WINON / Ronglong Industrial Printing Equipment and Tooling

Industrial marking machinery, semi-automatic pad and screen printing systems, silicone transfer pads, and sealed ink cups WINON / Ronglong: engineering selection.

WINON / Ronglong WN and WNS series pad printing machines

Industrial pad printing systems WINON (Ronglong) including series WN-121, WN-122, and full-servo WNS-250EC units provide high-precision single and multi-color decoration on electronic enclosures, automotive interior trim components, glass containers, and medical equipment.

Pneumatic and servo driven pad motion offering continuous stroke regulation and smooth damping
Open ink tray setups and sealed ink cup assemblies accommodating diameters up to 120 mm
Precision coordinate work table featuring fine micrometer adjustment across X, Y, and Z axes
Digital programmable logic controller with clear operator terminal for cycle management

WINON / Ronglong WSC series industrial screen printing machines

Semi-automatic screen printing equipment WSC series (WSC-160, WSC-260, WSC-350, WSC-600BD, WSC-700BE, WSC-1000BE) delivers uniform ink deposition on sheet plastics, membrane switches, display glass panels, and cylindrical industrial containers.

Vertical screen frame lift mechanism eliminating image smearing during stroke return
Pneumatic squeegee and flood coater drive with independent working pressure regulators
Heavy-duty vacuum print table providing stable suction clamping for flexible materials
Rotary printing attachment support for 360-degree cylindrical application on bottles

WINON / Ronglong WFH hot stamping and thermal transfer machinery

WINON (Ronglong) hot stamping and heat transfer equipment across series WFH (WFH-120BP, WFH-150, WFH-180H, WFH-300) delivers metallic foil decoration, holographic labels, and thermal transfer patterns onto plastic caps, cosmetic bottles, and extruded trims.

Microprocessor temperature controllers maintaining hot platen stability up to 300 C
Motorized foil feeder unit with programmable stepping length preventing foil waste
Pneumatic stamping force up to two metric tons producing crisp impression borders
Modular mounting fixtures accommodating flat stamping dies and heated silicone rollers

WINON / Ronglong WUV UV curing conveyors and WIR infrared dryers

WINON (Ronglong) auxiliary machinery covers conveyorized ultraviolet dryers WUV-800, infrared tunnel curing systems WIR-600, gas flame surface treaters WFT-25, and exposure units WSS-400 for thorough ink polymerisation and pre-press cliché manufacturing.

High-output UV emitter lamps with focused aluminum reflectors and dual power step control
Teflon-mesh heat resistant conveyor belt driven by electronic variable speed motor
Infrared heating elements paired with turbulent hot air circulation for drying cycles
Gas flame surface treatment torches boosting surface energy on polyolefin substrates

WINON / Ronglong WP series silicone printing pads and transfer tooling

WINON WP series silicone printing pads (including WP-010, WP-011, WP-012, WP-014, WP-015, WP-017, WP-018, WP-050) are molded from high-purity organosilicon compounds to deliver repeatable ink pickup and complete release onto textured components.

Extensive geometry portfolio encompassing round, rectangular, compound wedge, and bar shapes
Accurate Shore A hardness gradation spanning two to eighteen degrees for diverse parts
High mechanical resilience and chemical tolerance against harsh printing solvent blends
Tuned surface energy promoting sharp dot formation and minimal ink residue retention

WINON / Ronglong sealed ink cups, doctor rings and steel cliché plates

WINON (Ronglong) precision tooling includes sealed ink cups, zirconium ceramic and tungsten carbide doctor rings, hardened tool steel cliché plates, and magnetic docking adapters that eliminate solvent evaporation and stabilize ink viscosity.

Zirconia ceramic wiper rings with double-sided micro-lapped cutting edge geometry
Tungsten carbide doctor rings designed for extended high-volume runs on thick steel plates
Hardened alloy steel clichés heat treated to 62-64 HRC with sub-micron surface flatness
Balanced magnetic and mechanical hold-down cup assemblies for uniform plate contact

Motion kinetics and ink delivery alignment in WINON / Ronglong WN pad printers

Semi-automatic pad printing machinery from WINON (Ronglong) across series WN-121 and WN-122 utilizes linear pneumatic cylinders and electronic servo drives that deliver smooth pad stroke articulation with end-position damping.

