Industrial automation and controllers Yaskawa VIPA Controls / VIPA

Engineering selection and sourcing of Yaskawa VIPA Controls and VIPA systems: modular SLIO PLCs, high-speed 300S+ SPEED7 processors, compact MICRO units, and HMI touch panels tailored to factory automation requirements.

VIPA SLIO CPU processor modules for decentralized industrial control

VIPA SLIO processor units combine the functionality of a compact PLC and communication controller on a 48 Mbit/s backplane. Modules deliver high-speed logic execution, direct attachment of slice I/O modules, and flexible parameter setup for PROFINET, EtherCAT, and Modbus networks.

Integrated SPEED7 processing technology with scalable work memory allocation
Dual Ethernet interface ports for programming access and supervisory communication
Direct expansion up to 64 slice modules per rack without backplane speed reduction
Removable VIPA VSC memory card for instant system activation and parameter transfer

VIPA SLIO signal and interface slice modules with permanent wiring

The VIPA SLIO module lineup separates functional electronics from terminal blocks, allowing electronic replacement without disconnecting field wiring on 35 mm DIN rails. The family encompasses digital and analog I/O, counter units, interface couplers, and terminal power modules.

Electronic EM module replacement by pulling from the TM base with wiring left intact
Stepped spring-clamp terminals ensuring solid electrical connection and rapid assembly
Analog channels with adjustable ranges for 4–20 mA current and 0–10 V voltage signals
Clear LED status indicators on each channel for operational diagnostics and bus alerts

High-speed modular VIPA 300S / 300S+ automation control system

VIPA 300S+ industrial controllers powered by the SPEED7 ASIC chip are engineered for demanding automation tasks in production lines. The system is instruction-compatible with Siemens STEP 7 and TIA Portal, supporting up to 32 central modules alongside the high-speed SPEED-Bus.

Ultrafast SPEED7 ASIC processor core delivering minimal instruction cycle times
Hardware mechanical compatibility with standard industrial racks matching S7-300 lines
Work memory expansion on the controller without CPU hardware swap using VIPA MCC cards
Communication channels including MPI, PROFIBUS-DP master/slave, and integrated Ethernet

Compact programmable VIPA MICRO PLC micro-controllers

VIPA MICRO micro-controllers under 72 mm in width combine a SPEED7 processing engine and high I/O channel density in a single housing. The lineup succeeds the legacy System 100V family, offering an up-to-date layout with detachable terminals and an integrated two-port Ethernet switch.

Ultra-compact enclosure geometry saving up to 50% cabinet space compared to brick units
Integrated digital and analog I/O channels allowing direct wiring to sensors and coils
Built-in two-port Ethernet switch enabling linear line and ring fieldbus layouts
Detachable Push-in spring terminal strips for convenient bench wiring and quick setup

Industrial operator touch panels and VIPA HMI visualization units

VIPA operator panels cover Professional Panels, smartPanels, and cloudPanels across screen sizes from 4.3 to 12 inches. The units provide process visualization, alarm logging, and recipe handling using Movicon 11 and integrated WebVisu engineering suites.

Cast aluminum front bezel rated IP65 engineered for demanding plant conditions
Movicon 11 Standard visualization software with adaptable mimics and trend screens
Integrated HTML5 and WebVisu runtime in cloudPanels for browser-based remote monitoring
Interfaces including Ethernet, RS232/485, and USB ports for PLC and peripheral links

VIPA network interface modules and industrial switches

VIPA networking hardware ensures dependable data transmission across automation tiers over PROFINET, PROFIBUS, EtherCAT, and CANopen protocols. The family features PN8-RD managed switches, bus connectors, line repeaters, and shielded interface cabling.

Industrial 8-port managed switch VIPA 911-2PN80 optimized for PROFINET backbones
PROFIBUS cable connectors with built-in switchable termination resistors and test ports
Optical and galvanic signal repeaters designed to extend industrial segment distances
Shielded Industrial Ethernet cables offering immunity against electromagnetic noise

VIPA engineering heritage in Germany and integration with Yaskawa

German automation company VIPA GmbH was established in 1985 by Wolfgang Seel in Herzogenaurach. The enterprise initially specialized in developing performance-enhancing modules for industrial controllers.

