PAN WORLD / Pan World Europe Chemical Magnetic Drive Pumps

PAN WORLD / Pan World Europe sealless centrifugal chemical pumps: engineering selection of hermetic fluid equipment and replacement components for surface finishing and chemical processing.

Compact magnetic drive chemical pumps NH-PX series

Compact sealless pumps from PAN WORLD / Pan World Europe across NH-PX series utilize magnetic coupling to move corrosive acids and alkaline solutions. The seal-free build prevents chemical leakage during continuous circulation in industrial surface treatment and plating setups.

NH-5PX, NH-10PX, NH-30PX, and NH-50PX models delivering flow up to 80 l/min and head to 13.5 m
Wetted parts formed from glass-fiber reinforced polypropylene PPG and PVDF fluoropolymers
High-purity Al2O3 ceramic shafts with silicon carbide SiC thrust bearings to minimize wear
Integrated single-phase electric drive motors equipped with thermal overload protectors

Brushless direct current chemical pumps NH-PI series

Hermetic pumps from PAN WORLD / Pan World Europe across NH-PI series feature 12V and 24V brushless direct current motors for portable installations and closed fluid loops. The lineup provides precise liquid dosing and continuous chemical feed at operating temperatures from 0 to 90 °C.

Liquid delivery spans from 1 up to 76 l/min with adjustable discharge head reaching 21.1 m
High-endurance brushless DC motors offering extended service lifetime without brush wear
Wetted flow components resist degradation from nitric, sulfuric, and hydrochloric reagents
Hose barb connections and standardized pipe threads facilitating rapid equipment assembly

Heavy industrial magnetic drive chemical pumps PW series

Industrial sealless pumps from PAN WORLD / Pan World Europe across PW series handle high-volume corrosive transfer up to 1400 l/min (84 m³/h). Reinforced one-piece flanges and balanced internal hydraulics reduce dynamic losses across processing plants and bulk chemical transfer lines.

Volumetric capacity reaching 1400 l/min with maximum liquid discharge head up to 44 meters
PPG and PVDF wetted materials providing defense against concentrated alkaline solutions
Standard mounting interface designed for IEC and NEMA three-phase induction electric motors
Integral DIN, ANSI, and JIS pipe flanges ensuring rigid integration into processing piping

Fluoropolymer sealless chemical pumps PWE and PWE-F

Heavy-duty chemical pumps from PAN WORLD / Pan World Europe across PWE and PWE-F series feature conductive CFRETFE fluoropolymer liners for pure acids and organic solvents. The PWE-F design complies with ATEX directives for hazardous environments within chemical refinery complexes.

Fluid discharge rate up to 500 l/min (30 m³/h) paired with hydraulic head reaching 32 meters
Carbon-reinforced CFRETFE fluoropolymer volute with high resistance to strong oxidizers
Explosion-proof architecture meeting ATEX Directive 2014/34/EU requirements for zones 1 and 2
Structural polymer motor bracket eliminating exterior atmospheric corrosion near tanks

Circulation sealless chemical pumps PS and PS-D series

Compact chemical pumps from PAN WORLD / Pan World Europe across PS and PS-D series provide continuous circulation of cooling media, deionized water, and etching acids. Equipment integrates smoothly into industrial laser chillers and semiconductor wafer manufacturing cooling circuits.

Operational discharge spanning from 5 to 100 l/min with fluid head developing 2 to 12.5 meters
Low operating acoustic emissions and minimal vibration through precision rotor balancing
Direct current PS-D variants delivering low electrical draw for autonomous cooling modules
Hermetic boundary enclosure prevents evaporative loss of expensive thermal cooling fluids

High head pumps PWH and slurry handling models PW-C

Specialty pumps from PAN WORLD / Pan World Europe across PWH and PW-C series deliver high hydraulic head up to 42 meters and handle crystallizing chemical solutions. The PW-C execution incorporates wear-resistant silicon carbide SiC friction pairs defending against micro-abrasive erosion.

