TELFORD / Telford CNC Turning Lathes and Machining Centers

Precision slant bed turning centers and multi-axis machining centers from TELFORD / Telford CNC deliver dependable metal-cutting productivity for shafts, flanges, and prismatic parts.

Slant bed CNC turning centers TELFORD FCL-580 (Telford CNC)

Turning centers TELFORD / Telford CNC FCL-580 series are built on a rigid slant bed structure with 45-degree inclination. The Meehanite iron bed attenuates vibrations during heavy turning, while the 10-inch hydraulic chuck and A2-8 spindle deliver high accuracy for shaft machining.

Rigid 45-degree slant bed design engineered for efficient chip disposal and stability
Spindle assembly with A2-8 nose configuration and high-precision angular contact bearings
Twelve-station hydraulic indexing turret providing rapid tool selection and clamping force
Seamless integration with industrial Fanuc and Siemens digital numerical control systems

Heavy-duty CNC lathes TELFORD FCL-3150 and FBL-800 (Telford CNC)

Heavy industrial CNC lathes TELFORD / Telford CNC FCL-3150 and FBL-800 models process large-diameter shafts and industrial pipe workpieces. Reinforced frame geometry with hardened box guideways ensures continuous turning stability for workpieces up to 700 mm in swing and 1600 mm in turning length.

Machining envelope handling workpiece diameters up to 700 mm and lengths to 1600 mm
Heavy-duty 15/18.5 kW main spindle motor delivering elevated torque at lower velocities
Hardened ground box guideways with Turcite-B low-friction lining eliminating stick-slip
Programmable hydraulic tailstock equipped with hardened quill for workpiece support

Multi-axis turn-mill machining centers TELFORD FCL-280MY (Telford CNC)

Multi-axis turn-mill centers TELFORD / Telford CNC FCL-280MY and FCL-310MY integrate an orthogonal Y-axis and BMT rotary live tooling. The configuration integrates turning, thread generation, keyway milling, and off-center drilling within one single clamping setup to eliminate part transfer errors.

Interpolated Y-axis motion enabling complex radial and axial contour milling routines
Heavy indexing turret matching rigid BMT radial and axial driven tool holders
High-resolution C-axis spindle contouring with angular feedback precision to 0.001 deg
Single-setup workflow minimizing cycle duration and eliminating relocation discrepancies

High-speed precision CNC lathes TELFORD FCL-160A (Telford CNC)

Compact precision CNC lathes TELFORD / Telford CNC FCL-160A and FCL-280S are built for rapid machining of miniature precision components. Linear gang-tool tooling plates deliver instantaneous tool transition without rotation dwell times, maximizing throughput in electronic hardware.

Linear gang tooling arrangement for immediate tool change without indexing delay
High-velocity cartridge spindle assembly delivering dynamic balance up to 5000 RPM
Precision linear motion roller guideways along X and Z axes ensuring smooth feed
Compact machine footprint engineered for efficient plant shop-floor arrangement

Machining centers TELFORD TCM-855 and MCH-630 series (Telford CNC)

Machining centers TELFORD / Telford CNC TCM-855, TCM-1160, and MCH-630 models are engineered for milling dies, prismatic housings, and automotive components. Direct-drive high-speed spindles and wide linear guideways deliver superior dimensional repeatability and surface finish quality.

Direct-coupled high-velocity BT40 spindle assembly rotating up to 10000-12000 RPM
Twin-arm automatic tool changer magazine with 24-pocket storage capacity
Heavy-duty roller linear motion guideways providing balanced load distribution
High-volume chip flushing wash system and through-spindle high-pressure coolant

Spindle components, tool turrets and machine parts TELFORD (Telford CNC)

For metal-cutting machine tools TELFORD / Telford CNC, a technical selection of replacement units and mechanical assemblies is maintained. The range covers precision spindle bearings, hydraulic chucks, servo indexing turrets, digital encoders, linear scales, and high-pressure flood coolant pumps.

