WBR / WBR Battery Industrial Batteries

Industrial sealed lead acid storage batteries by WBR / WBR Battery (WBR Batterien GmbH) utilizing AGM and GEL VRLA technologies for UPS, telecom and utility power.

High Rate Industrial Batteries Series HR and HRL (HR1221W F2)

WBR high rate lead acid batteries of HR and HRL series engineered for uninterruptible power supplies and critical data center backup systems. The batteries deliver enhanced power output during short discharge intervals up to 15 minutes, low internal resistance and superior thermal stability.

Delivers 20 percent higher power density compared with conventional general purpose batteries
High purity lead calcium grid alloy minimizing internal gas evolution and water consumption
Terminal configurations F2 and threaded brass inserts ensuring stable high current connections
Flame retardant ABS housing with one way safety relief valve preventing air ingress

General Purpose VRLA AGM Batteries Series GP

WBR series GP maintenance free sealed lead acid batteries utilizing advanced AGM VRLA technology. The batteries are designed for buffer standby and cyclic operations in security systems, telecommunications exchanges, emergency illumination devices and precision industrial instrumentation.

Absorbent glass mat separator immobilizing liquid acid electrolyte within fiber pores
Safe operation in multiple spatial orientations without risk of electrolyte leakage
Expected service lifetime exceeding 5 years under float charge conditions at ambient level
Minimal self discharge rate below 3 percent per month during standard storage at 20 degrees

Long Life Stationary Industrial Batteries Series GPL

WBR series GPL long life sealed lead acid batteries offering an extended operational design lifespan up to 10 to 12 years in float standby applications. Specifically suited for electrical substations, server racks, telecommunication switching nodes and critical infrastructure sites.

Heavy duty positive plate design delivering exceptional corrosion resistance and durability
Extended service lifespan up to 10 to 12 years in float operation at ambient 25 degrees
High internal oxygen recombination efficiency exceeding 99 percent via microporous AGM
Superior deep discharge recovery performance restoring nominal capacity rapidly

Front Terminal Telecom Batteries Series TPL

WBR series TPL front terminal battery modules engineered for mounting inside standard 19 inch and 23 inch telecom enclosures. The compact front access layout facilitates safe electrical busbar connection, rapid thermal inspection and voltage testing across telecommunication exchanges.

Front access terminal layout simplifying ongoing inspection and torque maintenance
Narrow footprint dimensioned to fit standard 19 inch and 23 inch communication rack bays
Integrated central venting exhaust system facilitating external gas tube redirection
Service lifetime up to 12 years under controlled temperature inside telecom enclosures

Deep Cycle Traction Batteries Series EVX

WBR deep cycle traction batteries of series EVX designed for electric pallet trucks, industrial floor sweepers, golf carts and mobile aerial platforms. Heavy duty positive paste formulations and dense plate compression guarantee up to 400 cycles at 100 percent depth of discharge.

Delivers 400 cycles at 100 percent depth of discharge and over 700 cycles at 70 percent DoD
Reinforced active material formula with microfibers preventing premature positive shedding
Sealed maintenance free architecture eliminating need for periodic distilled water refill
High impact polypropylene housing resisting severe transport shock and vibration stresses

Lead Carbon and GEL Industrial Batteries Series GPC and GPLG

WBR lead carbon and gel electrolyte batteries series GPC and GPLG engineered for solar power installations, wind generation and hybrid microgrids. Nano carbon additives within negative plates prevent irreversible sulfation during operation in partial state of charge (PSoC) conditions.

Carbon nano composites suppress sulfation under frequent partial charge cycling conditions
Thixotropic silica gel electrolyte preventing acid stratification inside tall cell spaces
Extended cycling life up to 1500 discharge cycles at 70 percent DoD for solar applications
Wide operational temperature spectrum spanning from minus 40 to plus 60 degrees Celsius

Manufacturing infrastructure of WBR / WBR Battery and German engineering

German manufacturer WBR Batterien GmbH has been developing and distributing industrial lead acid storage batteries utilizing AGM and GEL VRLA technologies since 2011.

