Breitländer GmbH / Breitländer analytical equipment and calibration materials

Breitländer GmbH / Breitländer product portfolio: laboratory pellet presses, vibratory disc mills, SUS calibration standards, and XRF consumables.

Breitländer GmbH / Breitländer hydraulic laboratory pellet presses

Automatic and manual hydraulic presses from Breitländer GmbH / Breitländer deliver compaction forces from 100 to 400 kN for pelletizing fine powders of cement, slag, and ores. The units provide regulated pressure ramp-up and dwell stages to produce stable pellets for XRF.

Hydraulic ram pressing capacity adjustable from one hundred to four hundred kilonewtons
Digital programming of pressure build-up rates, holding duration, and smooth release cycles
Modular tooling receiver accepting tungsten carbide dies in 32 mm, 35 mm, and 40 mm sizes
Integrated transparent safety enclosure with automatic electrical interlock switches

Breitländer GmbH / Breitländer vibratory disc and cup mills

Vibratory disc and cup pulverizing mills from Breitländer GmbH / Breitländer perform rapid fine grinding of brittle and hard analytical samples down to fineness below 63 microns. The units prepare metallurgical slags, ferroalloys, and ores for spectrometer loading.

Drive eccentric vibration speeds reaching up to 1500 revolutions per minute
Grinding cup sets with functional batch capacities from 50 to 250 millilitres
Material grades for milling vessels: hardened tool steel, tungsten carbide, and zirconia
Rapid eccentric clamping lever mechanism ensuring secure locking of the grinding bowl

Breitländer GmbH / Breitländer fusion machines and fluxers for XRF

Automatic bead fusion fluxers from Breitländer GmbH / Breitländer convert pulverized mineral and ore samples into homogeneous glass discs via borate flux fusion at temperatures up to 1200 °C. The bead preparation eliminates grain-size matrix interferences in XRF.

Maximum operating thermal limit in heating furnace reaching twelve hundred degrees Celsius
Crucibles and casting dishes fabricated from platinum-gold alloy Pt-Au 95/5 formulation
Dynamic tilting and rocking mechanisms ensuring thorough homogenization of liquid bead
Automated pouring cycle delivering molten flux into preheated casting moulds

Breitländer GmbH / Breitländer SUS setting-up and drift calibration standards

Setting-up samples (SUS) from Breitländer GmbH / Breitländer are manufactured from alloyed steels, cast irons, and non-ferrous metals with verified volume homogeneity. They serve for daily instrument drift correction and curve recalibration on spark-OES spectrometers.

Exceptional volumetric homogeneity of constituent chemical elements across burning surface
Matrix bases covering iron, nickel, aluminium, copper, titanium, and cobalt metal families
Disc sample dimensions spanning 35 mm to 42 mm diameters with thickness above 20 mm
Analytical documentation with reference intensity channels for spectrometer recalibration

Breitländer GmbH / Breitländer analytical reference materials for metals and alloys

Analytical reference materials (CRMs) from Breitländer GmbH / Breitländer across iron and steel companion series provide verified mass fractions of carbon, silicon, manganese, chromium, nickel, and molybdenum. The chilled discs enable spectrometer calibration and QA/QC.

Attested elemental concentrations accompanied by declared statistical uncertainty intervals
Chilled white iron discs featuring fine-grained homogeneous carbide matrices
Standards for alloyed tool steels, austenitic and martensitic stainless grades, and superalloys
Comprehensive analytical certificates conforming to international ISO 17034 criteria

Breitländer GmbH / Breitländer XRF sample cups, dies, and fusion fluxes

Analytical consumables from Breitländer GmbH / Breitländer comprise aluminium pellet pressing cups, thin Mylar and polypropylene carrier films, liquid cells, and binders. For fusion sample preparation, high-purity SPECTROFLUX lithium borate flux mixtures are provided.

Aluminium support cups in 32 mm, 35 mm, and 40 mm outer diameters with ribbed rims
Pressing binding additives formulated from microcrystalline paraffin wax and cellulose matrix
Spectroscopic grade SPECTROFLUX fluxes composed of lithium tetraborate and metaborate
Liquid specimen XRF sample cells featuring double-seal rings for leak-tight film retention

Breitländer GmbH / Breitländer analytical specialization and laboratory heritage

German analytical engineering specialist Breitländer was founded in 1972 by Rolf Breitländer in Hamm and subsequently established operations in Wesel.

Over more than thirty-five years the enterprise gained international standing as a developer and supplier of analytical reference materials, calibration standards, and mechanical sample preparation equipment for industrial routine analysis.

Following acquisition and merger into LGC Standards GmbH in Wesel under commercial register HRB 21278, the enterprise integrated into a comprehensive global metrological network.

The specialized product portfolio of setting-up samples (SUS), laboratory presses, vibration pulverizers, and analytical consumables continues to support metallurgical and geological testing laboratories worldwide.

Hydraulic pellet presses and vibratory disc mills for XRF sample preparation

To prepare homogeneous specimens for X-ray fluorescence analysis, Breitländer GmbH / Breitländer engineered high-load hydraulic presses delivering compaction forces between 100 and 400 kN.

Regulated pressure rise profiles, programmable dwell intervals, and smooth decompression stages prevent delamination when pressing powdered cement, mining ores, and metallurgical slags.

Vibratory disc pulverizers from Breitländer deliver ultra-fine grinding of hard, brittle mineral specimens down to analytical fineness below 63 microns.

Heavy-duty milling sets manufactured from hardened tool steel, tungsten carbide, and zirconium oxide eliminate cross-contamination and guarantee rapid throughput in demanding multi-shift laboratory operations.

Setting-up recalibration standards SUS and reference materials

Setting-up samples (SUS) engineered by Breitländer GmbH / Breitländer serve for periodic instrument drift correction and analytical calibration curve verification on spark optical emission spectrometers (OES).

Cast discs on iron, cast iron, aluminium, copper, and nickel bases exhibit verified spatial microstructural homogeneity across their burning surfaces.

Standard reference materials across chilled iron series and companion lines are delivered with traceable analytical certificates detailing attested mass fractions of carbon, silicon, manganese, chromium, nickel, molybdenum, sulphur, phosphorus, and trace impurities with declared expanded measurement uncertainty limits.

Analytical consumables, SPECTROFLUX fluxes, and fusion equipment

For spectrochemical laboratory installations, Breitländer GmbH / Breitländer supplies comprehensive analytical accessories including thin-walled aluminium pelletizing cups in 32 mm, 35 mm, and 40 mm outer diameters, ultra-thin Mylar and polypropylene carrier films, and double-seal liquid specimen cells.

When producing homogeneous glass discs via high-temperature fusion, spectroscopic grade SPECTROFLUX fluxes based on pre-fused lithium tetraborate and metaborate eutectic mixtures ensure complete oxide dissolution, eliminating mineralogical and grain-size matrix interferences during X-ray fluorescence analysis.

Breitländer GmbH / Breitländer and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Breitländer GmbH / Breitländer and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.