Wiscon Envirotech Industrial Waste Processing Equipment

Heavy-duty industrial shredders, granulators, and plastic recycling machinery by Wiscon Envirotech Inc. engineered for polymer and solid waste recovery.

Wiscon P Series Industrial Single-Shaft Shredders

Industrial single-shaft shredders of the P series (models P260, P380, P3120, and P3150) deliver robust size reduction for dense polymers, pipes, and purgings. The heavy rotor features diameters of 250 to 400 mm with an integrated hydraulic ram maintaining continuous positive feed.

Electric motor drive packages rated at 18.5, 37, 55, and 75 kW across models
Independent hydraulic power pack rated from 1.5 to 5.5 kW for continuous pusher feed
Replaceable indexable alloy cutter inserts with heat treatment from 52 to 59 HRC
Interchangeable perforated screens with hole diameters ranging from 20 to 60 mm

Wiscon DS Series Twin-Shaft Industrial Shredders

Twin-shaft industrial shredders of the DS series (models DS260, DS280, DS380, and DS3120) deliver high torque at low rotor speeds of 5 to 14 RPM for bulky containers and drums. Counter-rotating shafts pull tough scrap directly into the cutting zone without material wrapping.

Dual electric powertrain arrangements rated from 5.5+5.5 to 18.5+18.5 kW
Interlocking cutting disc segments with 20 and 40 mm blade thickness profiles
Rotor shaft diameters of 280 and 430 mm carrying 30 to 60 cutting discs
Automatic PLC overload reversal protecting heavy reduction gearboxes from shocks

Wiscon CL Series Heavy-Duty Plastic Granulators

Heavy-duty plastic granulators of the CL series (models CL580, CL5100, CL5120, CL6100, CL6120, CL8120, and CL8160) deliver high-capacity secondary granulation for regrind recovery. Rotors measuring 520, 660, and 800 mm in diameter are driven by main electric motors up to 160 kW.

Main electric drive options rated from 45 up to 160 kW for recycling lines
Stator and rotor knives manufactured from D2 tool steel with micro-gap adjustment
Knife arrangements configured in 5x2, 7x2, and 7x4 arrays for uniform granulates
Wear-treated sizing screens with aperture diameters from 3 to 12 mm

Wiscon CS Series Compact Plastic Crushers

Compact plastic crushers of the CS series (models CS260, CS360, and CS480) are engineered for beside-the-press recycling of sprues, runners, blow molding scrap, and edge trims. The enclosed soundproof hopper and optimized cutter geometry provide quiet plant floor operation.

Soundproofed double-wall feed hopper minimizing ambient noise levels in workshops
Compact frame footprints allowing integration adjacent to injection molding presses
Staggered rotary knife designs providing smooth shear cutting of thin-walled parts
Quick-release screen cradle and tilt-back hopper for fast cleanout during color shifts

Wiscon Replacement Knives, Discs, and Sizing Screens

Precision cutting components by Wiscon Envirotech include indexable square knives rated at 52 to 59 HRC, multi-tooth cutting discs for twin-shaft shredders, and perforated sizing screens with 20 to 60 mm openings. Vacuum-treated alloy steels maintain reliable edge retention.

Four-edge indexable cutter blocks for P series single-shaft shredders at 52 to 59 HRC
Multi-tooth interlocking cutting discs and spacer collars for DS series shredders
Perforated sizing screens with apertures from 20 to 60 mm in A3 and stainless steel
Adjustable stationary bed knives and counter-comb inserts for precise clearance control

Wiscon Hydraulic Power Units, Rams, and Drive Assemblies

Powertrain assemblies across Wiscon Envirotech machinery feature hydraulic pusher power units rated from 1.5 to 5.5 kW, proportional control valves, heavy cylinders, and planetary gearboxes. Components withstand peak torsional surges when processing solid polymer lumps.

Hydraulic ram power packs delivering continuous operating pressures up to 160-210 bar
Proportional direction control valves and hydraulic cylinders with limit stroke sensors
Heavy-duty planetary reduction gearboxes engineered with high torque service factors
Drive V-belts, flexible shaft couplings, and internal wear-resistant chamber liner plates

Industrial shredders and waste processing equipment by Wiscon

Industrial single-shaft shredders P series, twin-shaft shredders DS series, heavy-duty granulators CL series, and compact plastic crushers CS series engineered for polymers, bulky waste, and recycling plants.

Wiscon Envirotech designs robust size reduction machinery equipped with high-torque gearboxes and hydraulic ram units. Engineering teams configure cutting geometries, rotor speeds, and screen apertures to match targeted throughput and bulk density requirements.

Sizing screens and plastic washing systems for recycling

Perforated sizing screens with apertures from 20 to 60 mm in A3 or stainless steel, hydraulic ram feed assemblies, and turnkey plastic film washing lines with friction washers and centrifugal dewatering.

The mechanical wash stage extracts dirt, adhesives, and paper labels through intensive friction without thermal polymer degradation. Subsequent centrifugal dewatering and float-sink separation tanks ensure clean regrind flake preparation.

Cutting tool metallurgy and indexable blade geometry

Cutting tool metallurgy and indexable blade geometry determine shredder throughput stability during abrasive waste processing. Wiscon cutting rotors utilize high-alloy tool steels such as D2 subjected to vacuum heat treatment reaching 52 to 59 HRC.

The square cutting inserts on P series shredders allow multi-edge indexing before replacement, minimizing operating expenditures during continuous processing of dense polymers, pipes, and synthetic fibers.

High-torque hydraulic drive architecture and overload protection

Hydraulic ram powertrains deployed on P series shredders provide steady feed force and instantaneous overload reversal. Driven by variable-displacement hydraulic pumps and high-torque motors, the ram dynamically adjusts feed speeds under heavy resistance.

When uncrushable tramp metal enters the cutting chamber, electrical current sensors trigger automatic shaft reversal, protecting shafts from mechanical deformation.

Quad-shaft shredding technology for uniform size reduction

Four-shaft shredders by Wiscon feature synchronized multi-roll cutting action to achieve uniform particle size reduction in a single pass. Primary shafts execute shear cutting while auxiliary counter-shafts pull bulky containers down against the integrated sizing screen.

The enclosed shredding chamber ensures controlled destruction of confidential archives, electronic scrap, and hazardous drums under strict industrial safety protocols.

Plant integration and international machinery deliveries by SpareX

Engineering selection of industrial shredders requires verifying moisture levels, bulk density, infeed dimensions, and target hourly tonnage. Technical specialists evaluate plant conveyor integration, electrical transformer ratings, and hopper chute dimensions.

Turn-key installations worldwide incorporate magnetic separators, dust suppression hoods, and automated control cabinets to deliver dependable long-term waste recovery.

Wiscon Envirotech and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wiscon Envirotech and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.