Xinxiang Jinrui Machinery / Kunwei Equipment
Industrial DJ sidewall conveyors, DTII and TD75 fixed belt conveyors, DY mobile loaders, LS/GX screw conveyors, and ZG/K1-K4 feeders by Xinxiang Jinrui Machinery / Kunwei.
DJ Sidewall Belt Conveyors
DJ open and closed sidewall conveyors lift coal, coke, fertilizer, and chemical pellets up to 90 degrees. Belt widths span 500 to 1400 mm at 30 to 400 t/h. Hot-vulcanized NBR/EPDM belts, T/TC cross cleats, and SS304/SS316 enclosures handle corrosive dust.
- Up to 90-degree lift
- Belt width 500-1400 mm
- Capacity 30-400 t/h
- NBR/EPDM, SS304/SS316
DTII & TD75 Fixed Belt Conveyors
DTII and DTII(A) conveyors use channel or I-beam frames across 500 to 2400 mm belt widths with labyrinth idler seals. TD75 units (500 to 1400 mm, up to 3000 t/h) follow metric standards. Replacement pulleys, rollers, bearings, and belt scrapers fit both lines.
- DTII width 500-2400 mm
- TD75 up to 3000 t/h
- Labyrinth idler seals
- ISO/DIN metric parts
Heavy Belt Trippers & DY Mobile Units
Heavy-duty belt trippers operate on P38 and P43 rails at 2.5 to 5.8 m/s belt speed and 800 to 6000 t/h throughput, with 800/1000/1250 mm pulleys and CCO liners. DY mobile conveyors on pneumatic tires adjust height for truck and container loading.
- 800-6000 t/h tripper flow
- P38 / P43 heavy rails
- 800-1250 mm bend pulleys
- DY pneumatic tires
LS, GX & Shaftless Screw Conveyors
LS screw conveyors built to JB/T7679-95 seal fine powders like cement and fly ash while isolating head and tail bearings outside the shell. GX units (150 to 600 mm screw diameter), U-troughs, and shaftless spirals handle dry, sticky, or granular bulk loads.
- LS standard JB/T7679-95
- GX diameters 150-600 mm
- External end bearings
- Shafted & shaftless
ZG Vibrating, K1-K4 & Star Feeders
ZG motor vibrating feeders use vibration motors and damping springs for continuous silo discharge to screens and crushers. K1-K4 reciprocating feeders with a 5-degree pan and fluid coupling reach 1200 t/h on coal; star dischargers seal negative-pressure outlets.
- K1-K4 up to 1200 t/h
- 5-degree pan, fluid coupling
- ZG motors and springs
- Rotary star dischargers
Rollers, Drum Motors & Sidewall Belts
Factory spares include 30-degree grooved roller sets, parallel, centering, reversing, ceramic, and rubber-coated rollers with robot-welded housings. Motorized electric pulleys enclose motor and reducer inside the drum; sidewall belts use secondary vulcanized cleats.
- 30-degree grooved sets
- Robot-welded housings
- Enclosed drum motors
- Vulcanized sidewall belts
Selecting Xinxiang Jinrui Machinery / Kunwei Bulk Handling Systems
Henan Kunwei Machinery Co., Ltd., also known as Xinxiang Jinrui Machinery Factory (Xinxiang, Henan, China; ISO 9001 since 2005), manufactures bulk conveying, feeding, and unloading lines engineered via CAD.
Equipment selection starts from material bulk density, lump size, conveying distance, elevation angle, and target hourly throughput.
For high-capacity mining, power-plant, and port terminals (500 to 2400 mm belt widths), heavy-duty DTII / DTII(A) fixed conveyors pair with P38/P43 rail belt trippers rated for 800 to 6000 t/h. Where plant footprint is constrained, DJ closed-type sidewall conveyors lift up to 90 degrees with NBR/EPDM belts and SS304/SS316 housings, while LS screw conveyors built to JB/T7679-95 isolate end bearings for sealed powder flow.
Technical Parameters for Line Configuration and Spares
When specifying TD75, DTII, DJ, or DY mobile belt conveyors, buyers define material properties (coal, iron ore, clinker, fertilizer, grain, or chemical pellets), belt width, speed, and dust-enclosure requirements.
Heavy trippers accommodate steel cord (ST) belts with 800/1000/1250 mm pulleys, hydraulic storm brakes, ceramic pulley lagging, and CCO or high-alumina ceramic chute liners.
Upstream feeding and discharge rely on ZG vibration-motor feeders, K1-K4 crank-linkage reciprocating feeders up to 1200 t/h with fluid couplings, and planetary star dischargers with externalized bearings away from high-temperature dust.
Xinxiang Jinrui Machinery / Kunwei and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Xinxiang Jinrui Machinery / Kunwei and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for XEMC / Xiangtan Electric
- Equipment and parts for Xiamen YangSen NC Equipment
- Equipment and parts for Solid Sealing Technology
- Equipment and parts for Xiamen Unicreed Electronics
Documents and sources
- About Henan Kunwei Machinery / Xinxiang Jinrui Machinery Factory
- DJ series 90-degree closed vertical sidewall conveyor specification
- Closed large-inclination belt conveyor site specification (650 mm, 22 m)
- DTII and DTII(A) fixed belt conveyor specification
- TD75 fixed belt conveyor specification
- Heavy-duty belt tripper unloading trolley specification
- DY series mobile belt conveyor specification
- LS type screw conveyor specification (JB/T7679-95)
- GX screw conveyor specification (150-600 mm)
- ZG type motor vibrating feeder specification
- K-type reciprocating feeder specification (K1-K4)
- Star discharger rotary airlock valve specification
- Grooved roller set specification (30-degree trough)
- Motorized electric pulley drum drive specification
- Corrugated-edge conveyor belt specification
- Factory conveyor spare parts catalog
