Hörmann / Hormann industrial door systems and automation equipment

Industrial sectional doors, high-speed doors, drive operators, and loading dock equipment engineered by Hörmann / Hormann deliver reliable performance across logistics hubs and factories.

Hörmann / Hormann SPU F42 and ALR F42 industrial sectional door systems

Hörmann / Hormann industrial sectional doors SPU F42, SPU 67 Thermo, and ALR F42 are built to seal exterior industrial plant and warehouse openings. Insulated steel sandwich panels filled with polyurethane rigid foam deliver thermal isolation and robust structural rigidity.

Double-skinned steel section panels in 42 mm and 67 mm profiles with thermal breaks
Bottom door leaf sections complete with flexible floor seals and protective end caps
Track assemblies equipped with torsion spring counterbalances and smooth guide rollers
Aluminum glazed frame sections APU utilizing scratch-resistant DURATEC synthetic panes

Hörmann / Hormann HS and V series industrial high-speed door solutions

Hörmann / Hormann high-speed doors HS 7030 PU, V 5015 SEL, and V 6030 SEL optimize plant transport logistics and preserve internal ambient conditions. Contactless spiral roll-up mechanisms enable smooth operating speeds up to 2.5 meters per second during intense freight cycles.

High-speed spiral curtains with insulated door sections enabling silent travel cycles
Flexible SoftEdge bottom profiles providing automatic resetting after unintended impacts
Integrated optoelectronic light grilles mounted directly within lateral guide columns
Variable-frequency drive assemblies engineered for uninterrupted high-volume traffic

Hörmann / Hormann WA 300, WA 400, and WA 500 industrial shaft operators

Hörmann / Hormann industrial shaft drive operators WA 300, WA 400, WA 500, and flanged direct units S140 automate heavy sectional and rolling doors. Robust gearbox transmissions, emergency manual disconnect mechanisms, and absolute limit encoders deliver dependable control.

Three-phase and single-phase motor gear units with soft start and soft stop motion profiles
Direct shaft mounting via splined hub adapters without needing external console brackets
Manual emergency hand chain mechanisms for dependable manual opening during power outages
Digital absolute encoders ensuring millimeter positioning without mechanical limit cams

Hörmann / Hormann 460T, 445, and 560 industrial door control units

Microprocessor control units and logic boards Hörmann / Hormann 460T, 445 R, 360, 545, and 560 govern industrial drives and peripheral detection sensors. The control module regulates motion profiles, monitors safety edge optosensors, and drives multi-color status displays.

Microprocessor logic board modules 460T with numeric segment displays for diagnostics
Dedicated wiring terminals for optical safety edges, light grilles, and pushbuttons
Pluggable screw-clamp terminal strips simplifying field maintenance on motor circuits
Integrated HCP system bus interface with expansion bays for BiSecur radio receivers

Hörmann / Hormann SB and Decotherm industrial rolling shutters and grilles

Hörmann / Hormann industrial rolling shutters SB, classic, and Rollgitter close large plant apertures where ceiling clearance is limited. The shutter curtain spools into a compact coil above the lintel, maintaining overhead pipework, electrical trays, and crane tracks unobstructed.

Galvanized steel and aluminum Decotherm S profiles with protective polymer primer coats
Vertical guide tracks fitted with wear-resistant synthetic noise-dampening sliding strips
Tension spring counterbalance technology reducing drive loads and extending gearing life
Perforated rolling grilles designed for ventilated underground parking and utility vaults

Hörmann / Hormann HLS, HTL, and DDF industrial loading bay systems

Hörmann / Hormann loading dock equipment HLS, HTL, DDF, and Vorsatzschleusen provides streamlined transfer hubs between industrial facilities and transport trucks. Hydraulic dock levellers compensate for elevation gradients between warehouse floors and vehicle flatbeds.