Spindle bearing arrangements rated to ISO P4 tolerance with factory preloading
Hollow and solid hydraulic rotating cylinders paired with power clamping chucks
Ground precision ball screw mechanisms manufactured to C3 accuracy standards
Stainless telescopic slide covers, wiper seals, and hydraulic filtration cartridges

Structural rigidity and dynamic damping of TELFORD FCL slant bed turning machines

Slant bed turning centers TELFORD / Telford CNC FCL series are built upon a monolithic 45-degree slant bed structure poured from high-strength Meehanite iron alloy.

The angled geometry guides hot metal chips downward under gravity directly into the chip conveyor system, avoiding heat accumulation near precision guideway blocks.

The triangular bed cross-section reinforced by massive diagonal ribbing attenuates bending and torsional vibrations during aggressive rough turning operations.

Thorough thermal stabilization of the iron structure prior to guideway grinding eliminates residual stress, ensuring long-term geometric precision across turning center operations.

Spindle kinematics, hydraulic chuck integration and heavy shaft turning parameters

Headstock assemblies in TELFORD / Telford CNC FCL-3150 and FCL-580 lathes integrate precision angular contact ball bearings and roller supports built to ISO P4 tolerance grades. The spindle nose conforming to ASA A2-8 or A2-6 accommodates three-jaw hydraulic power chucks spanning 8 to 12 inches.

Workpiece clamping is actuated by a high-velocity rotating hydraulic cylinder equipped with stroke monitoring sensors.

The main drive motor with wide torque modulation provides continuous power at low rotational velocities for heavy turning of alloy steel forgings, while accelerating up to 3500-4500 RPM for fine finishing of shaft journals with smooth surface finish.

Multi-axis turn-mill machining routines utilizing orthogonal Y-axis and BMT live tooling

Turn-mill machining centers TELFORD / Telford CNC FCL-280MY and FCL-310MY expand machining versatility through an integrated orthogonal Y-axis and BMT rotary tool indexing turret.

The internal servo drive transfers elevated torque to axial and radial driven tool holders, facilitating drilling, keyway slotting, face milling, and helical contouring. Discrete C-axis spindle contouring with a high-resolution optical encoder enables synchronized continuous circular interpolation.

Completing turning and milling operations in a single setup eliminates workpiece transfer discrepancies, enhancing geometric runout accuracy and reducing shop cycle durations.

High-speed precision turning on TELFORD FCL-160A lathes utilizing gang tooling plates

High-volume production of miniature precision hardware across electronics and instrumentation is optimized on TELFORD / Telford CNC FCL-160A lathes configured with gang-style linear tooling plates.

Eliminating indexable turret rotation removes tool positioning delays: transitions between boring bars, turning inserts, and drills occur through rapid carriage traverse along X and Z axes.

The compact cartridge spindle unit with precision dynamic balancing rotates up to 5000 RPM without thermal drift. Preloaded linear motion roller guideways deliver smooth micro-feed motions during finishing of electrical pins, bushings, and miniature hydraulic fittings.

Dynamic parameters and structural design of TELFORD TCM vertical machining centers

Vertical machining centers TELFORD / Telford CNC TCM-855 and TCM-1160 are engineered for rapid 3D contouring of injection molds, forging dies, and structural housings. The rigid box-column design and wide machine base absorb dynamic cutting loads during high-velocity milling routines.

The direct-drive BT40 spindle assembly achieves 10000-12000 RPM, reducing thermal distortion and eliminating belt transmission chatter.

The 24-station twin-arm automatic tool changer completes tool-to-tool swaps within 1.8-2.0 seconds, which combined with rapid traverse velocities up to 36-48 m/min minimizes auxiliary non-cutting cycle periods.

Maintenance guidelines for hydraulic systems, guideway lubrication and ball screw alignment

Long-term operational precision of TELFORD / Telford CNC machine tools relies on disciplined maintenance of lubrication and hydraulic circuits.

An automatic centralized lubrication distributor delivers measured shots of specialized machine oil to linear guide runners and ball screw nuts at programmed intervals.

Every 2000 operating hours requires replacement of ISO VG 46 hydraulic oil and filter cartridges within the power chuck hydraulic station. Checking ball screw axial play and spindle taper runout using calibrated dial indicators and test arbors preserves factory machining accuracy standards.

TELFORD / Telford CNC and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of TELFORD / Telford CNC and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.