Equipment and components Mesan Locks / Mesan Kilit

Quarter turn locks Mesan Locks / Mesan Kilit 060 and 066 specification

Quarter turn locks produced by Mesan Locks / Mesan Kilit across 060, 063, 066, and 073 series provide compact latching for electrical cabinets. When sizing hardware, the critical dimension is grip depth (GH dimension), determining clearance between outer door skin and frame strike surface.

Mesan manufactures straight and offset cam arms with offsets from -4 mm up to +45 mm, accommodating grip depths between 14 mm and 50 mm. Lock housings are molded from Zamak zinc alloy with black powder or chrome plating. For harsh settings, AISI 304 and 316 stainless variants are available.

An integrated sealing ring maintains enclosure protection to IP65 standards.

Design principles of Mesan Locks / Mesan Kilit 001 and 201 swinghandles

Recessed swinghandles manufactured by Mesan Locks / Mesan Kilit across 001, 101, 201, and 501 families operate network server racks and automation consoles.

The mechanical layout provides flush seating of the lever within the bezel when locked, shielding the mechanism against accidental snagging and tampering.

To unlock, the handle tilts outward upon push button actuation or key turn, allowing smooth lever rotation to disengage the latch or drive link rods. The core accepts standard European DIN profile half-cylinders measuring 40 mm and 45 mm in length.

Housing parts are molded from high-strength polyamide PA6 with 30% glass reinforcement to resist mechanical impacts.

Multipoint rod latching systems Mesan Locks / Mesan Kilit 002 and 502

Multipoint rod latching solutions by Mesan Locks / Mesan Kilit powered by 002, 102, 409, and 502 gear boxes are designed for tall industrial electrical enclosures measuring between 1600 mm and 2200 mm in height.

On tall doors, a single center latch cannot provide uniform perimeter pressure, leading to gasket gaps. The gear drive converts rotary motion from the swinghandle into synchronized linear travel of upper and lower rods.

Depending on frame geometry, round steel rods IC with 8 mm diameter and roller shoes or flat punched rods IL are utilized. Low-friction polyamide rod guide brackets eliminate play and operational noise along the cabinet frame.

Industrial hinge selection Mesan Locks / Mesan Kilit 094 and 194 lines

Industrial enclosure hinges from Mesan Locks / Mesan Kilit across 090, 094, 099, 194, and 294 lines are divided into surface mount, concealed pivot, and corner brackets.

Surface leaf hinges 099 and 199 mount directly onto external frame and door faces using countersunk screws, granting door clearance up to 180 degrees for unobstructed access to internal equipment.

Concealed internal hinges 094 and 194 fit inside the door return flange, concealing mechanical fasteners from the outside. For heavy power substation doors, hinges fabricated from extruded aluminum or high-grade Zamak zinc alloy support door weights up to eighty kilograms per pair.

Sealing profiles and self-adhesive gaskets Mesan Locks / Mesan Kilit 340.09

Sealing profiles from Mesan Locks / Mesan Kilit across 340.09, 1100, 1200, and 1300 designs provide environmental protection between doors and cabinet frames.

Composite 340.09 edge trims comprise a resilient microcellular EPDM sponge bulb co-extruded onto a U-shaped grip channel reinforced with an internal spring steel carrier. The clamping flange grips sheet metal edges from 1 mm to 4 mm thickness without adhesives or assembly tools.

EPDM rubber exhibits outstanding resistance against outdoor ozone, ultraviolet exposure, and retains elastic memory from -40 C to +120 C. Self-adhesive microcellular strips 1100 suit flat enclosure mating flanges.

Stainless steel hardware and electronic access systems Mesan Locks / Mesan Kilit

For chemical processing facilities, food production lines, and outdoor marine enclosures, Mesan Locks / Mesan Kilit manufactures access hardware from AISI 304 and AISI 316 stainless steel.

Latch models 064, 401 and multi-point bars 103 resist corrosive washdown detergents, acid vapors, and saline spray environments.

For mission-critical server rooms, the manufacturer developed ELS 3114 mechatronic handles equipped with motorized actuation, RFID proximity card readers, and LED status indicators.

Centralized ACU 3402 and ACU 3403 controllers link cabinet locks into facility security networks, logging door activity and enabling two-factor authorization.