Glong Electric / Glong industrial equipment and pump systems

Industrial electric motors and water pumps from Glong Electric / Glong deliver dependable performance across pumping skids, swimming pools, and hydraulic circuits.

Three-phase asynchronous motors series MS, EMS, HMS

Three-phase asynchronous motors by Glong Electric series MS, EMS, HMS, and MSD in aluminum housing drive industrial pumps, blowers, and process lines. The construction provides effective heat dissipation, resistance to operational vibration, and smooth continuous operation.

Aluminum alloy housing with longitudinal cooling fins for balanced thermal dissipation
Ingress protection standard IP55 and class F electrical winding thermal insulation
Standardized mounting flanges B3, B5, B14, and B35 compliant with IEC dimensions
Selection of stator windings, rotor shafts, terminal boxes, and end shields by nameplate

High-efficiency three-phase motors series JE IE3 and IE4

High-efficiency electric motors series JE manufactured by Glong Electric comply with international energy efficiency classes IE3 and IE4. Premium lamination steel reduces magnetic losses, limits thermal dissipation, and reduces power consumption across continuous manufacturing machinery.

Standardized frame sizes from 80 to 250 mm with output ratings from 0.75 to 55 kW
Reduced magnetizing currents and optimized power factor across full torque curves
Reinforced bearing assemblies engineered for extended running lifespan under high loads
Selection of replacement bearings, fan impellers, and protective cowls via catalog code

Permanent magnet brushless synchronous motors series TYC

Brushless synchronous electric motors series TYC from Glong Electric combine compact external dimensions with impressive torque density. The permanent magnet rotor architecture pairs with frequency inverters to enable precise speed regulation and reliable torque control in modern automation.

Elevated electromagnetic power density housed within compact aluminum alloy shells
Brushless rotor architecture eliminating friction commutators and carbon brush wear
Smooth variable speed regulation from minimal creeping velocities up to nominal RPM
Selection of rotor magnets, shaft position sensors, and seal connectors by part number

Circulation and variable speed pool pumps series FCP and PMPPC

Water pump units engineered by Glong Electric in series FCP, PMFCP-750S, and PMPPC provide dependable recirculation, filtration, and water flow in swimming pools. Each unit integrates a pre-filter strainer, durable hydraulic impellers, and corrosion-resistant mechanical shaft seals.

Integral strainer basket with transparent inspection lid for convenient maintenance
Variable speed digital motor control featured in PMPPC series for energy optimization
Engineered composite polymer hydraulic volute resistant to chlorinated and saline water
Selection of replacement impellers, diffusers, mechanical seals, and filter baskets

Whirlpool spa pumps series BTP for bathtubs and wellness systems

Compact hydromassage water pumps developed by Glong Electric in series BTP are engineered for whirlpool bathtubs, hot tubs, and spa systems. The refined internal fluid chamber suppresses hydrodynamic noise while embedded thermal overload protectors safeguard the motor windings.

Low-noise hydraulic body with smooth volumetric fluid acceleration for quiet operation
Built-in thermal overload protection switch preventing winding damage during stall events
Compatible with pneumatic and electronic safety switches for humid environment isolation
Selection of replacement carbon-ceramic seals, run capacitors, and connection unions

Multistage centrifugal pumps series HMP and VMP

Horizontal and vertical multistage centrifugal pumps from Glong Electric series HMP and VMP deliver elevated water head pressures across industrial water distribution, booster skids, and chiller circuits. The segmented modular design generates high pressure within a compact footprint.

Segmented stage chambers equipped with durable stainless steel impellers and diffusers
High discharge pressure generation combined with stable volumetric throughput metrics
Resilient mechanical shaft seals featuring silicon carbide and graphite friction faces
Selection of pressure stage diffusers, coupling flanges, O-rings, and drive shafts

Engineering design and heat dissipation of Glong aluminum housing motors

Three-phase asynchronous electric motors engineered by Glong Electric in series MS, EMS, and HMS utilize lightweight aluminum alloy frames manufactured via precision pressure molding.

Longitudinal heat dissipation ribs along the frame perimeter maximize thermal dissipation surface area, maintaining stable continuous winding temperatures under standard S1 duty cycles.

Dynamic balancing of the squirrel-cage rotor limits mechanical vibrations, prolonging drive bearing life and suppressing ambient acoustics in production facilities.

Standardized mounting flanges B3, B5, and B14 conform to IEC dimensional specifications, enabling direct replacement across industrial pumps, compressors, and fans.

Energy efficiency optimization and IE3/IE4 standards in JE series motors

Industrial electric motors in the JE series developed by Glong Electric engineers meet premium international energy efficiency standards IE3 and IE4 defined by IEC 60034-30. The stator core incorporates low-loss electrical lamination steel to minimize core losses and prevent motor overheating.

Optimized slot geometry and high-density copper winding configurations enhance operating efficiency up to 94-96% depending on output ratings.

Operating JE motors across continuous pumping stations, industrial blowers, and conveyors provides manufacturing plants with measurable reductions in electrical consumption and total ownership costs.

Brushless permanent magnet rotor architecture in TYC synchronous motors

Synchronous electric motors from Glong Electric in series TYC feature rare-earth permanent magnet rotors, delivering high torque density within a compact frame.

Eliminating slip rings and carbon brushes removes mechanical wear and electrical arcing, allowing continuous duty without periodic brush maintenance.

When paired with modern variable frequency inverters, TYC drives maintain dependable starting torque and precise velocity regulation across wide operating speed envelopes.

This performance profile makes them an outstanding match for precision metering pumps, packaging conveyors, and modern industrial automation systems.

Hydraulic volute design and pre-filter technology in FCP and PMPPC pool pumps

Specialized water pump assemblies in series FCP, PMFCP-750S, and PMPPC by Glong Electric are built for closed recirculation, sanitization, and filtration loops in commercial and residential swimming pools.

The pump housing is molded from glass-reinforced polypropylene, providing total chemical immunity against chlorinated pool water and saline solutions. An integrated pre-filter chamber featuring a transparent inspection lid captures debris before fluid reaches the impeller.

Digital variable speed models in the PMPPC range allow automated volumetric adjustment based on pool usage, significantly curtailing utility costs.

Acoustic dynamics and thermal overload protection in BTP whirlpool pumps

Circulation pump modules in series BTP are developed by Glong Electric for whirlpool bathtubs, hot tubs, and therapeutic spa installations requiring low noise emissions.

The hydraulic volute incorporates a smooth diffuser geometry that suppresses turbulence, prevents cavitation knocking, and minimizes pipe resonance.

Thermal overload protection switches embedded directly within the stator windings isolate electrical power during mechanical stall events or power anomalies.

Resilient mechanical shaft seals with silicon carbide and graphite friction faces prevent water intrusion into the motor housing under elevated fluid temperatures.

Segmented stage configuration and high pressure delivery in HMP and VMP pumps

Multistage centrifugal pumps from Glong in series HMP (horizontal) and VMP (vertical) are designed for demanding fluid loops requiring high pressure heads at moderate flow rates.

The modular construction comprises sequential stage chambers, each housing a stamped stainless steel impeller and diffuser. This stacked architecture generates high pressure heads within a compact footprint.

These pumps are widely deployed across industrial water booster skids, boiler feed systems, reverse osmosis water purification units, and automated manufacturing plant fire protection networks.

Glong Electric / Glong and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Glong Electric / Glong and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.