Water Jet Sweden — Industrial CNC Waterjet Cutting Machines & Systems
Global equipment sourcing for premium CNC waterjet cutting systems manufactured by Water Jet Sweden AB. Machine series T-Model, Premium, Grand, FiveX, and Micro, alongside Beveljet 60 cutting heads and KMT high-pressure pumps delivered worldwide by SpareX.
Flying Bridge Abrasive Waterjet Cutting Machines T-Model
The T-Model system is engineered for dependable two-axis flatbed abrasive cutting across sheet materials. Its flying bridge geometry integrates welded structural steel, a stainless steel water tank, and ballscrews. Control is managed through a Fanuc CNC with an 8.5-inch operator screen.
- Cutting table dimensions of 2 x 3 m and 2 x 6 m supporting table loads of 1200 kg/m2
- Flying bridge layout with protected ballscrew drives on both motion coordinates
- Industrial Fanuc CNC controller paired with intuitive IGEMS CAD and CAM software
- Positioning precision of ±0.05 mm/m with coordinate repeatability of ±0.025 mm
Large Format Heavy Duty Waterjet Cutting Systems Grand
The Grand cutting platform is built for heavy gauge plate processing in steel, stone, and structural armor. Its modular design scales to table lengths of 12 meters with spans reaching 6 meters. The system supports multi-head abrasive cutting powered by pumps operating up to 6,000 bar.
- Gantry widths spanning 2.5 to 6 m with continuous table lengths from 3 to 12 m
- Heavy-duty table structure supporting demanding payload weights up to 3000 kg/m2
- Linear drive motion on primary X travel with precision ballscrew mechanics on Y
- Multi-tool carrier setup with independent CNC positioning for tandem throughput
Five-Axis 3D Waterjet Machining Systems FiveX & FiveX Ultra
The FiveX and FiveX Ultra cutting systems are built for 3D trimming of formed structures, titanium, and aerospace composites. A rigid enclosed enclosure backed by Fanuc Dual Check safety ensures complete protection. Vertical Z-axis travel extends up to a full 1500 mm workspace.
- Extended vertical Z-axis travel accommodating tall structural parts up to 1500 mm
- Enclosed 3D working volume on FiveX Ultra measuring 2080 x 1390 x 650 mm
- Integrated Fanuc Dual Check safety monitoring with sliding protective doors
- WJS 5AX Ultra articulating tool assembly for complex aerospace geometry trimming
High Precision Micro Waterjet Cutting Systems Micro
The Micro system is dedicated to fine part machining requiring tight tolerances and narrow kerfs. Its rigid bed is formed from Bearlit mineral polymer, which absorbs thermal variations and vibrations. Renishaw RESOLUTE invar encoders provide exceptional positioning repeatability.
- Precision 1 x 1 m work table tailored for thin sheet metals and precious alloys
- Mineral polymer bed using Bearlit material with superior damping performance
- Renishaw RESOLUTE RELA invar optical scales providing sub-micron resolution
- Positioning precision of ±0.01 mm per 300 mm and repeatability within ±0.008 mm
Cutting Head Technologies Beveljet & KMT Pressure Pumps
Water Jet Sweden systems integrate pure water PWJ, abrasive AWJ, Beveljet 60, and AlphaJet TVL heads alongside KMT intensifiers. Pump packages delivering 4,000 and 6,000 bar pressure ensure constant hydraulic flow. Readily available nozzles and seals eliminate unwanted line stoppages.
- Multi-axis Beveljet 60 3D cutting heads and AlphaJet TVL taper angle tooling
- KMT Waterjet ultra-high pressure intensifier pump packages at 4,000 and 6,000 bar
- Mixing chambers, abrasive delivery hoppers, and tungsten carbide focusing tubes
- High-pressure seal sets, cylinder liners, poppet check valves, and plungers
Water Jet Sweden CNC Waterjet Machine Technology and Product Matrix
Swedish manufacturer Water Jet Sweden AB engineers high-performance CNC waterjet machine tools powered by Fanuc controls and KMT intensifier pumps.
The platforms execute both pure waterjet and abrasive waterjet processing across metals, titanium, stone, glass, and layered composites with zero heat affected zones.
The machine line includes entry level flying bridge T-Model systems, versatile gantry Premium machines, heavy duty large format Grand tables up to 12 meters, multi-axis FiveX cutting cells with 1500 mm Z-travel, and high precision Micro platforms built on Bearlit mineral composite beds.
Machine Tool Sizing and Ultra High Pressure Intensifier Matching
Selecting the optimal Water Jet Sweden cutting table depends on sheet dimensions, material density, and 3D contouring requirements.
For versatile production workshops, Premium gantry machines configured with Beveljet 60 heads and KMT 4,000 or 6,000 bar pumps offer balanced productivity and bevel capabilities.
Heavy plate operations benefit from Grand series beds supporting loads up to 3000 kg/m2, while intricate component manufacturing relies on Micro systems with Renishaw invar encoders. SpareX provides engineering assessments, cut cycle estimates, and direct international equipment procurement support.
Water Jet Sweden and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Water Jet Sweden and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for 3DCeram
- Equipment and parts for Hiperbaric
- Equipment and parts for SAIREM
- Equipment and parts for IcanClave
Documents and sources
- Water Jet Sweden company profile — cutting technology and 30 years heritage in Ronneby
- Flying bridge waterjet cutting machines T-Model — 2D abrasive specifications
- Premium gantry waterjet cutting systems — versatile Fanuc CNC machine tools
- Heavy duty waterjet cutting machines Grand — large format tables up to 12 meters
- FiveX and FiveX Ultra 5-axis 3D waterjet machines — 1500 mm Z-travel systems
- Micro high precision waterjet cutting machine — Bearlit mineral composite bed
- Cutting head systems Beveljet, AlphaJet and WJS tooling — 5-axis 3D cutting
- Ultra high pressure waterjet pumps KMT — 4000 and 6000 bar technical specifications
- WJS customer service and spare parts — technical support and maintenance agreements
