Farmo Res Thermoforming Machines — PRIMA K7, KN260, SICURA, FARMO DUE
Thermoforming machines and lines by Farmo Res S.r.l. (Italy): PRIMA K7, KN260, SICURA, FARMO DUE for suppositories and single doses, DE-NESTER and RE-NESTER for syringes. Configuration by product and pack.
PRIMA K7 and PRIMA ALU — horizontal forming
PRIMA K7 is a horizontal-forming thermoforming machine for syringes, vials, ampoules, medical devices and single doses. Electronic cam servomotors drive the units; stroke and speed are set on the HMI. Format change is at the front; an electric lifter assists reel change. PRIMA ALU forms aluminium.
- Electronic cam servomotors
- Front format changeover
- Electric reel lifter
- PRIMA ALU: aluminium film
KN260 — compact thermoforming machine
KN260 was designed in the early 1980s and over the years took the place of the R70 series; it has been restyled several times. Its compact aluminium frame fits confined spaces. Components include heating plates, a mould and counter mould with integrated vacuum and lateral forming clamps.
- Heating plates
- Mould with integrated vacuum
- Aluminium frame
- Successor to R70 series
SICURA — vertical forming for single doses
SICURA is a vertical thermoforming machine for single-dose pharmaceutical, cosmetic and food products. Dosing uses a volumetric pumping unit with injector movement. Extra Clean options add ISO 5 laminar flow, antibacterial air filters and UV-C film lamps. MAP sealing lowers oxygen in the packs.
- Vertical forming
- ISO 5 laminar flow
- UV-C film disinfection
- MAP sealing
FARMO DUE — suppository packaging lines
FARMO DUE forms cavities from two reels at once, doses the product and cuts strips. FD5 makes up to 5,000 suppositories per hour, FD11 up to 11,000, FD22 up to 22,000 and the servo-driven FD-EVO up to 30,000. A volumetric pump in 316L stainless steel doses products up to 120°C.
- FD5: up to 5,000 per hour
- FD-EVO: up to 30,000 per hour
- 316L volumetric pump
- Dosing up to 120°C
FARMO DUE FDM — vertical forming for single doses
FARMO DUE FDM packages single-dose pharma products, thermoforming two reels simultaneously. The balcony dosing area allows full inspection and cleaning, and the dosing volume is set from the operator panel. FD11M produces up to 9,000 single doses per hour, FD22M up to 20,000.
- FD11M: up to 9,000 doses/h
- FD22M: up to 20,000 doses/h
- Two reels formed at once
- Dose set on operator panel
DE-NESTER and RE-NESTER — syringes in tubs
DE-NESTER extracts syringes from tubs and nests to feed inspection machines, plunger inserters and labelling machines. RE-NESTER inserts syringes into trays directed to sterilisation. Both run at 200 or 400 syringes per minute, and the BUFFER TUB/NEST system works on FIFO.
- 200 or 400 syringes/min
- FIFO tub and nest buffer
- Tub accumulation systems
- Robotic handling
BIORES — vials and ampoules in corrugated board
BIORES packs vials and ampoules in corrugated cardboard: a set of drums forms the waves, then a bottom sheet adds support and stiffness. Farmo Res patented this forming system in the 1990s. Delta robots handle the product and Farmo Vision cameras check the cutting and linkage area.
- Corrugating drums
- Bottom sheet for stiffness
- Delta robot handling
- Farmo Vision cameras
BLISTER SEALER — contact lens packaging
The BS machine loads preformed packs, doses saline solution, places the lens and checks its presence and integrity. It then seals the film cover with data printing and collects packs ready for the autoclave. Farmo Res designed its first contact lens packaging machine in 1997.
- Saline solution dosing
- Lens integrity check
- Sealing and data printing
- Autoclave-ready output
Selecting a Farmo Res machine by product and pack
Farmo Res builds thermoforming and automatic machines for packaging pharmaceutical products, as well as cosmetic and food products.
Horizontal forming covers PRIMA K7, PRIMA ALU and KN260 for syringes, vials, ampoules, medical devices and single doses; vertical forming covers SICURA and FARMO DUE FDM for single doses and FARMO DUE FD5, FD11, FD22 and FD-EVO for suppositories.
FARMO DUE lines produce from 5,000 to 30,000 suppositories per hour, FD11M and FD22M up to 9,000 and 20,000 single doses per hour. DE-NESTER and RE-NESTER come in versions for 200 or 400 syringes per minute.
Line automation: robots, cameras and cartoning
Servo-driven Farmo Res delta robots handle the product and transfer packs to the cartoning machine. Farmo Vision manages several cameras on the machine or across the whole line and checks product presence and accuracy from the HMI.
BIORES packs vials and ampoules in corrugated cardboard formed by drums; BLISTER SEALER handles contact lens packaging from loading preformed packs to autoclave-ready output. The BUFFER TUB/NEST system works on FIFO at DE-NESTER infeed and RE-NESTER recovery.
Farmo Res and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Farmo Res and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Universal Pack
- Equipment and parts for Harro Höfliger
- Equipment and parts for Gerhard Schubert
- Equipment and parts for P.E. Labellers
Documents and sources
- About Farmo Res — machines since 1964
- Farmo Res history — from the first patent to Cervia
- Customer service — after-sales support
- Sustainability — rPET on PRIMA K7
- Single-dose pharma — moulds and lid pre-cutting
- PRIMA K7 — syringe packaging
- PRIMA K7 — single-dose pharma packaging
- PRIMA ALU — aluminium medical devices
- KN260 — syringe packaging
- KN260 — single-dose pharma packaging
- SICURA — vertical forming
- FARMO DUE — suppository packaging line
- FARMO DUE FD5 — up to 5,000 per hour
- FARMO DUE FD11 — up to 11,000 per hour
- FARMO DUE FD22 — up to 22,000 per hour
- FARMO DUE FD-EVO — up to 30,000 per hour
- FARMO DUE FDM — single-dose packaging
- DE-NESTER — syringe extraction from tubs
- RE-NESTER — syringe insertion into tubs
- BUFFER TUB/NEST — FIFO tub handling
- BIORES cartoner — vials in corrugated board
- BLISTER SEALER — contact lens production
- Contact lenses — first machine in 1997
