Sejong Pharmatech Tablet Presses and Capsule Filling Machines

Selection and quotation of Sejong Pharmatech equipment: P130S to P720D tablet presses, F3 to F180 capsule fillers, IW weight checkers, auto coaters, fluid bed dryers and speed mixers.

P130S and P230D Laboratory Tablet Presses

The P130S serves tablet development and clinical batches: plug-and-play setup, automatic weight control (AWC) and a mechanical feeder. The P230D is a compact, lightweight press for single-layer and bilayer tablets with automatic first-layer sampling.

Weight control: AWC
Data integrity: 21 CFR Part 11
P130S feeder: mechanical
P230D: single and bilayer tablets

P210S, P320D and P420S Tablet Presses

The P210S exchanges its turret with a stacker and uses a single-impeller feeder module. The P320D is a small bilayer model with first-layer sampling and AWC. The P420S has built-in turret exchange and automatic weight control and compresses oblong tablets up to 25 mm long.

P210S turret: stacker exchange
P320D: bilayer tablets
P420S turret: built-in exchange
P420S oblong tablets: up to 25 mm

P580D and P720D High-Output Tablet Presses

The P580D uses a load-distribution structure; the maker states a 30% productivity gain, and in bilayer production the press samples the first layer. The P720D is a mass-production model with dust seals that keep powder out of the mechanism.

P580D: 30% higher productivity
P580D: first-layer sampling
P720D: mass production
P720D seals: dust seals

F3, F50, F125 and F180 Capsule Filling Machines

The F3 rejects unseparated capsules by vacuum pressure differential and counts micro tablets with an optical sensor. The F50 adds a vacuum pump, 26% more output and 12% more speed. The F125 has AWC; the F180 has wear-resistant parts with low noise and vibration.

F50 output: 26% higher
F50 speed: 12% higher
F50 and F125 scraper: size #000
F3 rejection: vacuum sensing

IW Series Capsule Weight Checkers

The IW Series checks capsule weight with high-precision weight cells. Its design simplifies maintenance and repair, and a modular layout lets the machine be extended. In an automated line the IW runs together with the capsule filler under one control program.

Sensor: weight cell
Layout: modular
Maintenance: simplified
Data integrity: 21 CFR Part 11

C30, C Series and SFC Series Auto Coaters

The C30 has a built-in heat exchanger and dust collector, a supply and exhaust air system and a dual cover against heat loss. The C Series and SFC Series have an ATEX mechanical explosion-protection design for easy washing and upkeep. The C Series pan can be changed for different processes.

C30: built-in heat exchanger
C30: dual cover
C and SFC: ATEX design
C Series: exchangeable pan

D5L, D5LM and D/DE Series Fluid Bed Dryers

The D5L holds 1 to 5 L, with filter change on removal, top and bottom spray, and a built-in heat exchanger and ejector-type dust collector. The D5LM adds a 1, 3 and 5 L mixer. The D/DE Series has a 12 bar explosion-proof design, powder and particle coating and explosion relief.

D5L volume: 1-5 L
D5LM mixer: 1, 3 and 5 L
D/DE design: 12 bar
D5L spray: top and bottom

SM5C and SM Series Speed Mixers

The SM5C uses interchangeable 1, 3 and 5 L vessels and is easy to operate. The SM Series has an explosion-proof design, an automatic vessel door and a structure for complete discharge of the mix. The SM5C belongs to the lab range with the D5L, D5LM, P130S, P230D, C30 and F3.

SM5C vessels: 1, 3 and 5 L
SM5C vessels: interchangeable
SM Series: explosion-proof
SM door: automatic

Choosing a Tablet Press

For tablet development and clinical batches the maker offers the P130S with a mechanical feeder and AWC and the compact P230D for single-layer and bilayer tablets.

The P210S exchanges its turret with a stacker and uses a single-impeller feeder; the P320D is a small bilayer model with first-layer sampling. The P420S compresses oblong tablets up to 25 mm long, while the P580D and P720D are built for large batches.

Capsule Filling and Weight Checking

The F3 fills capsules with micro tablets: one disk sets different tablet counts and an optical sensor controls the count. The F50 fills powder, liquid, tablets, micro tablets and pellets, including combined filling; the F125 has AWC and the F180 a wear-resistant, low-noise design.

For capsule weight control the maker builds the modular IW Series.

Tablet Coating

The C30 has a built-in heat exchanger and dust collector and a dual cover; its capacity is rated at a density of 0.7 and depends on pan speed and tablet shape. The C Series with exchangeable pans and the SFC Series come in an ATEX mechanical explosion-protection design and are easy to wash.

Drying, Granulation and Mixing

For lab batches the maker offers the D5L at 1 to 5 L, the D5LM with a 1, 3 and 5 L mixer, and the SM5C mixer with interchangeable vessels.

For production there are the D/DE Series with a 12 bar explosion-proof design and powder and particle coating, and SM Series mixers with an automatic vessel door. The granulation line combines the D/DE Series, M Series, CM Series and a vacuum conveyor.

Sejong Pharmatech and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sejong Pharmatech and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.