Hydrostatic head reaching up to 42 meters alongside dependable corrosive liquid delivery
PW-C modifications utilizing SiC ceramic components for salt slurries and plating baths
Reinforced fluoropolymer rear isolation shell absorbing sudden process pressure surges
Optimized impeller vane profiles maintaining high hydraulic efficiency during transfer

Sealless magnetic drive architecture of NH-PX chemical pump series

Centrifugal sealless pumps from PAN WORLD / Pan World Europe across NH-PX series provide dependable fluid handling without dynamic shaft seals. By transmitting driving torque across a stationary containment shell via permanent magnets, the pump isolates process liquids from external surroundings.

Molded fluid ends fabricated from glass-fiber reinforced polypropylene PPG or PVDF fluoropolymer withstand aggressive pickling acids, hot electroplating solutions, and alkaline rinses.

High-purity alumina ceramic shafts and silicon carbide thrust bearings absorb dynamic hydraulic thrust, delivering quiet continuous fluid circulation across automated chemical finishing and etching installations.

Brushless direct current motors powering NH-PI chemical pump series

Compact low-voltage pumping units from PAN WORLD / Pan World Europe across NH-PI series incorporate energy-efficient 12V and 24V brushless direct current electric drives.

The brushless motor topology eliminates mechanical commutators and carbon brush debris, enabling continuous duty inside cleanroom environments and mobile chemical processing skids.

Delivering fluid flow up to 76 l/min with discharge head reaching 21.1 meters, NH-PI pumps provide smooth flow regulation, rapid dynamic response, and low thermal dissipation when circulating corrosive chemicals through analytical equipment and compact process modules.

Heavy industrial magnetic drive pumps PW series for high fluid throughput

Large-scale chemical transfer pumps from PAN WORLD / Pan World Europe across PW series serve bulk chemical manufacturing plants, industrial wastewater treatment facilities, and acid scrubbing towers.

Delivering fluid volumes up to 1400 l/min (84 m³/h) and discharge head up to 44 meters, PW units handle demanding chemical transfer duties. Heavy-section PPG and PVDF volutes feature external structural reinforcement ribs to handle dynamic piping nozzle loads.

Flanged connections compliant with DIN and ANSI piping standards simplify direct integration, while standardized IEC motor mounts accept standard industrial electric motors.

Conductive CFRETFE fluoropolymer pumps PWE and PWE-F with ATEX compliance

Engineered for hazardous petrochemical environments and aggressive organic solvents, PAN WORLD / Pan World Europe PWE and PWE-F chemical pumps feature conductive CFRETFE fluoropolymer construction.

This carbon-reinforced fluoropolymer facilitates static electrical dissipation, satisfying stringent ATEX Directive guidelines for explosion-hazardous production sectors.

A structural polymer motor bracket isolates metallic drive housings from acidic atmospheric vapors surrounding open chemical tanks, preventing corrosion and ensuring dependable pumping performance at process liquid temperatures reaching 90 °C.

Hermetic circulation pumps PS and PS-D series for thermal management circuits

PAN WORLD / Pan World Europe sealless pumps across PS and PS-D series deliver uninterrupted coolant circulation in closed liquid cooling loops for industrial laser cutting machinery, medical diagnostic scanners, and semiconductor processing tools.

Precision dynamic balancing of internal impeller magnets minimizes vibration and operational acoustic noise.

Hermetic isolation prevents fluid loss of specialized glycol mixtures, fluorinated dielectric cooling liquids, and high-purity deionized water, maintaining stable thermal equilibrium across temperature-regulated electronics modules.

High head PWH pumps and slurry handling models PW-C with silicon carbide

To overcome high hydraulic resistance in compact chemical piping networks, PAN WORLD / Pan World Europe manufactures high head centrifugal pumps of PWH series developing up to 42 meters of fluid head.

For process liquids with crystallizing salts, electroplating slurries, and micro-abrasive fines, the PW-C configuration incorporates sintered silicon carbide SiC internal bearings and thrust rings.

The hydraulic profile eliminates dead zones where salts could precipitate, preserving continuous high operating efficiency across chemical processing lines.

PAN WORLD / Pan World Europe and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of PAN WORLD / Pan World Europe and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.