Verstegen Grabs (Verstegen Grijpers) — Rope-Operated Bulk Handling Grabs
Custom-engineered mechanical rope-operated grabs and wear parts from Verstegen Grabs (Verstegen Grijpers B.V., Netherlands) for 5–85 t cranes: enclosed, open clamshell, orange peel, and trimming grabs in 450 HB steel.
Enclosed Clamshell Grabs
Enclosed clamshell grabs handle fine and free-flowing bulk cargoes including agribulk, fertilizers, phosphates, coal, and biomass. Sealed 450 HB steel shells minimize dust and spillage for light cargoes such as alumina and soda ash. Replaceable items cover seals, cutting edges, pins, and rollers.
- Agribulk, coal, fertilizer, soda
- Low dead weight, high volume
- 450 HB wear-resistant shells
- Parts: seals, pins, edges
Open Clamshell Grabs
Open clamshell grabs handle heavy, abrasive cargoes such as sand, aggregates, iron ore, clinker, and limestone. Modular 450 HB shells and 800–1000 MPa upper structures boost fill rates under extra closing force. Spares cover edges, plates, bearings, and sheaves.
- Ore, sand, aggregates, clinker
- 800–1000 MPa upper structure
- 450 HB Hardox/Dillidur shells
- Parts: edges, plates, bearings
Orange Peel Grabs
Orange peel grabs handle difficult bulk cargoes including shredder scrap, HMS I-II, compacted scrap, rocks, boulders, biomass, and pig iron. Over 300 units operate worldwide, with optional radiation detection systems. Serviceable parts cover tines, tips, hinge pins, and rope rollers.
- HMS I-II scrap, rocks, biomass
- 300+ units operating globally
- Optional radiation detection
- Parts: tines, tips, pins, rollers
Trimming Grabs
Trimming grabs feature an extremely wide footprint and horizontal closing path to push and collect coarse, high-resistance cargoes such as pig iron, HBI, quartz, limestone, and gypsum. Scraping action aids hold cleanup. Spares cover edges, shoes, links, and bushings.
- Pig iron, HBI, quartz, gypsum
- Horizontal scraping closing path
- Wide footprint for hold cleanup
- Parts: edges, shoes, links, pins
Port and Ship Crane Grabs
Verstegen builds grabs for Liebherr and Konecranes-Gottwald mobile harbour cranes, 5–63 t harbour cranes, and 20–85 t ship unloaders up to 3000 tph. Scope covers 16–63 t floating cranes, 25–50 t four-rope ship cranes, and 90-deg rotators. Spares include sheaves and swivels.
- Harbour 5–63 t, unloaders 20–85 t
- Liebherr and Konecranes-Gottwald
- Up to 3000 tph, 90-deg rotators
- Parts: sheaves, swivels, blocks
Modular Assemblies and GrabSense
Verstegen builds grabs on a modular system with identical hinge bearings and pins across 8 m3 dredging, 10 m3 ore, and 30 m3 fertilizer grabs. Upper frames use 800–1000 MPa steel; GrabSense streams telemetry to desktop and mobile. Spares cover bearings, pins, and sensors.
- Shared hinges across 8–30 m3
- 800–1000 MPa structural steel
- GrabSense desktop/mobile data
- Parts: bearings, pins, sensors
Selecting Verstegen Grabs by Bulk Cargo and Crane Type
Verstegen Grabs (Verstegen Grijpers B.V., Nieuwegein, the Netherlands) has engineered rope-operated mechanical grabs since 1951, with over 12,000 units operating in more than 115 countries worldwide.
Enclosed clamshell grabs protect fine cargoes such as agribulk, fertilizers, phosphates, coal, alumina, and soda ash; open clamshell grabs handle abrasive ores, sand, aggregates, and clinker; orange peel grabs handle HMS I-II scrap, rocks, and biomass; and trimming grabs scrape coarse pig iron, HBI, quartz, and limestone.
Structural Steel 800–1000 MPa and 450 HB Wear Shells
Pulley blocks and upper structural components are built from high-tensile steel (800–1000 MPa) to resist fatigue cracks under continuous fluctuating crane loads.
Complete grab shells—not only the cutting edges—are fabricated from 450 HB wear-resistant steel (Hardox, Dillidur), offering 2 to 3 times higher strength and wear life than standard S355 structural steel.
Crane Load Ranges (5–85 t), Modularity, and GrabSense
Verstegen builds grabs for Liebherr and Konecranes-Gottwald mobile harbour cranes, harbour cranes from 5 to 63 t, floating cranes from 16 to 63 t, four-rope ship deck cranes (25–50 t, 20–38 m outreach), and ship unloaders from 20 to 85 t delivering up to 3000 tph with 90-degree rotators.
A modular building system standardizes hinge bearings and pins across 8 m3 dredging, 10 m3 ore, and 30 m3 fertilizer grabs, while GrabSense provides remote data monitoring. Note: Verstegen Grijpers B.V. (verstegen.net) is unrelated to the Dutch food spices brand Verstegen (verstegen.nl).
Verstegen Grabs and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Verstegen Grabs and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Annovi Reverberi
- Equipment and parts for Hartmann Valves
- Equipment and parts for Varimex-Valves Poland
- Equipment and parts for ENRX
Documents and sources
- Verstegen Grabs official website — manufacturer overview since 1951
- About Verstegen — port applications, wear-resistant shells and bearings
- Verstegen history — modular hinge system (8–30 m3) and GrabSense telemetry
- Enclosed clamshell grabs for agribulk, fertilizer, coal and alumina
- Open clamshell grabs for ore, sand, aggregates and clinker
- Orange peel grabs for scrap metal, stones and radiation detection
- Trimming grabs with horizontal closing path for pig iron and HBI
- Materials engineering — 800–1000 MPa upper steel and 450 HB shells
- Crane compatibility — harbour 5–63 t, ship unloaders 20–85 t, floating 16–63 t
- Grabs for Liebherr and Konecranes-Gottwald mobile harbour cranes
- Grabs for ship unloaders — up to 3000 tph and 90-degree rotators
- Grabs for 4-rope ship deck cranes 25–50 t (20–38 m outreach)
- Legal details and registered office of Verstegen Grijpers B.V.