Electro-hydraulic dock levellers configured with hinged lips or extending telescopic lips
Durable curtain and inflatable dock seals DDF shielding temperature-sensitive goods
External loading houses Vorsatzschleusen expanding usable internal warehousing footprint
Heavy-duty rubber and steel buffer bumpers absorbing docking kinetic impact energies

Thermal performance and structural design of SPU F42 and SPU 67 sectional doors

Hörmann / Hormann industrial sectional doors in model series SPU F42 and SPU 67 Thermo are engineered to close conditioned plant facilities, logistics centers, and cold-storage distribution hubs.

Door panel sections are roll-formed from hot-galvanized sheet steel surrounding a pressure-injected polyurethane rigid foam core without chlorofluorocarbons.

In SPU 67 Thermo configurations, panel segments are separated by continuous thermal breaks that prevent cold bridging and eliminate moisture condensation under freezing ambient exposure.

Resilient EPDM synthetic rubber seals surround the doorway perimeter, maintaining air tightness during wind load exposure conforming to European industrial benchmarks.

High-speed spiral and flexible roll-up door technology in HS and V model series

Hörmann / Hormann high-speed spiral doors HS 7030 PU and flexible vertical curtains V 5015 SEL and V 6030 SEL isolate differing climatic environments while handling relentless material flows.

Non-contact spiral consoles guide door sections upward without friction wear or mechanical noise at opening velocities reaching 2.5 meters per second.

The built-in aluminum SoftEdge bottom bar incorporates flexible crash-yielding inserts that prevent personnel injury and avoid damage to industrial forklifts during accidental contact.

An optical light grille monitors the complete travel plane, stopping downward curtain movement whenever an obstruction appears across the opening threshold.

Shaft-mounted drive kinematics in WA 300, WA 400, and WA 500 operator systems

Electric door operators engineered by Hörmann / Hormann across WA 300, WA 400, and WA 500 model lines mount directly onto the torsion spring shaft without intermediary mounting consoles or sprockets.

An integrated worm gearing transmission delivers high torque while providing soft acceleration and cushioned deceleration profiles near travel endpoints. An emergency manual disconnect mechanism allows operators to engage a hand chain mechanism during facility electrical outages.

Built-in digital absolute multi-turn encoders monitor shaft rotation, preserving position limits during power interruptions and eliminating manual adjustments of mechanical limit switches.

Electronic logic architecture of 460T, 445 R, and 560 microprocessor controllers

Microprocessor control units Hörmann / Hormann 460T, 445 R, 360, 545, and 560 manage motor operations, safety edge sensors, BiSecur wireless receivers, and external signalization.

The 460T control board features a numeric display for adjusting functional parameters and diagnosing maintenance status codes on site. The logic module continuously measures resistance values across optical bottom edge sensors and photoelectric eyes, halting door motion if an optical circuit opens.

Detachable terminal blocks simplify wiring connections for push-button stations, safety light curtains, wicket door interlock contacts, and inductive floor vehicle detection loops.

Design parameters of SB industrial rolling shutters and Decotherm curtain slats

Hörmann / Hormann industrial rolling shutters SB, classic, and Rollgitter grilles close wide plant doorways where overhead space is restricted by cranes or piping runs.

Decotherm S curtain profiles are roll-formed from galvanized steel with a durable polyester primer coat, injected with polyurethane foam to dampen acoustic resonance.

Tension spring counterbalance mechanisms offset curtain weight during coil rotation, reducing mechanical stress on motor gearing and prolonging bearing service life.

Wear-resistant synthetic guide strips positioned within vertical guide channels ensure quiet slat travel and restrain lateral curtain shift under wind forces.

Engineering of HLS dock levellers, Vorsatzschleusen houses, and DDF dock seals

Hörmann / Hormann dock levelling equipment HLS with hinged lips, HTL with telescopic lips, and Vorsatzschleusen loading houses streamline freight handling across logistics terminals.

Electro-hydraulic power packs with dual lifting cylinders align the leveller platform with truck bed elevations, compensating for vehicle tilting as lift trucks enter.

Curtain dock seals DDF with tear-resistant front flaps mounted on spring-loaded perimeter frames enclose truck perimeters, preventing draft entry and moisture intrusion. External loading houses position complete docking stations beyond exterior building walls, expanding internal floor area.

Hörmann / Hormann and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hörmann / Hormann and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.