FLIPSKY / Guangdong Flipsky Technology motor controllers and power electronics

Programmable VESC motor controllers, brushless drive motors, and power electronics engineered by FLIPSKY / Guangdong Flipsky Technology deliver high efficiency across automated robotic platforms, AGVs, and light electric propulsion.

FLIPSKY 75100 Pro V2.0 programmable motor controllers with aluminum PCB

FLIPSKY / Guangdong Flipsky Technology 75100 Pro V2.0 programmable speed controllers feature an aluminum PCB designed around VESC architecture. The unit operates from 14V to 84V with 100A continuous current, supporting FOC vector modes, CAN, and UART ports.

Operating direct voltage input spanning 14V to 84V suitable for 4S to 20S battery packs
Continuous phase current capacity of 100A with peak transient thresholds reaching 150A
Integrated support for advanced FOC sine wave commutation and standard BLDC square wave
Digital hardware connectivity including CAN bus, high-speed UART, and AS5047 position encoders

FLIPSKY FSESC 75200 high-power speed controllers with water-cooling enclosure

FLIPSKY / Guangdong Flipsky Technology FSESC 75200 speed controllers are rated for operational voltages up to 84V and 200A continuous current. The sealed aluminum housing incorporates a liquid cooling jacket that dissipates thermal energy under prolonged heavy duty.

Continuous operating phase current of 200A with peak motor current capability up to 300A
Sealed aluminum cooling housing with integrated hose barbs for fluid circulation loop
Onboard thermal sensor monitoring for power MOSFET switches preventing thermal overload
Seamless software configuration via universal VESC Tool graphical parameter interface

FLIPSKY FSESC 75350 heavy-duty motor inverters for peak loads up to 350A

FLIPSKY / Guangdong Flipsky Technology FSESC 75350 motor inverters handle continuous currents up to 350A across 84V systems. Featuring heavy aluminum cooling blocks, thick copper busbars, and low-loss phase filtering, the unit drives high-torque robotic platforms.

Maximum continuous current delivery reaching 350A with surge reserve for high torque
Heavy aluminum block construction with integrated fluid channels for thermal removal
Heavy-gauge 8AWG copper power leads minimizing internal impedance and heat generation
Programmable regenerative braking returning kinetic energy into primary battery units

FLIPSKY 65161 waterproof brushless motors with 6000W output power

FLIPSKY / Guangdong Flipsky Technology 65161 brushless motors generate 6000W mechanical output inside a fully sealed IP68 housing. Available in 100KV and 120KV winding versions, they resist saltwater corrosion in marine propulsion, hydrofoils, and underwater ROVs.

Peak mechanical output power reaching 6000W operating under nominal 75V direct supply
Comprehensive IP68 ingress protection shielding winding assemblies from water ingress
Dual velocity constants of 100KV and 120KV optimized for direct propeller propulsion
High-grade stainless steel drive shaft featuring keyway profile for impellers and hubs

FLIPSKY Anti-Spark Switch smart electronic power switches up to 300A

FLIPSKY / Guangdong Flipsky Technology Anti-Spark Switch smart electronic power units suppress arc discharge and voltage spikes when energizing circuits up to 84V. Rated for 200A and 300A continuous currents with aluminum heat sinks, they protect motor electronics.

Continuous direct current handling up to 300A preventing connector pitting and damage
Effective precharge arc suppression when connecting high-capacitance motor controllers
Substantial aluminum heat spreader cooling parallel arrays of low-resistance MOSFETs
Illuminated momentary power button providing visual feedback and clean circuit startup

FLIPSKY VX4 PRO wireless remote control systems with Hall sensor throttle

FLIPSKY / Guangdong Flipsky Technology VX4 PRO wireless remotes feature contactless Hall-effect throttle triggers and color telemetry screens. Operating across robust 2.4 GHz frequency bands, the unit streams speed, current, and pack voltage data from the drive.

