Industrial automation and robotic tooling Gimatic / GIMATIC

Select Gimatic / GIMATIC pneumatic grippers, automatic tool changers, rotary units, and position sensors matching your robotic system specifications.

Parallel pneumatic grippers in DHG, GS and PB series

Parallel pneumatic grippers from Gimatic / GIMATIC across DHG, GS, and PB series ensure dependable part gripping along automated assembly cells. Dual-piston drive units generate elevated holding power, while rigid prismatic guides prevent deflection during swift cycles.

Jaw stroke ratings from 2 to 200 mm with repeatability reaching five microns
Compact body profiles forged from anodized aluminum alloy protecting pistons
Built-in fluid supply ports and longitudinal slots for mounting position units
Selection of replacement seal kits, finger jaws, and bushings via part tags

Angular and radial grippers with opening angles up to 180 degrees

Angular and radial grippers by Gimatic / GIMATIC handle bulky workpieces within cramped mold spaces and stamping presses. Gripper jaws swing clear up to 180 degrees, freeing unloading zones completely and speeding up robotic manipulator cycle times across production plants.

Lever linkage mechanisms equipped with heat-treated alloy steel pivot pins
Extended holding reach engineered for secure handling of molded plastic parts
Adjustable mechanical stop screws for precise opening angle synchronization
Selection of replacement pivot jaws, internal linkage rods, and piston seals

Automatic and manual robot tool changers in QC and EQC series

Robotic tool changers from Gimatic / GIMATIC in QC and EQC series minimize changeover times on automated assembly systems. Pneumatic locking mechanisms ensure rigid coupling of modular end effectors while interconnecting pneumatic circuits and electrical feedback channels.

Payload capacity ratings spanning from 5 to 150 kg for ISO robot tool plates
Built-in fluid ports fitted with self-sealing check valves to prevent leaks
Multipole electrical connector blocks for transmitting digital sensor signals
Selection of replacement lock rings, utility adapter plates, and pin blocks

Magnetic and inductive position sensors for C-slots and T-slots

Specialized position sensors by Gimatic / GIMATIC across SN, SS, SB, and SM model ranges monitor piston movement in grippers and pneumatic cylinders. Units slide directly into C-slots and T-slots on actuator profiles, supplying crisp discrete or analog signals to host PLCs.

Solid-state magnetoresistive and reed switch circuits resisting interference
Bright LED state indicators facilitating rapid physical alignment on tooling
Ingress protection rated to IP67 featuring oil-resistant flexible PUR cables
Selection of sensor leads with M8 plugs, flying leads, and mounting brackets

Linear guide actuators and rotary pneumatic modules in SL, OF and RR series

Linear slides and rotary pneumatic modules by Gimatic / GIMATIC in SL, OF, RR, and AR series operate inside pick-and-place transfer cells. Robust assemblies provide smooth linear motion and rotary indexing for workpieces supported by integrated adjustable fluid shock absorbers.

Linear stroke lengths reaching 500 mm over hardened steel precision guide rods
Rotary stroke angles of 90 and 180 degrees featuring fine-tune mechanical stops
Elevated dynamic payload torque ratings withstanding heavy offset tooling loads
Selection of shock absorber cartridges, slide carriages, and shaft seal sets

GN pneumatic air nippers and EOAT tooling components for molding robots

Pneumatic air nippers in the GN series along with vacuum assemblies from Gimatic / GIMATIC handle sprue separation and plastic ejection on injection presses. Modular tooling mounts onto lightweight robot profiles, ensuring clean trimming without damaging finished molded parts.

Interchangeable carbide alloy cutting blades shaped for diverse resin polymers
Direct and reverse acting pneumatic cylinders with spring return blade resets
Heat-resistant silicone suction cups paired with quick-release vacuum pumps
Selection of replacement blades, tension return springs, and bracket pivots

Kinematic architecture and clamping dynamics of DHG parallel pneumatic grippers

Parallel pneumatic grippers from Gimatic / GIMATIC in the DHG product generation deliver rigid part retention for robotic handling systems. The structural body is machined from anodized aluminum alloy with precision prismatic guide ways that prevent finger deflection under high angular forces.

Opposing dual-piston architecture develops elevated holding forces within a compact profile. Longitudinal profile slots accept flush-mounted magnetic sensors for rapid open and close position detection.

DHG grippers function reliably across compressed air pressures spanning from two to eight bar throughout standard factory ambient temperatures.

Angular and radial grippers for robotic tooling with jaw clearance to 180 degrees

Angular and radial grippers manufactured by Gimatic / GIMATIC across MPT and MPZ lines excel in handling bulky workpieces within cramped mold envelopes.

Synchronized lever linkages swing jaws through opening angles reaching one hundred eighty degrees, clearing the unloading perimeter entirely for unobstructed part retrieval. Pivot pins forged from heat-treated alloy steel prevent angular backlash over millions of operating cycles.

The robust mechanism easily supports lengthened tooling fingers, gripping intricate structural components without introducing surface deformation or localized strain.

Automatic QC robot tool changers with integrated pneumatic and signal connections

Robotic tool changers in the QC and EQC series by Gimatic / GIMATIC streamline tooling swaps across modern flexible manufacturing cells. The master robot adapter couples with the tooling plate via a pneumatic ball-locking mechanism that creates a rigid connection devoid of mechanical play.

During coupling, internal pneumatic conduits with self-sealing check valves mate seamlessly with multipole electrical connector blocks. Integrated limit switches monitor lock engagement continuously, preventing accidental detachment during swift robotic path trajectories.

Specialized magnetic position sensors for C-slot and T-slot mounting profiles

Gimatic / GIMATIC position sensors in SN, SS, SB, and SM model ranges monitor internal piston travel within pneumatic grippers and cylinders. The miniature sensor housing fits directly into C-slots, T-slots, or dovetail channels without protruding beyond actuator boundaries.

Solid-state magnetoresistive circuits generate clean PNP or NPN switching signals that connect directly to programmable logic controllers.

Integrated indicator LEDs simplify physical sensor alignment during tooling commissioning, while oil-resistant PUR cables withstand repeated flexure in harsh factory conditions.

Linear pick-and-place actuators and pneumatic rotary units in SL and RR ranges

Linear actuators in the SL series and rotary units in the RR series from Gimatic / GIMATIC provide modular building blocks for multi-axis handling apparatus.

In SL linear units, the tooling carriage travels over hardened steel guide shafts supported by recirculating ball bushings, ensuring tracking precision and resilience against moment loads.

RR rotary cylinders utilize rack-and-pinion drivetrains with adjustable mechanical hard stops for ninety and one hundred eighty degree rotations. Onboard hydraulic shock absorbers dissipate kinetic momentum gently at end strokes to stop vibration.

Pneumatic air nippers and vacuum EOAT components for injection molding robots

Gimatic / GIMATIC GN series air nippers and modular vacuum components perform automated sprue cutting and part removal on plastic molding machines. Miniature nipper cylinders fitted with durable carbide cutting blades snip sprues cleanly inside mold cavities prior to packaging.

The vacuum tooling line includes durable polyurethane and silicone suction cups, pivoting connectors, and multi-stage ejector pumps with rapid atmospheric release features.

The modular extrusion framing system enables engineers to assemble custom multi-point end effectors tailored to individual production requirements.

Gimatic / GIMATIC and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Gimatic / GIMATIC and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.