Teroson / Henkel industrial adhesives, sealants, and functional coatings

High-performance silane-modified polymers, polyurethane sealants, and structural adhesives from Teroson / Henkel provide bonding, joint sealing, and corrosion protection for industrial assemblies.

TEROSON MS 930 and MS 939 industrial silane-modified polymer sealants

Elastic 1-part sealants from Teroson / Henkel formulated on silane-modified polymer technology cure upon exposure to ambient humidity. Terostat formulations yield durable flexible seals with outstanding ultraviolet resistance across industrial transportation assemblies.

Bubble-free curing mechanism forming elastic bonds with broad thermal stability
Direct primerless bonding across stainless steel, aluminum alloys, and polymers
Formulated without isocyanates, organic solvents, silicones, and PVC compounds
Selection of 310 ml cartridges and 570 ml foil packs by production parameters

TEROSON PU 9100 polyurethane seam sealants and direct glazing adhesives

High-modulus polyurethane adhesives and sealants from Teroson / Henkel are engineered for direct windscreen bonding and vehicle seam sealing. The thixotropic formulations prevent sag on vertical seams and absorb vibration energy throughout demanding vehicle duty.

Rapid green strength development ensuring secure component alignment upon application
High shear modulus and damping capacity absorbing dynamic structural oscillations
Proven resistance to weathering, road chemicals, and cyclic temperature variations
Precise pairing with black polyurethane primers and activation cleaning agents

TEROSON RB 81 and RB 4100 elastomeric butyl sealing tapes and cords

Permanently plastic self-adhesive butyl formulations from Teroson / Henkel deliver sealing across overlapping joints and metal enclosures. Butyl compounds retain elasticity over decades, preventing hardening and allowing non-destructive joint dismantling during overhaul.

Constant plasticity without shrinkage or embrittlement over extensive operational spans
High barrier protection against moisture ingress, dust infiltration, and water leaks
Cold installation without specialized hot dispensing equipment on clean substrates
Supplied as preformed flat sealing tapes, extruded round cords, and gun cartridges

TEROSON EP 5055 and EP 5065 structural impact-resistant epoxy adhesives

Two-component impact-resistant structural epoxy adhesives from Teroson / Henkel deliver bonding across high-strength steel and composite components. Formulations support spot welding and riveting, distributing operational mechanical strain evenly across joint surfaces.

Exceptional crash-durable lap shear strength under severe dynamic and shock loads
Full capability for spot welding execution straight through the uncured adhesive bead
Complete galvanic corrosion isolation between dissimilar joining metals and alloys
Ambient curing performance with rapid strength progression via thermal activation

TEROSON WX 215 protective coatings, cavity waxes, and underbody barrier systems

Anti-corrosion formulations from Teroson / Henkel include WX 215 penetrating cavity waxes and RB R2000 HS underbody protective coatings. The materials shield metal surfaces against road salt, gravel impact, and moisture, forming self-healing protective barrier films.

High capillary creep action penetrating narrow welding seams and internal cavities
Durable stone-chip resistance absorbing abrasive impacts from road gravel and grit
Flexible barrier layer resisting cracking under low-temperature winter operations
Efficient application using airless spray guns forming uniform runs-free coatings

TEROSON WT 112 DB liquid sound deadeners and acoustic vibration damping compounds

Aqueous vibration damping pastes from Teroson / Henkel in the WT 112 DB series reduce structure-borne noise across thin-sheet metal assemblies. The acoustic compounds suppress resonance throughout air ventilation ducts, driver cabins, and machine equipment housings.

High loss factor dissipating resonant vibrations across sheet steel and alloy panels
Water-based formulation free of toxic solvent fumes, heavy metals, and odors
Strict compliance with transportation fire safety, low smoke, and toxicity norms
Rapid spray application on vertical and overhead surfaces without sag or slump

Polymer chemistry and moisture-curing mechanism of TEROSON MS 930

Industrial sealants in the TEROSON MS 930 and Terostat MS 939 ranges utilize silane-modified polymer technology to bridge the operational gap between polyurethanes and silicones.

Free from isocyanates, solvents, and PVC plasticizers, SMP sealants prevent micro-bubbling during ambient curing under humid conditions. The polymer matrix crosslinks smoothly with atmospheric moisture, establishing an elastic network that absorbs vibrational stress.

The cured bead demonstrates long-term resistance to ultraviolet light, thermal cycling, and chemical degradation without requiring separate primers on clean steel, aluminum, and engineered thermoplastics.

Direct glazing engineering and seam bonding with TEROSON PU 9100

High-modulus polyurethane sealants including TEROSON PU 9100 and Terostat 8597 provide structural bonding across automotive windshields and industrial body seams. The thixotropic paste consistency resists sagging when applied along steep vertical joints.

Elevated shear modulus allows direct mechanical load transmission between glass and metal frames, stiffening structural vehicle shells against torsional flex.

Substrate preparation requires surface degreasing with Cleaner-D followed by black polyurethane primer PU 8519P to shield the adhesive interface from degradation under direct sunlight.

Flange sealing and vibration damping with TEROSON RB 81 butyl tapes

Permanently plastic butyl sealing tapes and preformed cords in the TEROSON RB 81 and RB 4100 series deliver moisture barriers across overlapping roof sheets and ventilation ducts. Butyl rubber compounds maintain flexibility over long service intervals without drying out, embrittlement, or shrinkage.

The material accommodates thermal expansion and contraction between dissimilar structural metals without bond disruption. Joint assemblies can be disassembled without damaging underlying substrates, facilitating routine access during scheduled plant maintenance and equipment inspections.

Mechanical strength and thermal curing profiles of TEROSON EP 5055

Two-component crash-resistant structural epoxy adhesives including TEROSON EP 5055 and EP 5065 deliver bond strength under dynamic impact and peel stresses.

Utilized in automotive body construction and sheet metal repair, these structural epoxies distribute stresses evenly across bonded seams while isolating dissimilar metals against galvanic corrosion.

Spot welding can be performed straight through the uncured bead without degrading electrical conductivity. Room-temperature curing can be accelerated through targeted infrared heating to achieve handling strength rapidly.

Corrosion protection with WX 215 cavity waxes and RB R2000 underbody barrier

Surface preservation materials from Teroson / Henkel include solvent-borne penetrating waxes and rubber-resin underbody coatings. TEROSON WX 215 cavity wax displays capillary penetration, flowing into internal welding seams and displacement moisture from narrow crevices.

TEROSON RB R2000 HS underbody protective coating forms an elastic film that resists abrasive stone impacts and road debris. During cold operations, the coating remains pliable and prevents salt-induced corrosion across structural frames, floor pans, and equipment underpinnings.

Acoustic damping and noise suppression with aqueous TEROSON WT 112 DB

Aqueous vibration-damping pastes in the TEROSON WT 112 DB series lower structure-borne acoustic emissions across thin-gauge steel and aluminum panels. Upon drying, the material establishes a monolithic damping layer with a high loss factor that converts vibrational kinetic energy into harmless heat.

Dispensed via airless spray equipment onto ventilation housings, machinery cowls, and vehicle bulkheads, the water-based formulation eliminates hazardous emissions and meets stringent industrial flammability requirements for enclosed operating environments.

Teroson / Henkel and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Teroson / Henkel and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.