Giben industrial beam saws and edgebanding machinery

Giben industrial beam saws and edgebanders: Matic SP, Prisma SPT, KG-268, KG-365, KG-706, saw carriages, guide rails, pressure beams, and G-Vision XP controls.

Giben Matic SP series front-loading automatic industrial beam saws

Giben Matic SP front-loading beam saws deliver high precision sizing for wood panels and composite sheets in volume production. The design integrates a nine-gripper pusher driven by digital servos, a 20 HP saw carriage arbor, and a dedicated G-Vision XP control terminal.

Cutting length specifications of 3300mm and 3800mm suited for large panels
Heavy pusher beam equipped with nine pneumatic grippers for sheet packs
Variable saw carriage feed velocity adjustable up to 100 meters per minute
Dedicated G-Vision XP graphical interface for dynamic pattern optimization

Giben Prisma SPT heavy rear-loading industrial beam saw sizing centers

Giben Prisma SPT rear-loading beam saw centers deliver high-speed sizing for dense wood panels in multi-shift plants. Engineered for book heights up to 120mm, the machine achieves carriage traversal velocities reaching 170 m/min while maintaining ±0.2mm positioning accuracy.

Integrated rear scissor lift table for automated pallet and book feeding
Main blade projection reaching 135mm enables clean cutting of thick books
Powerful 30 HP main saw arbor motor built for arduous industrial processing
High-velocity carriage return cycles maximize overall daily output rates

Giben KG-268 and KG-365 series automatic throughfeed edgebanders

Giben KG-268JSA and KG-365 throughfeed edgebanders apply coiled PVC and solid wood edging to panel perimeters. Work stations incorporate twin diamond pre-milling heads, a rapid-melt glue reservoir, dual-motor end trimming saws, and dedicated corner rounding units.

Dual-spindle diamond pre-milling station removes edge scoring imperfections
Quick-heating glue applicator pot optimized for granulated EVA adhesives
High-precision corner rounding unit creates smooth seam transitions on corners
Profile scrapers and oscillating buffing wheels provide pristine edge sheen

Giben KG-665 and KG-706 heavy-duty industrial edgebanding lines

High-throughput Giben KG-665JSKA and KG-706 edgebanding lines handle continuous operation in high-volume cabinet plants. Model KG-706 features nine automated work stations with independent servo axis positioning, enabling instant changeovers between edge tape thicknesses.

Nine heavy processing stations featuring independent servo axis drives
Variable feed track propulsion operating smoothly between 16 and 24 m/min
Automated station changeover executed directly from the central touchscreen
Rigid welded steel chassis isolates vibrations to preserve tool alignment

Giben saw carriages, pressure beam assemblies, and precision blades

Giben saw carriage sub-assemblies preserve cutting geometry and prevent laminate chip-out during high-speed sizing. Offerings include hardened linear guide rails, carriage guide rollers, pneumatic pressure cylinders, carbide-tipped main blades, and adjustable scoring arbors.

Precision carriage rollers riding on sealed heavy-duty radial bearings
Pneumatic pressure beams fitted with resilient protective contact strips
High-torque drive belts and reinforced cable systems for smooth travel
Independent scoring saw arbors with micrometer vertical and lateral tuning

Giben pusher feeder components, sheet grippers, and CNC modules

Giben motion components and automation hardware govern positioning of heavy panel stacks across the cutting envelope. Solutions include pneumatic sheet grippers, X/Y servo drives, digital feedback encoders, and dedicated G-Vision XP industrial controller modules.

Heavy-duty pneumatic sheet grippers engineered for book stability
Digital servo motors coupled to hardened precision rack-and-pinion rails
Optical limit switches and magnetic stroke sensors for table monitoring
Industrial input/output boards and CPU modules powering G-Vision XP units

Invention of pressure beam sizing technology by Gino Benuzzi

Italian mechanical engineer Gino Benuzzi established Giben in 1947, laying the groundwork for high-yield panel sizing methodology across global wood processing plants.