The corporate engineering roadmap centered on delivering compatible yet substantially faster hardware solutions for factory automation systems.

Over subsequent decades, the company introduced proprietary modular PLC lines, and in 2012 formally joined the global Yaskawa corporation, establishing the foundation of VIPA Controls division.

Bavarian manufacturing sites continue producing high-speed controllers and distributed I/O modules exported to global manufacturing hubs.

SPEED7 ASIC microprocessor architecture and S7 engineering compatibility

A defining milestone for VIPA was the creation of the proprietary SPEED7 ASIC processor, engineered for high-speed hardware processing of logic routines and floating-point math.

VIPA 300S+ controllers achieve rapid program cycle times, offering superior execution speeds for demanding motion and multi-axis control applications.

The architecture maintains instruction compatibility with Siemens STEP 7, TIA Portal, and WinPLC7 software platforms, enabling production plants to modernize computing racks without rewriting application code.

Onboard MPI, PROFIBUS-DP, and Ethernet PG/OP communication ports facilitate straightforward integration into plant networks.

VIPA SLIO modular slice architecture and permanent terminal wiring

The VIPA SLIO remote I/O platform was engineered to construct space-saving and adaptable data acquisition stations across automation cells.

The mechanical layout employs a split architecture separating functional electronic modules (EM) from terminal base modules (TM) installed along 35 mm DIN rails. Service replacements require swapping only the electronic block.

Field signal lines connected into stepped spring-clamp terminals remain firmly attached to the rail mounting, preventing wiring mistakes and shortening equipment downtime.

A fast 48 Mbit/s backplane bus guarantees tight signal synchronization, while interface couplers support PROFINET, EtherCAT, Modbus TCP, and CANopen protocols.

Compact VIPA MICRO PLC controllers for decentralized automation cabinets

For standalone machines and electrical enclosures with tight spatial constraints, VIPA designed the MICRO PLC series.

Featuring a housing width under 72 mm, this monoblock controller combines a SPEED7 processing core, onboard digital and analog I/O channels, and a dual-port Industrial Ethernet switch.

This layout frees up to 50% mounting space compared to conventional brick controllers.

Detachable Push-in spring terminal blocks streamline preliminary harness wiring during cabinet assembly, while an embedded web server and open fieldbus protocols ensure rapid commissioning into shop-floor supervisory networks.

VIPA HMI operator interfaces and PROFINET communication infrastructure

Human-machine interfaces across VIPA systems encompass Professional Panels, smartPanels, and cloudPanels.

Professional series units are housed in rugged aluminum alloy enclosures with IP65 front ingress rating, shielding the display and internal electronics against industrial dust, oils, and moisture across operating temperatures from 0 to 50 °C.

The preinstalled Movicon 11 Standard visualization engine provides operators with clear mimic diagrams, real-time trends, and recipe databases.

For data routing between automation nodes, VIPA 911-2PN80 managed switches deliver RJ45 connectivity and PROFINET protocol conformance with hardware traffic prioritization.

Engineering diagnostics, parameter tuning, and commissioning for Yaskawa VIPA

Technical specialists deliver comprehensive diagnostics and engineering support for Yaskawa VIPA Controls hardware deployed across industrial automation installations.

Engineers execute hardware diagnostics on I/O racks, verify signal integrity on 4–20 mA and 0–10 V analog loops, and troubleshoot fieldbus communication on PROFIBUS and PROFINET.

Under formal service agreements, teams carry out controller parameter setup, analog loop calibration, replacement of worn power modules, and complete commissioning within plant control cabinets.

Scope of work, technical schedules, and component deliveries with 22% VAT are documented through formal contracting.

Yaskawa VIPA Controls / VIPA and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Yaskawa VIPA Controls / VIPA and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.