Lavor / Lavorwash Machinery and Components

Technical assemblies and replacement components for Lavor / Lavorwash cleaning equipment: scrubber dryers, pressure cleaners, brush drive motors and suction pumps.

Floor Scrubber Dryers Lavor / Lavorwash Pro

Professional floor scrubber dryers by Lavor / Lavorwash including Crystal Clean, Dart, Dynamic and Comfort lines are engineered for continuous scrubbing in commercial centers and plants. They deliver balanced solution flow, motorized scrubbing action and deep fluid pickup.

Compact walk-behind scrubbers Crystal Clean and Sprinter for congested retail layouts
Battery-powered units Dart and Dynamic with heavy-duty scrub heads and steady pressure
Ride-on scrubber series Comfort engineered for expansive industrial facilities up to 3700 m2
Impact-resistant polyethylene recovery tanks with overflow shut-off and rapid flush drain

Brush Drive and Vacuum Motors Lavor / Lavorwash

Brush drive electric motors and suction turbines from Lavor / Lavorwash (featuring part code 5.501.0058) provide dependable rotational power and vacuum performance. These assemblies run on 24V DC battery circuits or 230V AC lines, engineered with heavy-duty winding insulation.

Electric motor 5.501.0058 engineered for disc scrub heads delivering dependable torque
Two-stage tangential suction turbine assemblies with moisture and foam baffle barriers
Durable carbon brushes with wear limit indicators for rapid inspection and replacement
Planetary gearboxes with hardened transmission pinions for smooth power transfer to heads

High-Pressure Cleaners Lavor / Lavorwash Pro

Industrial high-pressure cleaners by Lavor / Lavorwash including Alaska, Columbia-R and Hyper models deliver hot and cold pressurized streams for heavy-duty washdown operations. The pumps feature forged brass manifold heads, solid ceramic plungers and bypass unloader valves.

Crankshaft industrial pumps with forged brass manifolds and solid ceramic plunger sleeves
Low-speed 4-pole electric drive motors operating at 1450 RPM with liquid cooling jacket
High-efficiency vertical boiler assemblies with steel spiral coil delivering up to 140 C
Delayed Total Stop safety controls preventing hydraulic shock during trigger shut-off

Sweepers and Road Care Lavor / Lavorwash SWL

Industrial sweeping equipment by Lavor / Lavorwash including SWL 700, SWL 900, SWL R 850 and BSW lines cleans logistics depots, parking zones and workshops. Chevron main brooms and adjustable side brushes sweep solid debris into collection hoppers equipped with dust exhaust.

Chevron cylindrical brooms with tough polypropylene or steel bristle combinations
Pleated polyester panel filters paired with electric shaker mechanisms for dust removal
Rugged debris hoppers featuring manual or hydraulic high-dump disposal mechanisms
Heavy-duty polymer bumpers protecting internal belt drive pulleys from perimeter hits

Industrial Vacuum Cleaners Lavor / Lavorwash DTX

Industrial vacuum units by Lavor / Lavorwash including DTX, DTV, SMX and Pro Worker ranges handle continuous extraction of dry dust, metal turnings and coolant slurries. Three-phase side-channel turbines deliver continuous suction airflow without thermal drift during long runs.

Maintenance-free side-channel blowers rated from 2.2 kW to 5.5 kW for severe factory duty
Cartridge filters rated Class M and HEPA H14 featuring reverse-pulse pneumatic cleaning
Stainless steel collection drums equipped with drop-down release levers and roller wheel base
Liquid shut-off floats with hydrophobic barriers protecting motors during wet suction

Squeegee Bars and Seal Blades Lavor / Lavorwash

Floor squeegee assemblies, blades and consumable components by Lavor / Lavorwash ensure dry flooring without moisture streaks. The lineup offers natural latex blades for smooth tiles alongside oil-resistant polyurethane polymers for workshops running aggressive cutting emulsions.

