Woywod / PLASTICOLOR Dosing & Mixing Systems for Plastics Processing

German-engineered PLASTICOLOR 1500–5000 dosing units (70 g/h to 4,800 kg/h), volumetric and loss-in-weight gravimetric mixing stations (+/- 0.5%), colour change systems, controls, hopper loaders, and dryers by Woywod.

PLASTICOLOR 1500, 2500, 3500 & 5000 Screw Dosing Units

The PLASTICOLOR modular system from Woywod covers four dosing unit sizes between 70 g/h and 4,800 kg/h for masterbatch, regrind, virgin granules, and PVC dry blends. Quick-acting latches let the motor swing away for rapid screw changes. Serviceable parts include screws, cylinders, and seals.

  • 70 g/h to 4,800 kg/h
  • PC 1500 / 2500 / 3500 / 5000
  • Quick-acting latches
  • Manual or pneumatic slide

PLASTICOLOR Volumetric & Gravimetric Mixing Stations

Volumetric and loss-in-weight gravimetric mixing stations combine two to eight dosing units with approx. +/- 0.5% accuracy and mixing ratios up to 1:2,000. A static mixer prevents material separation during extrusion or moulding. Replaceable parts include load cells, sensors, and neckpieces.

  • 2 to 8+ components
  • Approx. +/- 0.5% accuracy
  • Ratios up to 1:2,000
  • Loss-in-weight control

PLASTICOLOR Multicomponent Dosing Stations

In Woywod dosing stations, main polymer flows freely into the extruder or injection unit while additives are metered straight into the stream at the neckpiece. Screw speeds synchronize with machine throughput to prevent separation. Wear items include neckpiece slides, drives, and seals.

  • Direct neckpiece dosing
  • Machine speed sync
  • Multi-additive recipes
  • PDC or PPM controls

PLASTICOLOR Rapid Colour Change Systems

Standard PLASTICOLOR colour change systems mount two to eight dosing units on a shared neckpiece for uninterrupted recipe switching on extruders and moulders. Pneumatic neckpiece slides shut off idle channels to prevent trickling. Replaceable parts cover pneumatic valves, cylinders, and seals.

  • 2 to 8+ dosing units
  • Pneumatic neckpiece slides
  • Zero-downtime switchover
  • Low premix waste

Throughput Measurement & Weigh Hopper Assemblies

Woywod loss-in-weight hopper assemblies monitor actual kg/h and g/m throughput to stabilize layer thickness ratios in cable, pipe, and film coextrusion. Optional automatic bulk density detection avoids manual calibration. Serviceable items include load cells, discharge gates, and IPC touch panels.

  • Coextrusion layer control
  • kg/h & g/m regulation
  • Tool-free scale removal
  • Modbus & Profibus links

PC 90-04, PDC & PPM Control Systems

Woywod builds dedicated controls for PLASTICOLOR units, spanning single-unit PC 90-04, modular PDC racks, and master PPM systems with recipe and order logging. Interfaces cover Modbus, Profibus, Profinet, CANopen, and OPC UA. Serviceable parts include control boards, motor drives, and sensors.

  • PC 90-04, PDC & PPM series
  • Modbus, Profibus & OPC UA
  • Automatic screw ID
  • 19-inch rack or desktop

ISP, ITP, IPL & IVL 01 Vacuum Hopper Loaders

Woywod modular stainless-steel hopper loaders convey granules, regrind, and PVC powder: single-phase ISP up to 120 kg/h, three-phase ITP up to 3,000 kg/h, IPL up to 2,800 kg/h, and Venturi IVL 01 up to 130 kg/h. Wear parts include filters, valves, and blowers.

  • ISP up to 120 kg/h
  • ITP up to 3,000 kg/h
  • IPL powder up to 2,800 kg/h
  • Pulse filter cleaning

DDT / IHT Drying Systems & Modular Accessories

Woywod builds closed-loop DDT absorption dryers (up to 40% energy savings), IHT hot-air dryers, and PET crystallizers alongside PLASTICOLOR accessories: powder seals, ultrasonic flow sensors, ionizers, and magnetic separators. Serviceable parts include heaters, desiccant valves, and safety switches.

  • DDT up to 40% energy savings
  • IHT & PET crystallizers
  • Ultrasonic flow monitoring
  • EN ISO 13849-1 cut-off

Single Dosing Units vs. Dosing & Mixing Stations

For introducing masterbatch or single additives into a steady virgin polymer stream, single PLASTICOLOR 1500–5000 dosing units or multicomponent dosing stations mount directly on the machine neckpiece and synchronize screw speed with the extruder or moulder.

When formulations combine multiple components of varying bulk density at ratios up to 1:2,000, volumetric or loss-in-weight gravimetric mixing stations (2 to 8+ units) meter every ingredient simultaneously through a static mixer to prevent separation.

Loss-in-Weight Accuracy & Coextrusion Control

PLASTICOLOR loss-in-weight gravimetric stations and throughput weigh hoppers measure live mass flow in kg/h and g/m, achieving approx. +/- 0.5% dosing accuracy and cutting start-up scrap across cable, pipe, profile, sheet, and blown film lines.

The master PPM control system regulates coextrusion layer thickness ratios, archives production recipes and fault logs, and integrates into plant automation via Modbus, Profibus, Profinet, CANopen, Ethernet/IP, and OPC UA.

Hopper Loading, Drying & Modular Upgrades

Woywod / PLASTICOLOR peripheral packages include stainless-steel vacuum hopper loaders (ISP up to 120 kg/h, ITP up to 3,000 kg/h, powder-ready IPL up to 2,800 kg/h, and Venturi IVL 01 up to 130 kg/h) with automatic pulse filter cleaning.

Closed-loop DDT absorption dryers deliver up to 40% energy savings alongside IHT hot-air dryers and PET crystallizers. Modular frames let plants start with volumetric mixing and upgrade later to loss-in-weight gravimetric control.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.