GIUSSANI / Giussani S.r.l. Temperature Calibrators and Test Benches

GIUSSANI / Giussani S.r.l. calibration instruments and hydrostatic test benches: engineering selection of dry blocks, thermostatic baths, and pressure test pumps.

Portable dry-block temperature calibrators PYROS series

Portable dry-block temperature calibrators from GIUSSANI / Giussani S.r.l. across PYROS series provide dependable on-site verification of resistance thermometers and thermocouples. Units feature precision micro-controllers, interchangeable inserts, and uniform heating zones.

PYROS 140, PYROS 375, and PYROS 650 models operating over span from -28 deg C to +650 deg C
Interchangeable metal equalization blocks machined for various probe stem diameters
High-resolution color display showing heating rates and real-time thermal stabilization status
Digital RS232 and USB communication ports for automated calibration data recording to PC

High-temperature dry-block calibrators Quartz and Solar

High-temperature dry-block heating units from GIUSSANI / Giussani S.r.l. across Quartz and Solar lines deliver thermal testing for severe industrial environments. Multi-zone heating elements eliminate axial gradients, maintaining steady thermal equilibrium throughout test cycles.

Operating temperature spans reaching up to +1200 deg C for heavy-duty furnace thermocouples
Multi-zone internal heating coils designed to minimize vertical temperature non-uniformity
Programmable ramp-and-soak temperature controller with non-volatile setpoint memories
Insulated exterior metal housing preventing heat transfer to laboratory workbench surfaces

Stirred liquid thermostatic baths BK40M and TB300M

Open-tank overflow calibration baths from GIUSSANI / Giussani S.r.l. across BK40M and TB300M series enable precise verification of unusually shaped temperature probes and glass thermometers. Continuous fluid agitation eliminates hot spots, providing uniform thermal stability.

Operating temperature span from -40 deg C to +300 deg C depending on selected calibration fluid
Deep open tank fitted with overflow weir enabling complete sensor immersion during testing
Magnetic stirrer drive delivering fluid circulation without mechanical vibration transfer
Compatible with silicone heat-transfer fluids, alcohol mixtures, and pure demineralized water

High-pressure hydraulic comparison calibration test pumps

Self-contained hydraulic comparison pumps from GIUSSANI / Giussani S.r.l. generate test fluid pressure for verifying industrial pressure gauges, transmitters, and switches. The integrated fine-volume screw press allows micro-metering of fluid pressure without hydraulic shock.

Maximum operating fluid pressure generating capability reaching up to 7000 bar with oil or water
Precision fine volume screw press facilitating smooth alignment with calibration scale marks
Dual pressure ports with standard threads for reference digital gauge and device under test
Fully mechanical field-ready construction operating independently of external electric power

Hydraulic pressure test benches BPF series

Engineered test benches from GIUSSANI / Giussani S.r.l. across BPF series execute static, pulsing, and burst hydrostatic tests on pipes, hoses, valves, and fittings. Enclosed testing chambers provide operator protection while digital sensors monitor leak rates and burst events.

Static hydrostatic pressure test capabilities spanning adjustable pressures from 1 to 250 bar
Configured for multi-layer composite pipes, flexible hoses, pump bodies, and plumbing valves
Reinforced protective testing enclosure featuring interlocked transparent safety viewing window
Digital instrumentation recording pressure drop curves and water hammer endurance cycles

Software package AQ2sp and Giussani Marine Kit solutions

The proprietary AQ2sp calibration software from GIUSSANI / Giussani S.r.l. automates thermal sensor comparisons against calibrated standards, calculating errors and generating digital reports. For shipboard metrology, the rugged Marine Kit provides complete vibration-tolerant testing.

Automated test routine execution and digital reporting for RTD Pt100 sensors and thermocouples
Specialized Marine Kit packaged inside a heavy-duty transport container with connection adapters
Bidirectional computer communication controlling setpoints and reading real-time temperatures
Meets technical requirements of ISO 9001 quality systems and marine classification registries

Field calibration of industrial temperature sensors with PYROS portable dry blocks

Dry-block temperature calibrators from GIUSSANI / Giussani S.r.l. across PYROS series facilitate routine field verification and recalibration of Pt100 RTDs and thermocouples without hazardous liquid baths. Precision metal inserts provide rapid heat transfer and uniform radial heating profiles.

Technicians insert process sensors alongside reference standards to compare readings across multi-point setpoints. Microprocessor controls maintain target temperatures within five hundredths of a degree, while built-in digital interfaces stream inspection records to AQ2sp documentation software.

Laboratory temperature verification using BK40M and TB300M stirred baths

Stirred calibration baths BK40M and TB300M from GIUSSANI / Giussani S.r.l. accommodate oddly configured thermal probes, glass thermometers, and sanitary temperature elements.

The open top tank with outer overflow channel maintains stable fluid levels while eliminating air contact at immersion points. Operators select specialized silicone oils for high thermal ranges up to 300 deg C or ethanol formulations for deep sub-zero verification down to -40 deg C.

A magnetically coupled circulating impeller drives continuous fluid movement across integrated heat exchangers, establishing uniform thermal distribution.

Hydraulic comparison pumps for high pressure calibration duties up to 7000 bar

Self-contained hydraulic comparison pumps from GIUSSANI / Giussani S.r.l. generate test fluid pressures up to 7000 bar for verifying industrial pressure transmitters and mechanical dial gauges.

Operating without electrical cords, the system serves remote pipeline stations and industrial plant workshops. A primer lever pump rapidly pre-fills test circuits, followed by a fine volume screw press that allows micro-stepping directly onto calibration scale divisions.

Utilizing mineral oil or distilled water, rigid test manifolds prevent pressure pulsations and protect delicate transmitter diaphragms.

Hydrostatic and burst pressure qualification protocols on BPF test benches

Engineered test benches from GIUSSANI / Giussani S.r.l. across BPF series evaluate structural integrity and burst resistance for industrial valves, multilayer composite pipes, and hydraulic hoses.

Test assemblies mount securely inside heavy armor testing enclosures equipped with interlocked transparent inspection windows. Automated hydraulic power units deliver test pressures from 1 to 250 bar, running automated water hammer sequences, prolonged hold stages, and ultimate burst tests.

High-speed pressure transducers capture pressure transients, outputting graphs directly to operator stations.

Automating calibration records and polynomial fits using AQ2sp software suite

The AQ2sp metrology software from GIUSSANI / Giussani S.r.l. connects temperature and pressure calibration hardware into a unified digital calibration loop.

The program loads manufacturer tables, calculates Callendar-Van Dusen interpolation coefficients for platinum RTDs, and quantifies deviation errors.

Upon completing multi-step verification runs, the system creates tamper-resistant digital test sheets containing setpoint stability data and reference standard readings. Eliminating manual transcription mistakes, AQ2sp accelerates laboratory documentation throughput.

Marine Kit calibration packages for shipboard thermal equipment maintenance

Routine maintenance of temperature sensors on marine propulsion engines, boilers, and auxiliary machinery requires rugged portable calibration gear. The Giussani Marine Kit from GIUSSANI / Giussani S.r.l.

incorporates a vibration-isolated dry block heater alongside assorted threaded adapters tailored to shipboard immersion wells. Calibrators retain precision despite vessel vibration, ambient moisture, and salt air in engine compartments.

Internal cold-junction compensation and vessel power inputs allow marine engineers to verify critical safety alarms.

GIUSSANI / Giussani S.r.l. and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of GIUSSANI / Giussani S.r.l. and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.