The Berlin central engineering headquarters oversees comprehensive quality assurance procedures, from virgin lead ingot purity to automated cell balancing and enclosure pressure sealing.

Operational standards strictly adhere to international management criteria ISO 9001 and environmental protection guidelines ISO 14001.

WBR power solutions are designed for mission critical facilities where unconditioned grid outages risk industrial disruption. Industrial batteries undergo rigorous factory testing for valve hermeticity, internal impedance and emergency discharge performance under extreme electrical loads.

AGM and GEL VRLA technologies in WBR industrial batteries

In valve regulated WBR VRLA batteries, the acid electrolyte is fully immobilized inside microporous fiberglass AGM separators or stable silica gel matrices.

This architecture prevents sulfuric acid stratification across cell height and eliminates any requirement for distilled water replenishment throughout the design life. Internal oxygen recombination efficiency exceeds 99 percent, enabling safe operation inside closed electrical enclosures.

Each cell incorporates a one way elastomeric safety relief valve. The valve releases excessive gas buildup during abnormal overcharging events and seals shut instantly to prevent ambient oxygen penetration into the plate pack.

Rugged flame retardant ABS plastic housings provide high mechanical protection against external shock and environmental impacts.

High rate batteries WBR series HR and HRL for UPS units

The WBR HR and HRL series are engineered for uninterruptible power supply (UPS) installations in data centers, network operations centers and critical IT server clusters.

The principal engineering benefit of the HR series is a 20 percent higher power density during short interval discharges lasting between 5 and 15 minutes. This advantage reduces the total number of parallel battery strings needed inside equipment racks.

Optimized plate grid geometry and minimal internal resistance guarantee negligible voltage drop under peak inverter load surges. Models with F2 suffix feature widened terminal blades ensuring reliable high current transfer without localized thermal hotspots at connection points.

Stationary batteries series GP, GPL and TPL for telecom networks

For telecommunications hubs, electrical distribution substations and industrial control systems, WBR supplies the GP, GPL and TPL battery product lines. Series GP offers dependable standby backup with an expected service lifespan up to 5 years.

Long life GPL monoblocks with thickened positive plates provide stable operation up to 10 to 12 years under continuous float charging at 20 to 25 degrees Celsius.

Front terminal TPL models feature compact narrow housings designed for direct installation into standard 19 inch and 23 inch communication racks.

Terminal placement along the front face simplifies routine voltage measurement, thermal imaging scans and busbar torque inspections without removing monoblocks from rack shelves.

Deep cycle traction EVX and lead carbon GPC series for cyclic duty

For heavy duty cyclic applications in industrial floor scrubbers, material handling pallet trucks and renewable energy installations, WBR offers the EVX and GPC product families.

Series EVX withstands up to 400 full discharge cycles at 100 percent DoD thanks to reinforced active paste composition and vibration resistant plate compression inside heavy duty polypropylene housings.

Lead carbon GPC batteries integrate functional nano carbon materials within negative electrode formulations. This carbon network provides an electrical conduction pathway and impedes irreversible lead sulfate accumulation during operation in partial state of charge (PSoC).

Consequently, service life reaches up to 1500 cycles at 70 percent DoD in off grid solar arrays.

Industrial battery selection for WBR / WBR Battery and logistics

We assist in selecting WBR / WBR Battery industrial energy solutions based on model designations (such as HR1221W F2, GPL 12750, TPL 121000), required amp hour ratings, nominal voltage and project engineering documentation.

Our technical specialists calculate necessary string configurations using official discharge data tables to satisfy required autonomy intervals and cutoff voltages.

Quotations detail part numbers, delivery timelines and competitive pricing terms. International shipments are securely palletized according to dangerous goods transportation regulations for electrical storage devices and dispatched through proven logistics freight carriers.

WBR / WBR Battery and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WBR / WBR Battery and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.