Sugino Machine High-Pressure Pumps and Waterjet Systems

Sugino Machine is a Japanese maker of high and ultrahigh-pressure pumps, waterjet cutters and parts washing machines, founded in 1936, headquartered in Namerikawa, Toyama, with 1,450 group employees.

JCP and JPHP motor-driven plunger pump units

The units run in factories, outdoors and in dusty areas, with models from 6 to 200 MPa. JCP075 gives up to 200 MPa and 400 L/min at 75 kW, the triplex JCP300 up to 1300 L/min, the five-plunger JCP500 up to 2000 L/min at 600 kW. The motor-coupled JPHP reaches 280 MPa.

Pressure up to 280 MPa
JCP500 flow 2000 L/min
JCP300 triplex plunger
Driving power 75–600 kW

HI-JET engine-driven pump units

Plunger pump units for sites with no power supply: peeling, concrete chipping and plant cleaning. JPKP/HI-JET2000 gives up to 300 MPa and 27 L/min, GP11/HI-JET3000ST fits a 3-ton truck, and HI-JET3000DT with two pumps reaches 78 L/min.

Pressure up to 300 MPa
HI-JET3000DT two pumps
GP11 flow 220 L/min
Truck mounting 3–4 t

Water Jet Pump, Aqua Servo and Servo Jet intensifier pumps

A hydraulic intensifier raises water pressure 14 to 20 times above the oil pressure: up to 500 MPa and 13.5 L/min, with models from 19 to 77 kW. The servo-driven Aqua Servo reaches 500 MPa and 4.4 L/min. The oil-free Servo Jet gives up to 600 MPa for food and pharmaceutical lines.

Pressure up to 500 MPa
Servo Jet up to 600 MPa
Power 19–77 kW
Intensification 14–20 times

JPSP, JPKP and GJP stand-alone plunger pumps

Bare pumps of three series for your own units. The compact JPSP gives up to 245 MPa and 108 L/min at 30 kW, JPKP with built-in gears up to 228 L/min, and the high/low pressure switchable GJP up to 70 MPa and 238 L/min. The design targets long life of internal parts.

JPSP pressure 245 MPa
JPKP built-in gears
GJP flow 238 L/min
GJP power 130 kW

NC-5AX and CL-5AX 5-axis abrasive waterjet cutters

An abrasive jet cuts hard materials into any contour. NC-5AX controls the A and B axes within ±10° for complex 3D parts on a 6000 × 3000 mm stroke. The cantilever CL-5AX takes 910 × 1820 mm sheets with a 2000 mm X stroke, ±0.05 mm per 500 mm accuracy and a 500 or 343 MPa pump.

X stroke 2000 mm
Accuracy ±0.05 mm
Pump up to 500 MPa
A and B axes ±10°

Varuna and KATANA2 compact cutters

Varuna combines the pump and the table on 5 m²: 1000 × 750 × 200 mm stroke, 380 MPa, and the frame-integrated structure eases relocation. KATANA2 with an abrasive nozzle from 0.3 mm cuts glass, stainless steel, copper and CFRP, uses 60% less abrasive and needs 3 m².

Varuna pressure 380 MPa
Abrasive nozzle from 0.3 mm
KATANA2 footprint 3 m²
Abrasive use down 60%

JCC deburring and parts washing machines

The CNC Jet Clean Center removes burrs and chips with water jets, up to 245 MPa across the series; JCC 104 WIDE to 421 UT run up to 50 MPa and 29 L/min with a 750 × 500 × 500 mm stroke. U-JET and UT models also wash submerged. Over 6,000 machines went to 30+ countries since 1998.

Series pressure 245 MPa
Over 6,000 machines
Stroke 750 × 500 × 500 mm
Up to 6 tools

Cleaning nozzles and chipping guns

Attachments for high-pressure pumps. The self-rotating 2D Nozzle (JRN) removes scale, rust and soot inside pipes and towers; a magnetic brake holds a speed of 14 to 40 rpm with stepless adjustment. The Single Gun for 245 MPa and 14 L/min weighs 4 kg, chips concrete and removes paint.

JRN nozzle 14–40 rpm
JRN-400PGB up to 400 L/min
Gun pressure 245 MPa
Gun weight 4 kg

Selecting a Sugino Machine pump and system by task

For plant cleaning, chipping and descaling in a factory the choice is a motor-driven plunger pump unit: JCP075 up to 200 MPa and 400 L/min, JCP300 up to 1300 L/min, JCP500 up to 2000 L/min, JPHP up to 280 MPa.

Sites with no power supply use HI-JET engine-driven units: JPKP/HI-JET2000 up to 300 MPa, HI-JET3000DT with two pumps up to 78 L/min. Stand-alone JPSP, JPKP and GJP pumps serve your own units.

Cutting needs intensifier pumps up to 500 MPa or the oil-free Servo Jet up to 600 MPa with NC-5AX, CL-5AX, Varuna or KATANA2 cutters. Parts deburring and washing uses JCC machines with up to 245 MPa across the series, tube cleaning uses the 2D Nozzle (JRN), and concrete chipping uses the Single Gun.

Sugino Machine manufacturing

Sugino Machine Limited was founded on March 1, 1936, with headquarters in Namerikawa, Toyama Prefecture, Japan. Plants operate in Toyama (Hayatsuki and Namerikawa) and Kakegawa (Shizuoka Prefecture), and the group has 1,450 employees. The first Sugino Pump was launched in 1964.

Subsidiaries work in the USA, Mexico, France, Germany, China, Thailand, Singapore, Indonesia and India. The company makes the pump, ultrahigh-pressure piping and cutting head of its cutters in its own plants.

Sugino Machine and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sugino Machine and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.