needs agreed connections and configuration work. Installation, training and sample evaluation should be listed separately when required.
The equipment specification should let the receiving team verify the supplied assembly and its role in the system.
HEAD Waterjet and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of HEAD Waterjet and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for BFT / BFT GmbH
- Equipment and parts for Bystronic
- Equipment and parts for KMT Waterjet Systems / KMT Waterjet
