P.E. Labellers Labeling Machines: Modular SL, Simpl-Cut, Futura SL, Aurora

Catalogue of P.E. Labellers labeling machines (Italy): Modular SL and Modular CM rotary labelers, pressure sensitive and cold glue stations, Futura SL, Simpl-Cut, Rollmatic and Roll-Line roll-fed machines, Aurora 5.0 and 200SL applicators.

Modular SL Modular Rotary Labeling Machines

Modular SL is a rotary labeling machine with fully interchangeable stations that are replaced in a few steps. Pressure sensitive, hot melt, cold glue, roll-fed and shrink technologies run on one central body. Output ranges from 2,000 to 72,000 bottles per hour.

Output from 2,000 to 72,000 bottles per hour
Stations fixed or mounted on independent carts
Pressure sensitive, hot melt and cold glue units
Raised shutter guards stop the machine instantly

Modular CM Compact Rotary Labelers

Modular CM is a compact modular rotary labeler available in four sizes for low to medium speeds. Pressure sensitive and cold glue stations are interchangeable and swapped to suit the line. Output ranges from 3,000 to 9,000 bottles per hour.

Output from 3,000 to 9,000 bottles per hour
Four machine sizes from small to medium
Interchangeable pressure sensitive and cold glue stations
Speed adapts automatically to container infeed and outfeed

FA-ST Pressure Sensitive Labeling Stations

FA-ST stations apply pressure sensitive labels to front and back, collars and seals at up to 140 m/min. Two stations can run in non-stop mode, so the line keeps running when a roll ends or the backing breaks. Maintenance and cleaning need no tools.

Application speed up to 140 m/min
Memory for up to 999 label types with automatic backup
Single reel, double reel or automatic reel splicing
Deionizers, markers and motorized format changeover

Cold Glue Stations for Paper Labels

Cold glue stations apply pre-cut paper labels, both wrap-around and partial. Up and down guards simplify handling, and format changeover is done without tools. The label magazine can be fitted with automatic loaders for non-stop production.

Wrap-around and partial pre-cut paper labels
Up and down station guards
Tool-free format changeover
Automatic loaders for the label magazine

Futura SL Hot Melt Labelers

Futura SL applies pre-cut wrap-around labels with hot melt. The station has two glue groups with independent tanks and a label magazine, and the Futura unit also fits the Modular SL. Output ranges from 6,000 to 72,000 bottles per hour.

Output from 6,000 to 72,000 bottles per hour
Two glue groups with independent glue tanks
Nordson or Robatech hot melt stations
Cylindrical and shaped containers

Simpl-Cut Roll-Fed Labelers

Simpl-Cut applies roll-fed wrap-around labels with hot melt or pre-glued technology. Glue is applied before cutting, so the drum stays clean, and the blade changes in 10 seconds without tools or adjustment. Output reaches up to 82,000 bottles per hour.

Output up to 82,000 bottles per hour
Blade change in 10 seconds without tools
Hot melt or pre-glued wrap-around labels
Cart-mounted stations connect to Modular SL

Rollmatic and Roll-Line Roll-Fed Machines

Rollmatic is a rotary roll-fed hot melt labeler with a double roll holder and automatic film alignment. Labels are cut by opposing blades, one fixed and one or two rotating. The linear Roll-Line applies OPP wrap-around labels to full and empty cylindrical containers.

Rollmatic: 6,000 to 60,000 bottles per hour
Roll-Line: 3,600 to 22,000 bottles per hour
Fixed and rotating opposing cutting blades
Film tensioning and automatic alignment

Aurora 5.0 and 200SL Shrink Sleeve Applicators

Aurora 5.0 and 200SL apply full body, over-the-cap and partial body sleeves, tamper evident bands and multi-packs. The applicators can be fitted with heat shrink tunnels. Container changeovers are tool-less.

Aurora 5.0: up to 500 containers per minute
200SL: up to 200 containers per minute
PVC, PETG, OPS and PLA films
Five different shrink applications

Choosing a P.E. Labellers Labeling Technology

The technology follows the label type. FA-ST pressure sensitive stations handle partial labels: front, back, collars and seals. Cold glue applies pre-cut paper labels, both wrap-around and partial.

Hot melt on the Futura SL handles pre-cut wrap-around labels, while roll-fed OPP film runs on Rollmatic, Roll-Line and Simpl-Cut. Shrink sleeves, tamper evident bands and multi-packs are handled by the Aurora 5.0 and 200SL applicators.

On the Modular SL, different technologies are combined on one body through interchangeable stations.

Output and Line Layout

Output spans from the compact Modular CM at 3,000 to 9,000 bottles per hour up to Simpl-Cut at 82,000 bottles per hour; Modular SL and Futura SL reach 72,000 bottles per hour.

Machines are built with clockwise or anti-clockwise carousel rotation, and four additional in/out infeed layouts are available for line integration: 90 degrees, front, right parallel and left parallel.

P.E. Labellers runs eight production sites in Italy, the US and Brazil and is a ProMach product brand.

P.E. Labellers and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of P.E. Labellers and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.