Goot industrial soldering stations, irons and spare parts

Industrial ESD-safe soldering stations of series RX, dual-wattage and ceramic irons TQ and PX, solder pots POT, replacement tips and heating elements by Goot.

Antistatic soldering stations Goot series RX-802AS

Lead-free soldering stations RX-802AS with eighty watts output are engineered for precision PCB rework and dense electronic assemblies. Microprocessor control maintains set temperatures stably and delivers rapid heat recovery to three hundred fifty degrees in six seconds.

Fast slide change tip mechanism allowing hot tip replacement without tools
Ergonomic lightweight handpiece RX-80GAS equipped with flexible silicone cord
Integrated automated sleep and power shutdown modes saving heating energy
Digital key lock protection preventing unauthorized preset alterations

Heavy-duty soldering stations Goot series RX-852AS

Industrial stations RX-852AS with one hundred fifty watts output and dual-port systems RX-822AS are designed for heavy multi-layer boards and high thermal mass planes. High heating capacity prevents thermal drops when touching large copper conductor traces.

High power output delivering rapid heat transfer for lead-free solder alloys
Independent dual port temperature settings on twin station model RX-822AS
Digital temperature calibration function matching specific tip geometries
Static dissipative ESD enclosure protecting sensitive semiconductor chips

Dual-power quick heat soldering irons Goot TQ series

Quick heat soldering irons TQ-77 pistol style and TQ-95 pencil style feature dual-stage ceramic heating units. Trigger activation instantly boosts power from twenty watts idle to two hundred watts high output, easily warming bulky connector lugs and relay tabs.

Instant power boost to two hundred watts through ergonomic trigger switch
Durable ceramic heating element delivering excellent electrical efficiency
Impact resistant heat insulated body engineered for comfortable hand balance
Interchangeable long life tips series RD-67BC and TQ-77RT with iron plating

Temperature-controlled soldering irons Goot series PX-280

Handheld soldering irons PX-280 and PX-201 combine soldering station capabilities inside an ergonomic handle. A digital display shows tip temperatures between two hundred and five hundred degrees, while internal sensors adjust thermal output dynamically.

Digital display and adjustment buttons integrated directly into the handle
High performance ceramic element providing rapid recovery for lead-free jobs
Key lock digital passcode protection supporting strict plant regulations
Compatibility with widely used long lasting replacement tips series PX-2RT

Replacement soldering tips and heating elements Goot

Precision soldering tips of series RX-80HRT, RX-85HRT and PX-2RT are produced at the Taiyo Electric plant in Japan from pure oxygen-free copper. Multi-layer iron, nickel and chromium plating provides high resistance against aggressive fluxes and wear.

Extensive selection of tip geometries including chisel, conical, bevel and knife
Tight mechanical thermal contact with built-in high accuracy sensor elements
Replacement heating units PX-28H, KS-60H and TQ-77H for equipment overhaul
Thick protective iron layer at the working edge for prolonged tip lifespan

Solder pots and desoldering maintenance tools Goot

Equipment for tinning and desoldering includes solder pots POT-21C and POT-28C, vacuum pumps GS-108 and copper wick CP-1515. Alloy and stainless steel solder pots withstand continuous high molten alloy temperatures without erosion of bath walls.

Temperature adjustable solder pots for rapid dipping of wire harnesses and lugs
Corrosion resistant alloy bath on POT-28C suited for aggressive molten alloys
Antistatic desoldering pumps GS-158 for cleaning through-hole board pads
Pure copper desoldering braids CP series for swift removal of excess solder

Precision thermal control and rapid tip change on RX-802AS stations

Industrial soldering stations of the Goot RX-802AS series are engineered by Taiyo Electric in Japan for high-density multi-layer printed circuit boards and fine-pitch SMD components.

A central technical advantage of the RX-802AS platform is the integration of the heating element and responsive thermocouple sensor inside a unified RX-80HRT cartridge tip.

Because thermal resistance between the heater core and tip point is minimized, the unit heats from ambient temperature to three hundred fifty degrees Celsius in just six seconds.

The digital microprocessor controller immediately compensates for heat loss upon touching ground planes, while the slide-change holder lets operators swap hot tips safely without extra tools.

High-wattage lead-free soldering of heavy assemblies with RX-852AS and RX-822AS

When assembling power electronics modules, wide copper busbars, RF shielding frames and heat sinks, standard soldering irons suffer temperature drops at the joint interface.

To address demanding thermal loads, Taiyo Electric developed the one hundred fifty watt RX-852AS high-power station and the RX-822AS dual-channel system.

Elevated heater output enables smooth soldering with high-melting lead-free alloys while shortening dwell time to protect adjacent components from thermal stress.

On the dual-channel RX-822AS station, two independent handpieces operate simultaneously — pairing a one hundred fifty watt heavy-duty handpiece with a nimble seventy-two watt RX-80GAS iron.

Dual-stage power boost in TQ-77 and TQ-95 quick-heat soldering irons

Handheld dual-wattage soldering irons of the Goot TQ-77 pistol-grip series and TQ-95 pencil-style series combine the delicacy of a precision iron with the thermal punch of a heavy-duty tool.

During normal standby operation, the internal ceramic heating element draws twenty watts, maintaining suitable temperatures for discrete components and fine signal wiring.

Squeezing the integrated finger trigger multiplies power output tenfold to two hundred watts, delivering rapid thermal boost for soldering thick relay terminals, metal connectors and heavy wire harnesses.

The impact-resistant polycarbonate handle insulates the operator hand during intensive assembly tasks.

Portable digital temperature-controlled irons of series PX-280 and PX-201

For field service technicians, commissioning engineers and compact assembly benches, Goot manufactures the mains-powered temperature-controlled irons PX-280 and PX-201.

The closed-loop sensor feedback electronics are housed directly inside the heat-insulated ergonomic grip, eliminating bulky external power transformers on the workbench.

On the PX-280 model, an integrated digital display allows exact temperature adjustment between two hundred and five hundred degrees Celsius, complete with a three-digit passcode lock to enforce factory process standards.

High-efficiency ceramic heaters sustain stable thermal recovery across both leaded and lead-free solder formulations.

Metallurgical structure and durability of Taiyo Electric replacement tips

The Taiyo Electric manufacturing plant in Fukuyama, Japan performs complete machining and multi-layer electroplating of replacement soldering tips across the RX-80HRT, RX-85HRT, PX-2RT and TQ-77RT families.

Each tip core is precision-turned from high-conductivity oxygen-free copper and plated electrolytically with a uniform protective barrier of pure iron.

The outer shank receives corrosion-resistant chromium plating to stop molten solder from creeping up the stem, while the working end is pre-tinned at the factory.

For scheduled tool maintenance, matching replacement ceramic and nichrome heating elements such as PX-28H, TQ-77H and KS-60H are produced.

Dip tinning in POT solder baths and precision desoldering tools

Preparing wire harnesses, enameled coil leads and multi-pin transformer terminals in volume production is streamlined by stationary Goot solder pots POT-21C and POT-28C.

Units in the POT-28C series feature a specialized grey iron crucible engineered to resist chemical dissolution and high-temperature erosion when holding aggressive lead-free molten tin alloys.

For safe component removal and cleaning of through-hole pads without board delamination, technicians rely on antistatic vacuum desoldering pumps GS-108 and GS-158 alongside rosin-fluxed pure copper desoldering braids of the CP series in widths from one millimeter to three point five millimeters.

Goot and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Goot and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.