Parabolic aluminum suction bars with trim adjustment dials and smooth tracking guide wheels
Slotted front and continuous rear polyurethane blades impervious to industrial lubricants
Heavy-wall flexible suction hoses reinforced with steel wire spirals and airtight cuffs
Disc scrub brushes bristled with polypropylene, nylon and silicon carbide Tynex grit

Selection and Replacement of Brush Drive Motor 5.501.0058

When selecting an electric motor for disc scrub heads under part number 5.501.0058 for Lavor / Lavorwash floor scrubbers, technicians must verify line voltage (24V DC battery circuit) and gearbox flange dimensions.

This motor delivers reliable torque to the planetary reduction gear on Comfort, Dart, and Free Evo machines. During installation, shaft alignment, flexible coupling condition, and electrical terminal crimps must be verified.

Threaded mounting studs should be torqued with a calibrated wrench to prevent housing distortion. Periodic carbon brush inspection and dry air blowing through brush holders keep commutator copper bars in optimal working order.

Diagnostics of Lavor / Lavorwash Suction Motors and Turbines

The vacuum motor on a Lavor / Lavorwash scrubber dryer is responsible for continuous recovery of spent fluid from floor surfaces through the parabolic squeegee assembly.

If suction drop occurs, technicians inspect vacuum line integrity, fluid shut-off float movement, and mesh basket filter condition in the recovery tank. Unusual turbine vibration signals rotor bearing play or impeller imbalance.

On dual-stage bypass turbines, keeping the secondary stator cooling duct free of airborne lint prevents thermal insulation degradation. A molded rubber isolation gasket around the mounting rim dampens structural vibration transfer to the tank body.

Adjustment and Alignment of Floor Squeegee Assemblies

Effective floor drying without moisture lines depends on accurate squeegee alignment on Lavor / Lavorwash scrubber units. Alignment begins by checking horizontal trim: the center thumb screw sets pitch, while side guide wheels govern blade height.

The working edge of the rear polyurethane or natural latex blade should bend backward evenly at approximately 45 degrees along its entire width. When the lower edge shows wear, the blade is turned to expose a fresh margin — Lavor profiles offer fourfold use per blade.

For workshops running aggressive cutting fluids and mineral oils, specialized APEX polyurethane blades ensure lasting performance.

Maintenance of Lavorwash Industrial High-Pressure Plunger Pumps

Industrial high-pressure cleaners by Lavor / Lavorwash rely on crankshaft pumps featuring forged brass manifolds and solid ceramic plungers. Scheduled preventative maintenance requires checking synthetic compressor lubricant levels inside the pump crank housing every 500 operating hours.

Milky fluid coloration indicates worn water seals admitting wash solution into the oil bath. Plunger seal replacement includes inspecting ceramic sleeves for hairline cracks or pitting.

Valve plug retaining bolts must be torqued in a diagonal criss-cross sequence to prevent distortion of stainless steel intake and discharge valve seats under peak pressure cycles.

Monitoring Dust Filtration Systems and Electric Shakers

On Lavor / Lavorwash sweeping machines from the SWL and BSW series, the primary barrier against airborne dust is a pleated polyester panel or pocket filter. Dust suppression efficiency depends on the electric shaker mechanism that drops accumulated dust into the waste hopper.

Filter inspections involve verifying the rubber perimeter seal gasket and cycling the automatic vibration timer. When pore clogging occurs, the filter element is removed and washed using neutral water solutions under gentle pressure.

Reinstallation into the sweep chamber is conducted only after the fabric has dried completely to preserve designed air permeability.

Scheduled Service Routine for Lavor Pro Floor Scrubber Dryers

A thorough maintenance routine for Lavor / Lavorwash Pro floor scrubber equipment encompasses traction wheel drives, planetary gearboxes, battery compartments, and solution dispensing manifolds.

Flushing both clean and dirty fluid tanks after each operational shift prevents silt buildup and solenoid valve clogging. Monthly battery checks include electrolyte density readings and terminal bolt torque verification.

On machines with powered wheel drive, technicians verify parking brake air gap and drive tire tread wear. Lubricating squeegee pivot linkages and scrub head suspension joints ensures smooth vertical travel during active floor cleaning.

Lavor / Lavorwash and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Lavor / Lavorwash and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.