BZO-Pneumatik pneumatic cylinders and valves

BZO-Pneumatik industrial pneumatic components: ISO 15552 and ISO 6432 cylinders, electropneumatic directional valves, KH ball valves, and KSS fittings.

BZO-Pneumatik ISO 15552 standard pneumatic profile cylinders

BZO-Pneumatik ISO 15552 pneumatic profile cylinders are engineered for demanding automated factory machinery. The hard-anodized profile housing features integrated sensor slots and adjustable end-position cushioning to suppress kinetic impact forces during linear strokes.

Adjustable pneumatic end cushioning suppresses kinetic shock at cycle stroke ends
Hard-anodized aluminum profile housing with recessed proximity sensor slots
Hardened chrome-plated piston rod with wear-resistant polyurethane seal packings
Standardized VDMA mounting flanges and clevis brackets for modular assembly

BZO-Pneumatik ISO 6432 miniature round pneumatic cylinders

BZO-Pneumatik ISO 6432 round mini pneumatic cylinders are designed for high-speed automated packaging machinery and handling systems. The corrosion-resistant stainless steel barrel with rolled end caps ensures extended service life within ultra-compact spatial footprints.

Stainless steel cylinder barrel with precision rolled end cap construction
Bore diameters ranging from 8 mm to 25 mm tailored for tight machinery spaces
Integrated permanent magnetic ring for non-contact piston position sensing
Pre-lubricated polymer seal packings ensure smooth long-term sliding motion

BZO-Pneumatik electropneumatic directional control valves

BZO-Pneumatik pneumatic directional valves in 3/2, 5/2, and 5/3 configurations provide accurate switching of compressed air streams. Manifold sub-base mounting and interchangeable solenoid coils accelerate the modernization of complex industrial control valve cabinets.

Solenoid-actuated and air-piloted spool designs for rapid response cycles
Standard NAMUR interface pads enable direct assembly on rotary actuators
Interchangeable AC and DC solenoid coils compliant with DIN 175301 standards
Integrated manual override buttons facilitate safe pneumatic circuit commissioning

BZO-Pneumatik KH Series industrial ball valves and actuators

BZO-Pneumatik KH Series ball valves are manufactured from nickel-plated brass and stainless alloys with full-bore fluid paths. The valves integrate with pneumatic quarter-turn actuators in double-acting or spring-return configurations for reliable automated shut-off.

Full-bore flow conduit minimizes hydrodynamic fluid pressure drop through valves
Two-way and three-way configurations with L-port and T-port flow distribution
Reinforced PTFE ball seat packings deliver bubble-tight bi-directional sealing
Standardized ISO 5211 top mounting flange for swift quarter-turn actuator mating

BZO-Pneumatik push-in fittings, safety couplings, and tubing

BZO-Pneumatik KSS Series push-in fittings and safety quick couplings ensure leak-free sealing across high-pressure pneumatic networks. Nickel-plated brass threads and internal hex sockets streamline rapid routing of calibrated polyurethane and polyamide pneumatic tubing.

Stainless steel gripping collet provides secure hold on polymer tubing walls
Internal hex drive socket enables dense cluster assembly on manifold blocks
Safety quick couplings with automated vent release prior to disconnect action
Calibrated polyurethane and polyamide tubing with high burst pressure rating

BZO-Pneumatik air preparation FRL units and safety valves

BZO-Pneumatik modular air preparation assemblies incorporate centrifugal filter-water separators, precision regulators, and lubricators to protect pneumatic cylinders. Two-hand safety valves in solid aluminum housings safeguard operators against accidental pinch hazards.

Sintered filter elements offering 5 and 20 micron particle filtration purity
Diaphragm pressure regulator with integrated dial gauge for steady setpoints
Two-hand safety control valves delivering 100 l/min air flow in aluminum body
Soft-start dump valves safeguard downstream actuators during system restart

Structural parameters and cushioning properties of ISO 15552 profile cylinders

BZO-Pneumatik ISO 15552 pneumatic profile cylinders are engineered for robust linear thrust across heavy factory automation environments. The high-rigidity cylinder body is extruded from hard-anodized aluminum profile featuring integrated slots for recessed magnetic proximity sensors.

A standout functional attribute is the precision adjustable pneumatic cushioning, which decelerates heavy piston assemblies before stroke completion to safeguard end caps against mechanical shock damage.

Hardened chrome-plated alloy steel rods paired with twin-lip polyurethane packings deliver reliable pressure containment up to 10 bar.

Miniature ISO 6432 round pneumatic cylinders in automated positioning mechanisms

Miniature round pneumatic cylinders from BZO-Pneumatik built to ISO 6432 specifications provide compact linear actuation for robotic grippers, automated packaging machinery, and high-speed electronics assembly lines.

The structural design features an austenitic stainless steel barrel with mechanically rolled end caps, ensuring tight pneumatic containment and high resistance against continuous machine vibration.

A permanent magnetic ring integrated into the piston allows non-contact sensors to track stroke limits at cycle velocities up to 1000 mm/s. Factory-applied polymer lubricants and wear-resistant sealing lips provide extended maintenance-free operation without external airline oiling.

Electropneumatic directional control valves and standard NAMUR sub-bases

BZO-Pneumatik electropneumatic directional control valves deliver dependable compressed air routing across machine tooling automation and conveyor sorting lines.

The portfolio encompasses monostable and bistable 3/2, 5/2, and 5/3 spool configurations actuated via electrical solenoids or external pneumatic pilot lines. Precision honed aluminum spool sleeves reduce kinetic friction, facilitating ultra-fast switching response times.

Standardized NAMUR mounting patterns enable direct bolt-on installation onto quarter-turn pneumatic actuators on butterfly and ball valves, eliminating intermediate tubing runs and potential leak points.

Full-bore KH Series industrial ball valves with pneumatic rotary actuators

Industrial ball valves from BZO-Pneumatik KH Series serve as dependable shut-off and diversion assemblies for compressed air, inert industrial gases, process water, and lubricating fluids.

Valve bodies are hot-pressed from nickel-plated brass or stainless alloys with full-bore internal conduits, preventing fluid turbulence and minimizing line pressure loss.

The valves couple directly with KHD Series pneumatic quarter-turn actuators in double-acting or spring-return formats via standardized ISO 5211 top flanges. Virgin PTFE ball seat seals preserve tight sealing integrity across temperatures from minus 20 to plus 150 degrees Celsius.

Push-in KSS Series fittings, safety quick couplings, and pneumatic tubing

BZO-Pneumatik KSS Series push-in fittings and safety couplings form a durable fluid connection network across modern automated facilities.

Metallic fitting components are precision machined from nickel-plated brass, with integrated internal hex sockets permitting dense cluster installation on tight valve manifolds.

High-grade stainless steel gripping collets clamp polymer tube walls firmly without constricting internal airflow during repetitive reconnect cycles. Automated safety quick-connect couplings vent downstream residual air pressure prior to disconnection, protecting personnel from whip hazards.

Modular air preparation FRL assemblies and dual-hand safety control valves

Modular air preparation FRL assemblies from BZO-Pneumatik provide comprehensive filtration, moisture removal, and pressure stabilization before compressed air enters pneumatic actuators.

Assemblies combine centrifugal moisture separator filters with porous 5 and 20 micron sintered elements, precision diaphragm pressure regulators with dial gauges, and micro-fog oil lubricators.

For machinery safety on pressing and clamping workstations, dedicated two-hand control valves rated for 100 l/min air throughput enforce simultaneous dual operator engagement, preventing accidental machine cycling during manual parts loading.

BZO-Pneumatik and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of BZO-Pneumatik and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.