Liebherr Components industrial components

Hydraulics, gearboxes, bearings, injection and electric drives from Liebherr Components. Component selection by function and installed version.

Axial piston pumps

The range covers open and closed circuits, with single, double and parallel pump arrangements. DPVO and DPVD are separately identified in the published programme. Selection connects circuit design, control arrangement and the installed component version.

  • Open and closed circuits
  • Single and double pumps
  • DPVO pump series
  • DPVD double pump

Axial piston motors

The motor programme distinguishes constant and variable displacement, with single and double versions. A motor enquiry connects the hydraulic circuit to its driven mechanism and the way motion is controlled. Matching a name alone does not define the complete drive arrangement.

  • Constant displacement
  • Variable displacement
  • Single motor arrangements
  • Double motor arrangements

Cylinders and piston accumulators

The portfolio includes standard and large cylinders, piston accumulators and shock absorbers. Lightweight and customised solutions form separate options. Replacement scope is connected to mounting points, working function and the specific construction of the installed assembly.

  • Standard hydraulic cylinders
  • Large hydraulic cylinders
  • Piston accumulators
  • Shock absorbers and custom solutions

Gearboxes and drive transmissions

The range lists slewing and travel drives, planetary plug-in gearboxes, splitter boxes and customised versions. A gearbox belongs to a complete power path, so its input drive, output connection and working mechanism are considered together when defining a replacement.

  • Slewing and travel drives
  • Planetary plug-in gearboxes
  • Splitter boxes
  • Customised gearbox versions

Rope winches and systems

The programme includes compact and heavy-duty winches, gear-ring versions and complete winch systems. The technical package distinguishes drum, drive and mounting connections to the host equipment. Procurement scope should state whether it covers an assembly or the surrounding system as well.

  • Compact rope winches
  • Heavy-duty versions
  • Gear-ring rope winches
  • Complete winch systems

Slewing bearings and rings

The range includes ball, roller, combined and tapered roller designs, slew drives and gear rings. Selection connects the bearing arrangement to loads, installation and mating structures. The specification needs more than an overall diameter or machine category.

  • Ball bearing designs
  • Roller bearing versions
  • Combined constructions
  • Slew drives and gear rings

Fuel injection systems

The programme includes injectors, high-pressure pumps and Common Rail systems, with separate alternative-fuel solutions. Selection follows the engine system and documented component designation, including connections to retained fuel and control equipment.

  • Fuel injectors
  • High-pressure pumps
  • Common Rail systems
  • Alternative-fuel solutions

Electrical and digital components

The portfolio lists electric drives, energy storage, measurement technology, camera systems and digital solutions. Selection connects function to supply, interfaces and machine controls. Record hardware identity and integration requirements together before changing equipment.

  • Electric drive systems
  • Energy storage
  • Measurement and camera systems
  • Digital solutions

Selecting an industrial component

Liebherr Components covers mechanical, hydraulic and electrical drive technology as well as controls. An enquiry should connect the component designation to the equipment in which it operates.

Useful inputs include the complete type code, serial identification, a clear nameplate photograph and a description of the working function. Where a component belongs to a larger assembly, define the replacement boundary.

This separates a component purchase from a complete-machine project and identifies the connections, accessories and controls retained after installation.

Hydraulic circuit and pump control

Open and closed hydraulic circuits call for different arrangements. A pump is considered together with its input drive, control system and flow consumers. Keep the full designation rather than only a short DPVO or DPVD label.

The equipment list should distinguish the main pump, additional sections and connecting elements. Describe machine symptoms separately from the suspected faulty part.

This helps define the hydraulic investigation, agree the replacement package and establish which functions and interfaces must be checked after the assembly is installed.

Motor and driven mechanism

A hydraulic motor connects the fluid-power circuit to a working mechanism. Selection considers displacement control, mounting and the connection to the transmission. Constant and variable displacement represent different system arrangements, so motor type must be related to the actual machine task.

Record installed-unit identification, connections and the operating conditions under which a symptom occurs. When the motor is attached to a gearbox, define the two assembly boundaries separately.