Ink film thickness depends on precision clearance adjustment between the cliché plate and the doctor ring of the sealed cup assembly. For open inkwell setups, technician focus centers on doctor blade attack angles (typically 65 to 70 degrees) and uniform spring tension across the stroke carriage.

On full servo WNS-250EC units, independently programmable pickup and deposit velocities eliminate ink misting at elevated cycling rates.

Precision drive kinematics and vacuum hold-down in WSC screen printers

WINON (Ronglong) screen printing systems series WSC (WSC-600, WSC-700, WSC-1000) are engineered for repeatable application of conductive pastes, graphic inks, and protective clear coats onto industrial panels and cylindrical vessels.

Rigid steel structural frame weldments attenuate vibration during high-speed squeegee sweeps. The vertical screen peel-off drive ensures clean separation of the mesh fabric from wet ink deposits, preventing blurry edges on fine lettering.

Sectional vacuum print beds clamp thin polymer foils without surface deformation, while micrometer alignment spindles enable registration adjustments within 0.02 mm.

Thermal dynamics and pressure control in WFH hot foil stamping presses

Hot foil stamping and heat transfer presses WINON series WFH (WFH-120BP, WFH-150, WFH-180H, WFH-300) demand synchronized control over platen temperature, mechanical dwell time, and impression thrust.

When applying metallic or pigment foils onto rigid thermoplastics (ABS, polystyrene, polypropylene), heated platen temperatures are maintained by digital PID modules between 110 and 160 degrees Celsius.

An automated stepping foil feeder with photoelectric sensor synchronization minimizes foil consumption. Stamping tonnage is governed by pneumatic line pressure regulators and mechanical toggle stops, safeguarding fragile parts.

UV curing technology on WUV units and WIR infrared tunnel systems

Post-print curing equipment from WINON includes conveyorized ultraviolet dryers WUV-800 and infrared tunnel ovens WIR-600. The WUV-800 ultraviolet unit incorporates medium-pressure mercury lamps peaking at 365 nm, achieving rapid resin crosslinking within fractions of a second.

Elliptical aluminum reflectors focus radiation into an intense band, minimizing heat exposure on sensitive polymer parts.

In WIR-600 infrared tunnels, medium-wave quartz emitters work in tandem with recirculating hot air to evaporate heavy solvents from thick screen print films, securing optimal bonding strength and abrasion durability.

Geometry selection and Shore A hardness for WINON WP silicone printing pads

Specialized silicone transfer pads from WINON series WP (WP-010, WP-011, WP-012, WP-050) are vulcanized from high-purity organosilicon polymers that preserve elasticity under continuous dynamic loading.

Pad geometry must correspond to component contours: pointed and roof-shaped pads achieve progressive rolling contact that expels trapped air bubbles, whereas flat rectangular designs suit broad uniform graphics.

Hardness ratings span Shore A 2 to 6 degrees for thin-walled plastic bottles up to 12 to 18 degrees for textured electronic instrument panels requiring firm contact pressure to fill fine surface pores.

Maintenance of sealed ink cups, doctor rings and hardened steel clichés

The sealed ink cup system developed by WINON limits volatile solvent emissions and maintains steady ink rheology throughout long shifts. The core sealing component is an engineered doctor ring fabricated from zirconia ceramic or tungsten carbide seated inside an anodized aluminum cup.

The ceramic wiper ring features a mirror-lapped cutting bevel that scrapes the steel cliché without streak formation or scratching.

Thick steel clichés heat treated to 62-64 HRC deliver extensive impression lifespans when cleaned using approved mild solvents and loaded with balanced magnetic downward force.

WINON / Ronglong and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WINON / Ronglong and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.