Contactless Hall-effect throttle lever delivering linear acceleration sensitivity
High-resolution color telemetry screen displaying operational velocity and voltage
Interference-resistant 2.4 GHz radio link with compact companion receiver module
Bidirectional UART digital communication returning real-time controller status data

FOC vector tuning and firmware configuration for 75100 Pro V2.0 units

Programmable speed controllers from FLIPSKY / Guangdong Flipsky Technology in the 75100 Pro V2.0 product generation are developed on open-source VESC architecture optimized for field-oriented control.

FOC algorithms sample motor phase currents via high-precision shunt resistors, generating sinusoidal stator flux without torque ripple.

Compared with traditional trapezoidal commutation, sinusoidal control curtails high-frequency acoustic emission, elevates mechanical efficiency under light loads, and yields smooth startup behavior from zero velocity.

Through the VESC Tool software environment, automation engineers run automated identification routines for winding inductance and rotor flux linkage to match regulation loops precisely to connected permanent-magnet motors.

Aluminum heatsink thermal dissipation and liquid cooling loops for FSESC series

Heavy-duty speed controllers designed by FLIPSKY / Guangdong Flipsky Technology across the FSESC 75200 and FSESC 75350 lines dissipate substantial thermal energy when commutating continuous currents between 200A and 350A.

To prevent thermal stress on power MOSFET switches, the units utilize precision-machined aluminum radiator housings with integrated fluid circulation channels.

Forced liquid flow through sealed hose barbs stabilizes semiconductor junction temperatures below eighty-five degrees Celsius under continuous duty.

Onboard thermal sensors continuously stream temperature readings to the microcontroller, engaging proportional current derating if heat extraction drops, which shields power electronics from breakdown.

Submersible IP68 stator encapsulation and marine protection for 65161 motors

Brushless electric motors developed by FLIPSKY / Guangdong Flipsky Technology in the 65161 series operate directly immersed in water for marine thrusters, unmanned watercraft, and robotic systems.

Stator windings and rotor magnet arrays receive void-free epoxy encapsulation providing high dielectric endurance and complete isolation from saline water.

The motor shell is machined from anodized alloy, while the primary drive shaft is turned from high-grade stainless steel with precision radial shaft seals.

Dynamic rotor balancing suppresses mechanical vibration across high-speed rotation, maintaining dependable hydrodynamic thrust during continuous underwater work.

Precharge arc suppression via smart Anti-Spark Switch units in 84V systems

Connecting high-voltage battery banks up to 84V to brushless motor inverters causes large capacitive inrush current spikes.

Electronic switching modules engineered by FLIPSKY / Guangdong Flipsky Technology in the Anti-Spark Switch Smart lineup eliminate damaging electrical arcs through controlled precharge stages.

Parallel arrays of low-resistance power MOSFETs gradually elevate bus conductivity, protecting power connectors from contact pitting and surface degradation.

A heavy aluminum heat plate absorbs brief transient thermal dissipation, ensuring safe switching operation for vehicle electrical distribution harnesses.

Contactless Hall throttle calibration and wireless telemetry for VX4 handsets

Industrial wireless remote systems from FLIPSKY / Guangdong Flipsky Technology within the VX4 PRO family employ non-contact Hall-effect sensors inside the throttle trigger mechanism for mechanical durability.

Eliminating resistive potentiometer tracks prevents mechanical wear and ensures linear speed demand across extended operational lifespans. The frequency-hopping 2.4 GHz digital link transmits real-time drive commands without latency or electromagnetic interference from motor phase lines.

A color screen displays complete telemetry from the controller: rotational speed, motor phase current, battery voltage, and diagnostic warning alerts.

CAN bus, UART, and PPM digital interface integration in automated AGV platforms

Multi-protocol communication ports onboard FLIPSKY / Guangdong Flipsky Technology motor controllers simplify integration into robotic platforms, AGV transport units, and automated industrial machinery.

The CAN bus interface supports real-time multi-node velocity and torque setpoint transmission, facilitating synchronized drive steering. A high-speed UART port delivers structured telemetry packets to main supervisory computers.

Simultaneous support for conventional PPM pulse signals and digital rotor position inputs streamlines retrofit projects across diverse industrial motion platforms.

FLIPSKY / Guangdong Flipsky Technology and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of FLIPSKY / Guangdong Flipsky Technology and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.