This distinguishes a motor supply from a complete-drive replacement and identifies the mating parts and functions that require verification after the machine is reassembled at the site.

Cylinder mounting and mating structures

A cylinder connects the hydraulic system to the moving structure of a machine. External dimensions alone do not define its version: mounting points, connections and working function also matter. A replacement enquiry should preserve the identification of the actual installed unit.

An agreed inspection can distinguish working surfaces, connecting elements and mating structures. Replacement requires checking installation and interaction with the mechanism.

Define the parts and work package for that particular construction, then relate acceptance to restored movement and inspected connections. The appearance of an assembled cylinder does not by itself establish the condition of the surrounding machine.

Gearbox and winch power path

A mechanical transmission connects the power source to the working mechanism. A gearbox, drum and coupling elements may form one package but perform different functions. State whether the purchase covers an individual gearbox, a winch assembly or a connected system.

Complete identification should be accompanied by input and output connections, mounting information and host-equipment data. Describe noise, heat or irregular movement in the conditions where it appears.

This supports a focused investigation of the power path and helps distinguish transmission condition from external load, control behaviour or a neighbouring mechanism retained after replacement.

Slewing bearing and installation

A slewing bearing works with its support structures and drive. Geometry, fastening arrangement and construction belong to a specific machine. Matching an overall diameter is only one part of checking the complete specification and mating interfaces.

Define the bearing designation, connecting elements and package boundary. If a drive or gear ring is replaced as well, list it separately. Following removal, relate the condition of mating surfaces to the assembly decision.

Verification should address rotation, installation connections and interaction with the equipment in agreed modes, so acceptance covers the serviced construction rather than only one delivered component.

Electrical devices and data interfaces

Electrical and digital components are selected by function, supply and their relationship to machine systems. A camera, measuring device and drive module perform different tasks.

Hardware replacement must therefore be considered together with wiring, interfaces and the installed control configuration. An enquiry should state device identification, version, available messages and the conditions of the fault.

For integration, agree the connections and the function to be demonstrated. This helps distinguish an internal device fault from a communication problem or external signal and defines an observable outcome such as restored measurement, data transfer or controlled movement.

Defining a complete drive package

A drive equipment list follows the power path: energy source, conversion, transmission and working mechanism. It may distinguish a hydraulic motor, gearbox, support components and controls. The supply boundary identifies which of these items are replaced together.

The technical specification compares the proposed package with the retained machine. Record the required data and responsibilities for each interface.

This makes it possible to compare offers with equivalent scope and plan installation without assuming that components with the same general purpose have identical construction. The agreed package should also identify the function to be checked after the connected equipment is assembled.

Injection component and engine system

An injector or high-pressure pump belongs to a particular engine fuel system. Procurement connects component identification to the installed power-unit version. Common Rail and alternative-fuel arrangements should be treated as separate technical cases.

Distinguish the individual product, accessories and required connections. If the request follows a fault, describe the observed behaviour and the conditions in which it occurs.

These inputs define the supply and investigation boundaries, support a documented replacement decision and establish the function to be checked after installation.

Single component or integrated system

A complete system and an individual component require different technical specifications. For a component, identity and mating interfaces are central. A system project also needs equipment interaction, controls and integration responsibilities to be defined.

Separate the main assemblies, connecting elements and site work in the equipment list. If some equipment remains at the plant, include its characteristics and interfaces as project inputs. This allows alternatives to be compared against the same task and links delivery to an agreed package.

Subsequent verification should address the functions specified for the installed configuration rather than treating receipt of equipment as proof of system operation.

Offer scope and acceptance

An industrial-component offer connects the technical version, package contents and installation plan. List assemblies, accessories and agreed services separately. Every replacement item should remain traceable to its original identification and host equipment.

Acceptance considers the delivered product identity, completeness and the functions agreed for verification after installation. Where several components form a project, examine their interfaces together.

Procurement and engineering can then use one specification, distinguish equipment receipt from demonstrated operation and retain useful records for later maintenance.

The acceptance record should state what was actually checked, the operating conditions and any observations requiring a separate decision.

Liebherr Components and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Liebherr Components and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.