Yangzhou JBM Vibration / JBM Industrial Vibratory Motors

Three-phase asynchronous vibratory motors, flange-mounted drives, and eccentric counterweights Yangzhou JBM Vibration (JBM): engineering selection for screening equipment.

YZU Series Type A foot-mounted three-phase vibratory motors

Horizontal three-phase vibratory motors Yangzhou JBM Vibration (JBM) YZU Series Type A are built for linear vibrating screens, conveyors, and feeders. Heavy-duty mounting feet ensure firm structural connection to machine frames and smooth transfer of dynamic excitation loads.

Rated electrical drive motor output ratings spanning from 0.12 kW up to 11 kW
Synchronous stator operating speeds for 50 Hz networks at 1000, 1500, and 3000 rpm
Stepped adjustment of eccentric counterweights to tune centrifugal excitation
Rigid motor frame housing with reinforced cooling ribs for stable heat removal

Heavy-duty industrial vibratory motors YZU Series Type B

Heavy-duty vibratory motors Yangzhou JBM Vibration (JBM) YZU Series Type B are engineered for heavy sizing screens in mining and metallurgy. Enlarged bearing assemblies and an alloy steel shaft withstand intense reversing dynamic forces during continuous mineral ore sorting.

Heavy-duty spherical roller bearings engineered specifically for vibratory duty
Extended centrifugal force capacity to screen heavy abrasive mineral fractions
High-temperature synthetic grease filling with extended regreasing intervals
Formed steel counterweight end covers with continuous elastomeric ring seals

Side-plate flange-mounted vibratory motors YZU Series Type C

Vibratory drive motors Yangzhou JBM Vibration (JBM) YZU Series Type C incorporate a lateral flange for direct attachment onto vibrating machine side walls. This compact setup eliminates cantilever brackets, directing dynamic thrust straight into the material processing trough.

Side-plate mounting flange providing direct connection to screen body walls
Lower overall equipment height optimizing feeder and conveyor installation
Uniform peripheral distribution of dynamic excitation moments along flanges
Precision machined joint faces preventing loosening under sustained shaking

High-thrust industrial vibratory drives YZU Series Type E

High-thrust vibratory drive motors Yangzhou JBM Vibration (JBM) YZU Series Type E are built for heavy vibratory conveyors and silo activators. Elevated starting torque and thermal stator winding insulation of class F/H provide reliable drive performance in hot foundries.

Enhanced excitation thrust overcoming dense bulk material vaulting in hoppers
Vibration-resistant stator winding impregnation using class H thermoset resin
High-strength ductile iron motor housing resistant to cyclic fatigue failure
Rugged terminal enclosure featuring vibration-damped cable entry seals IP66

Vertical flange-mounted vibratory motors YZU Series Type L

Vertical vibratory motors Yangzhou JBM Vibration (JBM) YZU Series Type L are tailored for circular vibrating screens, liquid separators, and vibratory finishers. Separated upper and lower counterweights generate adjustable spatial three-dimensional elliptical oscillating trajectories.

Vertical circular mounting flange tailored for central screen compartment fitting
Independent angular phase shift adjustment between upper and lower weights
Generation of tailored spatial trajectories for precise powder sizing screens
Integrated internal thrust bearing arrangement supporting vertical rotor weight

Dust explosion-proof vibratory drive motors YZUB Series

Dust ignition-protected vibratory motors Yangzhou JBM Vibration (JBM) YZUB Series are engineered for hazardous combustible dust atmospheres in grain elevators, flour mills, coal handling, and chemical plants. The sealed enclosure prevents ingress of combustible airborne dust particles.

Explosion protection engineering suitable for combustible dust environments
Labyrinth and contact shaft seals achieving ingress protection class IP65/IP66
Integrated PTC thermistors for continuous winding and bearing thermal monitoring
Heavy-walled sealed enclosure withstanding external mechanical impact shocks

Electromechanical design and counterweight adjustment of YZU motors

Three-phase asynchronous vibratory drive motors Yangzhou JBM Vibration (JBM) YZU Series convert electrical energy into directional mechanical oscillating thrust by rotating adjustable eccentric counterweights mounted on both ends of the rotor shaft.

