Wuxi Mingtong Power (Mingtong) Motor Cooling Fans and Coolers
Industrial G-series forced cooling fans, FZB explosion-proof axial units, L-type centrifugal blowers, IC611/IC616/IC81W motor coolers, and rotor components from Wuxi Mingtong Power Industry Co., Ltd.
G-Series External Forced Cooling Fans
G-series external forced cooling fans follow national standard GB/T 22712-2008 for low-voltage VFD motors. Aluminum housing and airflow-optimized blades sustain cooling at low rotor speeds. Single-phase (110–380V) and three-phase (110–1140V) units run in S1 duty.
- GB/T 22712-2008 standard drafter
- 1-ph 110/220/380V; 3-ph 110–1140V
- S1 duty, -15°C to +40°C ambient
- Custom units up to IP56 (incl. ABB)
FZB Explosion-Proof Axial Cooling Fans
FZB series explosion-proof axial fans provide forced cooling for hazardous-area YVP variable-frequency motors. Spark-resistant units comply with Zone 1/2, Class IIA/IIB, and T1–T4 groups under ATEX and IECEx. Rated at 380V (±5%), 50Hz, S1 continuous duty.
- ATEX and IECEx compliance for YVP
- Zone 1 & Zone 2, Class IIA/IIB, T1–T4
- 380V (±5%), 50Hz, up to 1000m altitude
- Ignition temp ≥135°C, -15°C to +40°C
L-Type Side Centrifugal Cooling Blowers
L-type side centrifugal blowers cool motors with double output shafts where rear axial mounting is impossible. The welded steel-plate shell accepts an optional inlet air filter. Units operate on single-phase 110/220/380V at 50Hz across -45°C to +50°C.
- For double-output-shaft electric motors
- L-series right-hand vertical centrifugal
- Welded steel shell with optional air filter
- 110/220/380V 50Hz, -45°C to +50°C
Air-to-Air Coolers and HV Ventilation Boxes
Air-to-air coolers (IC611, IC616) and ventilation boxes serve medium/high-voltage motors and megawatt wind generators. M-type 3–4 row layouts and spirally fluted tubes lower inner air-path pressure drop. Horizontal IMB3 mounting meets GB997 and IEC34-7.
- Closed-loop IC611 and IC616 cooling modes
- M-type tube rows and spirally fluted tubes
- GB1993, GB997, and IEC34-7 IMB3 mounting
- Wind-turbine MW motor cooling units
Air-to-Water Motor and Generator Coolers (IC81W)
Air-to-water coolers (IC81W) mount on top or side of large AC/DC motors and generators with an integrated fan and dust filter. Bimetal extruded tubes resist corrosion and mechanical stress. Floating O-ring stuffing boxes and pin joints prevent thermal-stress leaks.
- IC81W top or side mounting on AC/DC motors
- Bimetal extruded heat-exchange tubes
- O-ring stuffing-box and pin floating joints
- Welded hood with fan and wind-path filter
Fan Blades, Covers, and Rotor Motors (15–550W)
Replacement fan blades (including IC411 shaft-mounted), protective cowls, and rotor motors support fan maintenance. Three-phase covers are produced from iron, aluminum, or sheet steel. External and internal rotor motors span 15–550W, 2/4 poles, insulation Class F, IP55/IP56.
- Rotor motors 15–550W, 2/4 poles, Class F
- IP55 (external rotor) and IP56 (inner rotor)
- Iron, aluminum, and stamped steel covers
- IC411 self-cooling and G/FZB impellers
Engineering Selection of Wuxi Mingtong Power Cooling Units
Selecting Wuxi Mingtong Power forced cooling fans and motor coolers requires matching IEC frame size, IC611/IC616/IC81W cooling code, supply voltage (110V–1140V), IP55/IP56 protection, and ATEX/IECEx Zone 1/2 ratings.
G-series units conform to GB/T 22712-2008 for low-voltage VFD motors, FZB axial units serve hazardous YVP drives at ≥135°C ignition threshold, and L-type centrifugal blowers cool double-shaft motors from -45°C to +50°C.
Closed-Loop Coolers and Motor Fan Assemblies
Medium/high-voltage air-to-air coolers adopt M-type 3–4 row layouts and spirally fluted tubes to lower inner wind-road pressure drop while keeping horizontal IMB3 compliance under GB997 and IEC34-7.
Air-to-water IC81W coolers incorporate bimetal extruded tubes, O-ring floating stuffing boxes, and pin floating joints alongside replacement rotor motors (15–550W, Class F, IP55/IP56), fan covers, and IC411 blades.
Wuxi Mingtong Power and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wuxi Mingtong Power and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for WEG
- Equipment and parts for HANLI / Wuhan Hanli Refrigeration Technology
- Equipment and parts for Würges Vibrationsmotoren
- Equipment and parts for WFL Millturn Technologies
Documents and sources
- About Wuxi Mingtong Power: GB/T 22712-2008 standard and factory output
- Standard three-phase external cooling fans (110–1140V, S1 duty)
- Customized forced ventilation units with IP56 protection
- FZB series explosion-proof cooling fans for YVP motors
- Explosion-proof Zone 1/2, Class IIA/IIB, and T1–T4 compliance
- L-type side centrifugal blowers for double-shaft motors
- Medium-voltage motor air-to-air coolers (IC611, IC616, IC81W)
- Generator air-air cooler M-type tube rows and spiral tubes
- Coolers for megawatt-class wind turbine motors
- Air-to-water coolers with bimetal extruded tubes and floating seals
- External rotor motors 15–550W, IP55, Class F
- Three-phase fan covers in iron, aluminum, and steel
