Varimex-Valves Poland (Varimex-Valves) Industrial Valves

Sourcing of Polish-manufactured Varimex-Valves Poland industrial gate, globe, check, safety, control, ball, and butterfly valves built to DIN and API standards.

Gate Valves (043, 055, 122, SAK, SKS, SPK)

Series 043/043a, 055/055a, 122, 190s, SPK/SPS, SLS, SKS, and API 600 SAK serve water, steam, and gas. Bodies in GG-25, GGG-40, bronze, GP240GH, A105, 13CrMo4-5, and SS cover DN 4–700 and PN 0.25–40 MPa. Spares include X20Cr13 stems, wedges, stem nuts, and packings.

DN 4–700 / up to DN 1800
PN 0.25–40 MPa / Class 900
DIN & API 600 standards
Flanged, threaded, BW

Globe Stop Valves (ZPZ, ZPR, ZPM, 218M, 422, 649)

Stop valves ZPZ1/2, ZPR1/2, bellow-sealed ZPM2z/2r, 218M, 450M, and HP 422, 430, 649 serve steam and oil lines. Iron, P250GH, GP240GH, A105, and 13CrMo4-5 span DN 6–300, PN 50 MPa, 650 °C. Replaceable trims cover discs, seats, stems, bellows, and packings.

DN 6–300, up to PN 50 MPa
Max temp up to +650 °C
Bellow-sealed 218M / 450M
Discs, seats, bellows, stems

Check & Stop-Check Valves (ZPT, 465, 468, ZKT2)

SDNR valves (215, 216, ZMX/ZMY, 465, 468, 333, 468DP) and check valves (ZPT, ZPS, ZAS, ZWT11, ZKT2/ZKS2, 6534) prevent backflow. GP240GH, P250GH, A105, and SS bodies cover DN 6–300 up to PN 32 MPa. Spares include discs, springs, seats, bellows, and NBR rings.

DN 6–300, up to PN 32 MPa
SDNR 468DP with dashpot
Swing check ZKT2 / ZKS2
Discs, springs, seats, seals

Control Valves (Z, Z1A, Z1B) & Actuators

Control valves Z, Z1A, Z1B (DN 15–300, PN 1.0–40 MPa, Class 150–2500, Kvs 0.01–2160) pair with P/R or NWA-1 drives. Trims in 1.4571 feature stellite or CrN hardening and bonnets down to -196 °C. Spares include plugs, cages, seats, PTFE-V packings, and positioners.

DN 15–300, Kvs 0.01–2160
PN 1.0–40 MPa / Class 2500
EN 60534-4 Class II–VI
Plugs, cages, PTFE-V packings

Safety Valves

Full-lift and proportional spring or weight-loaded safety valves protect steam, air, and gas vessels. Bodies in GG-25, GGG-40, GS-C25, and SS cover DN 20x32 to 400x500 at PN 1.6–10 MPa per DIN. Spares cover springs, discs, seats, and gaskets.

DN 20x32 to 400x500
PN 1.6–10 MPa, DIN standard
Air, steam, gas, marine
Springs, discs, seats, seals

Ball Valves

Two-way, three-way, and multi-way ball valves to DIN and API serve oil, gas, steam, and chemical media. Floating and trunnion designs span DN 6–1000 and PN 1.0–15 MPa (Class 150–900), with optional jackets. Spares include balls, seats, stems, O-rings, and actuators.

DN 6–1000 (1/4"–40")
PN 1.0–15 MPa / Class 900
Floating & trunnion ball
Balls, seats, stems, seals

Butterfly & Diaphragm Valves

Wafer, lug, and flanged butterfly valves (DN 40–2400, PN 1.0–2.5 MPa) in GG-25, bronze, and steel pair with GG-25 diaphragm valves (DN 15–250, PN 0.6–1.6 MPa). Manual or powered drives are supported. Spares include diaphragms, liners, discs, shafts, and bushings.

Butterfly DN 40–2400
Diaphragm DN 15–250
Wafer, lug, flanged ends
Diaphragms, liners, discs

Strainers, Balancing & Pressure Regulators

Y- and T-strainers (DN 15–400, PN 1.0–32 MPa) shield valves from pipeline debris. Balancing valves (DN 15–300, PN 1.6–2.5 MPa) and pressure regulators (DN 15–200, PN 0.05–4.0 MPa) stabilize circuits. Spares include screens, diaphragms, springs, and gaskets.

Y/T strainers up to PN 32 MPa
Balancing DN 15–300
Regulators PN 0.05–4.0 MPa
Screens, diaphragms, springs

DIN & API Standards and Body Material Executions

VARIMEX-VALVES Poland Sp. z o.o. acts as the export office for Polish industrial valve manufacturers, supplying DIN, EN, and API flow-control hardware for water, steam, natural gas, petroleum products, and aggressive chemical media.

Body materials span grey and ductile cast iron (GG-25, GGG-40), bronze, carbon steel (GP240GH, P250GH, A105), alloy steel (13CrMo4-5, 11CrMo9-10), and acid-resistant stainless steel (1.4571, GX5CrNiMo19-11-2).

To prepare an accurate quotation, specify the valve type or figure code (such as 043, 055, ZPZ1, 218M, 468, Z, or SAK), nominal diameter DN, pressure rating PN or ANSI Class, operating temperature, end connection (flanged, threaded, or butt-weld), and required actuator.

Control Valve Sizing, Bonnets, and Trim Hardening

Varimex-Valves Z, Z1A, and Z1B control valves (DN 15–300, PN 1.0–40.0 MPa, Class 150–2500) are sized around flow coefficient Kvs (0.01–2160), flow characteristics (linear L, equal percentage P, modified M, quick opening S), and EN 60534-4 leakage classes II to VI.

Bonnet executions cover standard, cryogenic extension (-196 °C), and bellow seal assemblies alongside PTFE-V, expanded graphite, or TA Luft stem packings.

For flashing, cavitation, or saturated steam service, 1.4571 internal trims are supplied with stellite hardfacing or CrN nitriding and paired with R1B/P1B pneumatic or NWA-1 electric actuators.

Varimex-Valves Poland and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Varimex-Valves Poland and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.