Colines Extrusion Lines — Stretch, CPP and Blown Film

Extrusion lines by COLINES S.p.A. (Italy): ALLrollEX stretch film, POLYCAST and BARRIERCAST CPP and barrier film, AIRCAST hygienic film, POLYBLOWN blown film and bubble wrap lines. Selection by film and output.

ALLrollEX and PrerollEX stretch film lines

ALLrollEX 1500, 2000, 3000, 4000 and 4500 flat-die lines produce a finished web from 1 to 4.5 m wide; the series delivers net output from 700 to over 3,000 kg/h of film, typically 8–10 microns thick. Winding covers hand, machine and jumbo reels. PrerollEX makes pre-stretched film in-line.

  • Web width: 1–4.5 m
  • Series net output: 700–3,000+ kg/h
  • Film thickness: 8–10 microns
  • Jumbo reel: up to 60 kg

ALLrollEX 1500 line in HP and SV versions

ALLrollEX 1500 was first launched in 2013 and has over 250 installations worldwide. Its extruder platform covers 5-layer, 7-layer and NANOLAYER structures, and the ALLspeedy IV winder makes reels up to 800 mm in diameter. Both 1500 HP and 1500 SV can be upgraded for in-line coreless reels.

  • Installations: over 250
  • ALLspeedy IV reel: up to 800 mm
  • Structures: 5, 7 layers, NANOLAYER
  • Versions: 1500 HP and 1500 SV

POLYCAST lines for CPP and CPE film

POLYCAST are multilayer flat-die lines for CPP, CPE and barrier films. The 5-layer polypropylene line has a 2,600 mm net width, 15–250 micron film, up to 1,100 kg/h and 300 m/min, a turret winder and room for an MDO unit. The 9-layer line, 2,500 mm wide, uses a Flexiwind II winder.

  • 5-layer PP: 2,600 mm net width
  • Film thickness: 15–250 microns
  • 5-layer output: up to 1,100 kg/h
  • 9-layer: 2,500 mm net width

BARRIERCAST lines and MDO orientation unit

The BARRIERCAST line makes CPP, CPE and barrier film with a machine direction orientation (MDO) unit; the first 5-layer line was sold in China in 1991, the first 7-layer line followed in 2002. MDO rollers have internal infrared heaters. The THICK&THIN calender unit gives CPP film of 15–400 microns.

  • BARRIERCAST: 5 and 7 layers
  • MDO heating: infrared
  • THICK&THIN: CPP 15–400 microns
  • Line layers: 3, 5 or 7

AIRCAST and DIAPERCAST hygienic film lines

AIRCAST and DIAPERCAST lines with an MDO unit produce breathable and non-breathable film for baby diapers, incontinence products, sanitary napkins, technical wear and sportswear. PERFORM-EX extruders have barrier screws and infrared heaters. The first line for breathable film was delivered in 1997.

  • Film: breathable and non-breathable
  • Orientation: MDO unit
  • Winder: FLEXIWIND II
  • Breathable film: since 1997

Blown film lines and the POLYBLOWN family

The POLYBLOWN family of blown film lines was launched in 2021. Blown film extruders are 55–140 mm with 30D and 34D ratio, layflat range 1,200–4,200 mm, die inserts ø 180–1,000 mm, thickness 15–250 microns and up to 1,200 kg/h. Speed is 200 m/min, or 300 m/min with MDO.

  • Extruders: 55–140 mm
  • Layflat: 1,200–4,200 mm
  • Net output: up to 1,200 kg/h
  • Speed with MDO: 300 m/min

Bubble wrap lines and Bubble Guard board

COEX BUBBLE co-extrudes PP, LDPE, TIE and PA6 pellets with up to 4 extruders, POWER BUBBLE uses mono-extrusion, and MAC BUBBLE laminates two films on Teflon-coated cylinders heated by diathermic oil. Bubble Guard lines make alveolar board 1.3–30 mm thick with up to 8 extruders and 5 dies.

  • COEX BUBBLE: up to 4 extruders
  • RP rewinder: reel up to 60 mm
  • Bubble Guard board: 1.3–30 mm
  • Bubble Guard: up to 8 extruders

Extruders, winders and edge trim recovery

Infrared heaters on PERFORM-EX extruders save up to 22% energy versus ceramic heaters, and melt pipe insulation saves up to 32%. BIGMOUTH refeeds cold edge trims in-line, up to 50% of extruder throughput. The ALLspeedy winder is designed for up to 1,000 m/min, FLEXIWIND II for 1,200 mm reels.

  • Infrared heating: up to 22% saving
  • Pipe insulation: up to 32% saving
  • BIGMOUTH refeed: up to 50%
  • ALLspeedy winder: 1,000 m/min

Selecting Colines lines by film and output

The Colines range covers ALLrollEX flat-die stretch film lines, POLYCAST and BARRIERCAST lines for CPP, CPE and barrier film, AIRCAST and DIAPERCAST hygienic film lines, POLYBLOWN blown film lines, bubble wrap and Bubble Guard board lines.

A stretch film line is chosen by finished web width of 1, 1.5, 2, 3, 4 or 4.5 m; series net output runs from 700 to over 3,000 kg/h.

For CPP film, the 5-layer POLYCAST line offers a 2,600 mm net width and up to 1,100 kg/h, while the THICK&THIN calender unit extends CPP thickness up to 400 microns. Blown film lines use 55–140 mm extruders, a 1,200–4,200 mm layflat range and up to 1,200 kg/h.

COLINES S.p.A. manufacturing

The company was founded in 1973 as Colinex by Mario Zorloni and Francesco Lombardini. Since 1978 its main base has been Nibbia (Novara), which builds lines for CPP, barrier, breathable and embossed hygienic film. A plant in Marano Ticino was activated in 2017.

Address: Via Buonarroti, 27/29, 28060 San Pietro Mosezzo Nibbia (NO), Italy.

The group includes ELAV (PLC software and SCADA), NO.EL (re-winding and pre-stretching of film) and the ALLWRAPPER division building orbital stretch film wrapping machines.

In 2004 the Azzate (Varese) site took over air bubble, stretch and multilayer blown film lines and magnetic refrigerator gasket lines: PVC profile extrusion and ferrite strip magnetizing.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.