Before the 1970s, furniture factories relied upon conventional table saws with manual workpiece feed, creating safety hazards, dimensional variance, and veneer chipping along panel perimeters.

Benuzzi developed and patented the pressure beam concept with an automated saw carriage traveling below the work envelope. This breakthrough enabled simultaneous sizing of panel stacks exceeding 100mm with sub-millimeter precision.

In 2014, the Giben brand integrated into the Anderson Group, uniting European machine tool precision with advanced CNC motion automation.

Kinematic design and structural architecture of Matic SP beam saws

Giben Matic SP front-loading beam saws are engineered for continuous multi-shift operation within medium and large cabinet manufacturing plants. The heavy machine frame is built from tubular welded steel profiles that undergo thermal stress relief.

The saw carriage travels along hardened precision linear guide rails propelled by a steel-reinforced synchronous timing belt.

A 20 HP main saw motor spins circular blades up to 400mm in diameter, working with an independent scoring arbor to prevent laminate chip-out. The rear programmable pusher incorporates nine two-finger pneumatic sheet grippers with floating suspensions to accommodate warped panels.

Motion positioning is tracked through a closed-loop magnetic linear encoder.

Heavy-duty Prisma SPT rear-loading complexes for volume production

For high-throughput industrial plants with continuous production flows, Giben manufactures heavy-duty Prisma SPT rear-loading sizing centers. The system pairs with an automated hydraulic lift table supporting five-ton sheet bundles loaded by forklift.

The automated pusher indexes pre-set stack heights up to 120mm into the cutting area, minimizing manual handling.

Main blade projection of 135mm allows clean single-pass cutting through thick stacks of laminated board. Feed velocity adjusts smoothly up to 100 m/min, while rapid carriage return hits 170 m/min via a lightweight aluminum alloy carriage.

The pneumatic pressure beam incorporates independent pressure zones to safeguard delicate veneer or high-gloss panel finishes.

Tooling stations and processing units on Giben KG edgebanders

Giben KG throughfeed edgebanders apply coiled PVC, ABS, polypropylene, and thick solid wood strips up to 15mm. The entry zone incorporates a pre-milling station powered by two high-frequency electro-spindles with diamond helical cutters.

This pre-milling stage removes scoring marks and edge deviations, producing a square panel edge for optimal adhesive bonding.

The gluing unit features a quick-melt Teflon-lined glue reservoir and a textured applicator roller ensuring uniform adhesive distribution. The pressure zone employs a large driven primary roller and secondary conical compression rollers.

Finishing stations include dual-motor end trimming saws with 15-degree bevel adjustment, corner rounding units, and profile scrapers.

Production automation with the G-Vision XP software interface

Giben sizing centers and production equipment operate under the proprietary G-Vision XP software environment running on an industrial PC. The touch interface displays active cutting patterns, strip turning sequences, fence coordinates, and real-time carriage positioning.

The integrated optimization engine generates cost-effective cutting plans minimizing panel scrap.

G-Vision XP integrates with factory MES and ERP platforms over Ethernet networks, retrieving cutting orders from centralized databases and transmitting progress records.

Workstations connect with thermal transfer barcode label printers to mark finished workpieces, streamlining handoffs to subsequent edgebanding and CNC drilling stages without routing confusion.

Maintenance guidelines, replacement parts, and precision tooling

Equipment reliability and precision across Giben machinery depend upon regular preventive maintenance schedules and timely replacement of wear items. In beam saws, operators inspect carriage guide rollers, pressure beam protective strips, drive belt tension, and pusher pneumatic grippers.

Regular dust removal via felt lubricators preserves steel linear guide surfaces.

Matching tooling geometry to panel density is essential: main blades with triple-chip carbide teeth pair with split scoring blades. In edgebanding units, glue reservoirs require scheduled cleaning, while scraper blades require regular exchange with factory-profiled inserts.

Regional service teams supply pneumatic actuators, drive belts, and G-Vision XP electronic modules.

Giben and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Giben and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.