Wojie CNC Machine Tools and Equipment

Industrial CNC machining centers, turning centers and precision components by Wojie CNC: technical specifications and engineering configuration.

Slant Bed CNC Lathes TCK Series

Wojie CNC TCK series slant bed lathes feature a 45-degree one-piece rigid iron bed engineered for rapid turning of rotation parts. Precision roller linear motion guideways suppress vibration during heavy cutting. Direct and belt drive spindles maintain surface roughness within Ra 0.8.

One-piece 45-degree slant bed structure delivers rapid and unimpeded chip evacuation
High-precision turning spindle with A2-6 or A2-8 nose engineered for heavy cutting passes
Hydraulic self-centering power chuck and programmable tailstock quill for long shaft support
Fast indexing 8-station or 12-station hydraulic tool turret for versatile turning operations

Vertical Machining Centers VMC Series

Wojie CNC VMC series vertical machining centers deliver high-speed milling for precision molds and complex housing components. Rigid base structures and roller guideways withstand dynamic axis loads. The BT40 spindle enables fine surface profiling under demanding feeds.

Wide-span structural base design featuring heavy-duty preloaded linear guide rails
Precision BT40 cartridge spindle engineered with closed-loop fluid cooling system
Twin-arm automatic tool changer mechanism carrying 24 tools with 1.8-second swap time
Base flushing washdown nozzles paired with twin internal screw chip auger conveyors

Flat Bed CNC Lathes CK Series

Wojie CNC CK, CAK and CKE series flat bed lathes are engineered for heavy-duty roughing and finishing of shafts and pipe flanges. Wide induction-hardened bedways deliver cutting stability under high torque. Powerful spindle drives support substantial stock removal per pass.

Induction-hardened and ground prismatic guideways rated at high hardness HRC 52
Swing over bed capacity ranges from 400 mm up to 1250 mm across machine variations
High-torque geared spindle headstock with manual or pneumatic speed range shifting
Heavy-duty 4-station electric toolpost featuring rigid Hirth coupling indexing

Vertical CNC Lathes VTC Series

Wojie CNC VTC and VTM series vertical lathes are tailored for machining heavy brake discs, rings, hubs and large pipeline flanges. The vertical layout eliminates workpiece deflection caused by gravitational sag. High-capacity table roller bearings ensure heavy load performance.

Vertical spindle orientation eliminates radial cantilever moment on worktable bearings
Worktable chuck diameter and turning swing range from 500 mm to 1250 mm for big rings
Heavy-duty square cross-section ram engineered for deep internal bore boring depths
Integrated automatic tool turret or tool block with continuous metered oil lubrication

Gantry Machining Centers GMC Series

Wojie CNC GMC and LM series gantry milling centers are built for five-sided multi-axis machining of lengthy plates, machine beds and aerospace structural components. The bridge frame and roller guideways deliver X travel up to 4000 mm. The BT50 spindle drives high torque milling.

Wide structural bridge crossbeam design suppresses deflection during heavy cutting passes
Longitudinal X-axis travel span ranges from 1600 mm up to 4000 mm for lengthy workpieces
Heavy BT50 taper spindle configuration coupled with high-reduction geared transmission
High-resolution linear optical glass scales provide closed-loop position monitoring

Spindle Cartridges, Tool Turrets and Ballscrews

Replacement subassemblies for Wojie CNC machines restore kinematic precision during scheduled maintenance. The portfolio covers precision spindle cartridges, preloaded ballscrews, hydraulic chucks, and servo drives. All items are delivered with complete technical documentation.

Angular contact precision spindle bearing sets rated to high accuracy grades P4 and P2
Ground precision ballscrew assemblies equipped with preloaded dual anti-backlash nuts
Hydraulic and servo tool turrets with interchangeable tool disks for VDI and BMT blocks
Labyrinth seal rings, telescopic slideway way covers, and coolant circulation filters

Engineering Support and Technical Consulting for Wojie CNC Machines

SpareX provides engineering consultation, configuration sizing, and integration support for Wojie CNC machine tools.

Our technical specialists conduct a thorough engineering audit of customer production requirements: analyzing kinematic cutting paths, calculating necessary spindle drive torque, and selecting optimal configurations of slant bed lathes and vertical machining centers.

We assist with CNC controller interface coordination, tooling selection, and the preparation of comprehensive technical specifications.

Scheduled Maintenance and High-Wear Component Replacement

Continuous multi-shift machine operations under demanding machining cycles cause operational wear on linear guideways, ballscrew support bearings, way covers, and spindle seals.

The SpareX maintenance support program arranges scheduled deliveries of precision Wojie CNC replacement parts: angular contact spindle bearings rated to accuracy classes P4 and P2, replacement chuck jaws for turning centers, and precision coolant filtration cartridges.

Parameter Setup and Commissioning of CNC Machine Complexes

Commissioning of Wojie CNC precision machines follows a rigorous test protocol. Engineers perform geometric leveling of machine beds, alignment of positioning feedback optical scales, and digital drive synchronization via industrial fieldbuses.

Final commissioning involves testing tool turret indexing cycles, verifying bidirectional repeatability across linear axes, and cutting test specimens according to NAS 979 standards.

Engineering Selection of Replacement Parts by Machine Nameplate

Accurate identification of Wojie CNC spare parts and functional assemblies is conducted using factory nameplates, machine serial numbers, and assembly blueprints.

The portfolio covers high-speed cartridge spindles, hydraulic power chucks, tool turrets for TCK and VTC series lathes, and precision ground ballscrew assemblies with preloaded dual nuts, minimizing unplanned machine downtime.

Workshop Foundation, Environmental and Electrical Requirements

Operating heavy Wojie CNC vertical and gantry machining centers requires adherence to workshop foundation isolation and electrical power quality standards. Machine installation guidelines mandate reinforced concrete foundations with vibration dampening gaps to isolate external plant vibrations.

Grounding loops must maintain resistance below 4 ohms, and line voltage fluctuations must remain within tight tolerances.

Spindle Thermal Drift Control and Lubrication Guidelines

Maintaining dimensional tolerances during extended machining runs requires strict thermal drift management of Wojie CNC spindles. Machine designs feature automated pulsed guideway lubrication and closed-loop oil-air lubrication for high-speed bearings.

Maintenance teams must inspect oil mist delivery pressures, service chiller heat exchangers, and verify compressed air dryness at spindle labyrinth seals.

Wojie CNC and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wojie CNC and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.