Lindauer DORNIER weaving machines and film stretching lines
Technical selection of Lindauer DORNIER GmbH (Germany) equipment: P2 rapier and A2 air-jet weaving machines, BOPET and BOPP film stretching lines, composite systems.
P2 rapier weaving machine
P2 is a DORNIER rapier weaving machine with positively controlled center transfer of the weft. Nominal width up to 540 cm, speed up to 600 picks per minute. Modular design; fabrics from fashion to technical: aramid, glass and carbon fabrics, filtration fabric, PVC coated mesh.
- P2 width: up to 540 cm
- P2 speed: up to 600 picks/min
- Weft insertion: rapier, center transfer
- P2 fabrics: aramid, glass, carbon
A2 air-jet weaving machine
A2 is a DORNIER air-jet weaving machine: the weft is transported by a stream of air, not by mechanical elements. Nominal width up to 540 cm, speed over 1,000 picks per minute. Fabrics for airbags, sun screens, high fashion and tire cord.
- A2 width: up to 540 cm
- A2 speed: over 1,000 picks/min
- Weft insertion: air nozzles
- A2 fabrics: airbag, tire cord
BOPET film stretching lines
DORNIER stretching lines for BOPET film; production material PET and PA (shrink). Film width up to 10.6 m, line speed up to 650 m/min. Chain track system with roller clips in SS-DC, MD-Relax and HX-9 versions; oven with heat recovery, drawer system for quick roller changes in longitudinal stretch.
- BOPET film width: up to 10.6 m
- BOPET line speed: up to 650 m/min
- BOPET chain track: SS-DC, MD-Relax, HX-9
- BOPET material: PET, PA (shrink)
BOPP film stretching lines
DORNIER lines for BOPP polypropylene film: packaging films and capacitor films for the electrical and packaging industries. Film width up to 10.6 m, line speed up to 650 m/min. Chain track system with roller clips in SS-DC and HX-9 versions.
- BOPP film width: up to 10.6 m
- BOPP line speed: up to 650 m/min
- BOPP chain track: SS-DC, HX-9
- BOPP films: packaging, capacitor
P2 Roving weaving machine
P2 Roving is a rapier weaving machine for reinforcement fabrics from carbon, glass and aramid fibers. Width up to 280 cm, speed up to 420 picks per minute. P2 Mono Roving has a single-sided mono rapier; P2 Mono Roving ZT inserts weft up to 10 mm wide without twist.
- P2 Roving width: up to 280 cm
- P2 Roving speed: up to 420 picks/min
- Carbon roving: 1K–48K
- Glass and basalt: up to 2,400 tex
TRITOS PP 3D weaving line
TRITOS PP produces complex-shaped and multi-layer fabrics for composite reinforcements. Nominal width 240 cm, speed up to 150 picks per minute, mono rapier system. The electronic fabric guide EFG allows fabrics up to 100 mm thick; DORNIER Weft Saver reduces weft waste.
- TRITOS PP width: 240 cm
- TRITOS PP speed: up to 150 picks/min
- Fabric thickness with EFG: up to 100 mm
- TRITOS PP take-off: automatic HTO
PROTOS TW tape weaving machine
PROTOS TW weaves tapes into semi-finished products for thermoset and thermoplastic composite components. Width up to 320 cm, speed up to 100 picks per minute, weft up to 25 mm wide without twist, two freely programmable weft channels. Integrated fabric fixation bonds meltable tapes.
- PROTOS TW width: up to 320 cm
- PROTOS TW speed: up to 100 picks/min
- Weft tape width: up to 25 mm
- PROTOS TW tapes: UD prepregs
PROTOS TP/TPD tape production line
PROTOS TP/TPD makes unidirectional fiber-reinforced tapes roll-to-roll in a continuous process at up to 15 m/min. PROTOS TP produces fully impregnated thermoplastic UD tapes; PROTOS TPD produces bindered dry tapes and spread tows. Fibers: carbon, glass, aramid.
- PROTOS TP/TPD speed: up to 15 m/min
- PROTOS TP: impregnated UD tape
- PROTOS TPD: bindered dry tape
- Fibers: carbon, glass, aramid
Choosing Lindauer DORNIER equipment
Lindauer DORNIER GmbH is a German family-owned manufacturer of machinery for the textile, plastics and composite industries.
The company was founded in 1950, when it also presented the first DORNIER DoTex shuttle weaving machine; its origin lies in Dornier Metallbauten, the aircraft company of Professor Claude Dornier.
DORNIER machines and lines are manufactured in Germany: the main plant in Lindau and a second one in Esseratsweiler (Achberg), where film stretching lines and drying systems have been built since 1980.
The first film stretching machine left the plant in 1956, series production of rapier machines with weft transfer in the center started in 1968, air-jet machines followed in 1988.
Weaving machines, film lines and composite systems
Weaving machines: the P2 rapier machine (presented in 2015) with widths up to 540 cm and up to 600 picks per minute; the A2 air-jet machine (2023) with widths up to 540 cm and over 1,000 picks per minute.
BOPET and BOPP film stretching lines: film width up to 10.6 m, speed up to 650 m/min, chain track with SS-DC and HX-9 roller clip versions, plus MD-Relax on BOPET.
DORNIER Composite Systems (since 2014): the P2 Roving machine for carbon, glass and aramid fabrics, the TRITOS PP 3D weaving line for fabrics up to 100 mm thick, the PROTOS TW tape weaving machine and the PROTOS TP/TPD unidirectional tape line.
Manufacturer service and myDOX portal
The Lindau service center covers technical and electronic service, training and spare parts; subsidiaries operate in the USA, China, India and Turkey. The Shanghai office opened in 2003, and since 2025 the Huzhou branch has overhauled the clips of film stretching lines.
The manufacturer overhauls TDO clip chains in workshops in Lindau, Huzhou, Charlotte and Mumbai. The myDOX portal (since 2019) works as a 24/7 spare parts store, while DoXWeave and DoXNet network the weaving machines.
Lindauer DORNIER and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Lindauer DORNIER and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Groz-Beckert
- Equipment and parts for Stäubli
- Equipment and parts for Schlafhorst / Saurer
- Equipment and parts for Colines
Documents and sources
- About us — history since 1950
- Locations — plants and subsidiaries
- Rapier weaving machine — P2 model
- Air-jet weaving machine — A2 model
- Film stretching lines — BOPET film
- Film stretching lines — BOPP film
- Roving weaving machine — P2 Roving model
- 3D weaving line — TRITOS PP model
- Tape weaving machine — PROTOS TW model
- Tape production line — PROTOS TP/TPD model
- Service — hotline and Lindau center
- Weaving machine service — repair and software
- Film line service — clip chains
- Chinese website — home page