The centrifugal excitation force is tuned by altering the angular displacement between adjustable outer weights and fixed inner weights across an indexed circular dial.

When counterweight pairs are aligned in identical phase angles, the drive motor produces peak centrifugal excitation thrust required for heavy sizing screens and bulk material feeders.

Adjusting the angular offset decreases vibrational amplitude, moderating dynamic loads transferred into supporting machine frames and preventing structural metal fatigue during fine powder sorting operations.

Heavy-duty bearing assemblies and lubrication practices in JBM drives

Severe cyclical reversing dynamic loads demand heavy-duty spherical roller bearings engineered specifically for vibratory duties inside Yangzhou JBM Vibration drive motors.

An enlarged internal radial clearance C4 compensates for rotor shaft thermal expansion caused by continuous operation in hot industrial workshops. Precision bearing assemblies utilize massive machined brass cages that absorb shock loads without cracking.

Lubrication is maintained through high-temperature synthetic grease fortified with extreme-pressure anti-wear additives applied via grease nipples on motor end shields.

Regular replenishment at scheduled operating intervals prevents bearing raceway overheating, ensuring durable service life under sustained shaking.

Side-plate flange mounting engineering for YZU Type C vibratory motors

Vibratory motors Yangzhou JBM Vibration (JBM) Type C are mounted directly onto the structural side walls of vibrating screen boxes via a rigid lateral Side-Plate flange.

This arrangement eliminates external support beams and cantilever brackets, reducing total machine weight and simplifying layout within compact plant footprints.

When tightening high-tensile flange mounting bolts, torque verification with calibrated torque wrenches and the use of locking fasteners are mandatory.

Direct planar surface contact between machined joint faces distributes dynamic excitation moments smoothly across the side plate, preventing localized stress concentrations and sheet fatigue cracking.

Vertical vibratory motor dynamics for circular sizing separators

Vertical flange-mounted vibratory motors Yangzhou JBM Vibration (JBM) YZU Series Type L are specifically developed for circular sizing separators, scalpers, and vibratory finishing drums.

Separated upper and lower eccentric counterweights generate spatial three-dimensional elliptical wave motions across screen meshes.

Adjusting the spatial phase lead angle of the lower counterweight relative to the upper weight permits precise tuning of radial material travel speed from screen center to discharge periphery.

This tailored three-dimensional kinematic motion prevents wet fine particles from blinding screen openings, maximizing throughput per unit mesh area and providing steady self-cleaning action.

Construction of dust explosion-proof vibratory motors YZUB Series

For manufacturing plants handling combustible airborne powders, the joint venture Yangzhou JBM Vibration produces the YZUB explosion-proof vibratory motor series.

The heavy motor housing is formed from ductile alloy iron with external cooling fins and is sealed by elastomeric O-rings along all joint faces and counterweight covers.

Precision labyrinth shaft seals prevent combustible flour, coal dust, or chemical particulate matter from entering bearing chambers.

Stator windings are impregnated with high-strength thermoset resin, while embedded PTC thermal sensors continuously monitor internal temperatures, safeguarding against electrical faults and sudden downtime.

Dual motor self-synchronization on linear screens and feeders

On horizontal and inclined linear vibrating screens, conveyors, and heavy reclaim feeders, a dual-drive configuration with Yangzhou JBM Vibration (JBM) motors is frequently applied.

When two counter-rotating vibratory drive motors operate in parallel on a shared floating frame, dynamic self-synchronization occurs automatically.

Transverse centrifugal force vectors cancel each other out continuously, while longitudinal force vectors combine to produce straight-line oscillating thrust for the material trough.

Maintaining identical static moments on both counterweight sets ensures stable bulk material conveyance under optimal discharge angles without irregular rocking motions.

Yangzhou JBM Vibration / JBM and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Yangzhou JBM Vibration / JBM and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.