BVALVE industrial and control valve solutions

Spanish industrial valves BVALVE: GS sliding gate control valves, 25065-66 bellows sealed globe valves, SAFEFLEX butterfly valves and safety relief systems.

BVALVE Flow Systems & Controls: industrial valves from Spain

Spanish engineering company Bvalve Flow Systems & Controls has manufactured heavy-duty control, bellows sealed and relief valves since 1996. The enterprise integrates advanced technical design, accredited calibration laboratories and modern assembly workshops in El Puig.

Advanced engineering base and high-pressure test benches up to 36 inches in Spain
Quality management system conforming strictly to international ISO 9001 norms
Full compliance with European PED 97/23 EC rules, ASME, API and ANSI standards
Precise selection of replacement bellows, plugs and seats by valve nameplate

BVALVE GS sliding gate control valves and globe control units

BVALVE GS1 and GS3 sliding gate control valves combine extremely accurate throttling with an ultra-light wafer body design. Sliding alloy plates deliver exceptional wear resistance when handling industrial steam, process gases and corrosive chemicals across plants.

Sliding plate technology cutting pneumatic stroke energy by up to eighty percent
Sizes spanning from DN 15 to DN 200 rated for ANSI 150/300/600 and DIN PN 40
Heavy-duty globe control valves built for severe service in thermal power plants
Equipped with compact pneumatic diaphragm actuators and smart digital positioners

BVALVE 25065-66 bellows sealed valves for steam and thermal fluids

Hermetic BVALVE 25065-66 bellows sealed globe valves are engineered for thermal oil, superheated steam and hazardous media. A welded bonnet design and multi-ply 1.4571 stainless bellows completely eliminate stem emissions into the surrounding factory atmosphere.

Multi-ply 1.4571 stainless steel bellows paired with pure graphite safety packing
Nominal bore sizes DN 15 to DN 300 rated for continuous working pressure PN 40
Durable valve bodies produced in carbon steel GS-C25 and stainless steel 1.4408
Throttling plug options with linear contour or soft Gylon seating up to 280 deg C

BVALVE and LESER safety relief valves to API 526 and DIN standards

The safety valve program by BVALVE and LESER comprises full-lift spring loaded valves for protecting industrial vessels and boilers. Fully qualified under API 526, ASME and DIN norms, these units span set pressure ratings from 0.1 to 700 bar across high-flow piping.

Full-lift instantaneous release safety valves series 441/442 up to DN 400 size
High-pressure specialty versions 455 to 459 accommodating settings up to 700 bar
Clean Service models without dead spaces tailored for pharmaceutical processing
Changeover valve assemblies 310/311 allowing dual valve maintenance on line

SAFEFLEX KX triple eccentric butterfly valves and forged ball valves

SAFEFLEX KX triple eccentric butterfly valves deliver bi-directional bubble-tight shutoff to rate A under severe duty conditions. The mechanical metal seal design eliminates friction during stroke rotation, prolonging operational life across petrochemical energy plants.

Triple offset geometry preventing friction wear along sealing contact edges
Wafer, lugged and double flanged housing styles built to EN 558 and API 609
Starline forged steel ball valves designed for high pressure demanding media
Operating temperature range from cryogenic conditions up to plus 550 deg C

BVALVE replacement components, bellows cartridges and repair kits

To maintain continuous operation across flow systems, BVALVE supplies dedicated bellows repair sets, replacement plugs, graphite packings and actuator diaphragms. Prompt technical selection by serial nameplate restores factory sealing performance without downtime.

Replacement 1.4571 multi-ply bellows assemblies and precision profiling plugs
High-density sealing ring sets made from pure graphite and heavy-duty Gylon
Pneumatic actuator repair kits including durable diaphragms and return springs
LESER safety valve replacement trim components, calibrated springs and discs

Spanish engineering heritage and manufacturing facilities of BVALVE in Valencia

Spanish engineering company Bvalve Flow Systems & Controls has developed robust fluid control valves for industrial pipelines since 1996.

The central manufacturing campus in El Puig covers 1,800 square meters of technical offices and 4,400 square meters of assembly workshops, incorporating an accredited calibration facility and flow test equipment.

BVALVE engineers fluid handling units for chemical, power generation, refining and pharmaceutical plants. Factory production conforms to ISO 9001 quality management guidelines and the European Pressure Equipment Directive PED 97/23 EC.

Strategic warehouse reserves in Spain ensure rapid assembly and dispatch of standardized industrial valves and components.

BVALVE GS sliding gate control valves and severe duty globe units

BVALVE GS1 and GS3 sliding gate control valves utilize two sliding plates with precision-machined metering orifices that slide across each other. The tungsten carbide and stainless alloy plates provide exceptional wear resistance with equal percentage or linear throttling contours.

The compact wafer housing weighs significantly less than traditional globe valves.

GS control valves provide optimal regulation for steam, gases and aggressive chemicals across industrial process piping. For power station boiler feeds, BVALVE offers balanced globe control valves with multi-stage anti-cavitation trim.

Actuation options include multi-spring pneumatic diaphragm actuators and digital positioners communicating via HART protocols.

BVALVE 25065-66 bellows sealed valves for high temperature steam and thermal oil

BVALVE 25065-66 bellows sealed globe valves are purpose-built for thermal oil loops, steam distribution and toxic process media.

The core assembly features a multi-ply stainless steel 1.4571 bellows welded to the bonnet, isolating the moving stem from line fluids and eliminating atmospheric fugitive emissions common with standard gland packings.

The welded bonnet architecture ensures full joint integrity under thermal cycles up to 450 degrees Celsius. Valve bodies are manufactured from carbon steel GS-C25 and stainless steel 1.4408.

BVALVE fits these valves with linear regulating plugs for flow balancing, supported by pure graphite secondary packings and optional Gylon soft seating inserts.

BVALVE and LESER safety relief valves to API 526, ASME and DIN standards

In partnership with LESER, BVALVE provides full-lift spring loaded and pilot operated safety relief valves for industrial pressure vessels and boilers.

Fully qualified under API 526, ASME Section VIII and DIN standards, these units accommodate set relief pressures from 0.1 to 700 bar, safely releasing excessive volume during thermal or operational overpressure events.

Corrosive chemical duties utilize wetted components machined from Hastelloy, Duplex and nickel alloys. Clean Service designs feature dead-leg-free geometries tailored for pharmaceutical and food production.

Furthermore, BVALVE supplies 310/311 changeover valve systems enabling safe online maintenance of dual safety valves without shutting down live plant units.

SAFEFLEX KX triple eccentric butterfly valves and forged steel ball valves

SAFEFLEX KX triple eccentric butterfly valves are engineered for zero-leakage shutoff under demanding thermal and mechanical pressures. The triple offset shaft configuration eliminates rubbing between disc and seat ring during operation: metal-to-metal contact occurs only at final closure.

This geometry prevents seat wear and extends operating lifespans across plants.

SAFEFLEX KX valves deliver bi-directional tightness to Class A and satisfy Fire-Safe standards under API 607. Housing styles comprise wafer, lugged and double-flanged bodies up to DN 1200 dimensions.

For high-pressure isolation lines, the portfolio also incorporates Starline forged ball valves capable of handling volatile hydrocarbons and cryogenic fluids.

Maintenance guidelines, replacement trim parts and bellows repair kits BVALVE

To maintain design performance throughout the lifecycle of BVALVE installations, routine inspection and timely refurbishment of wear components are recommended.

Factory service kits include multi-ply stainless steel bellows cartridges, regulating plugs, precision seat rings, pure graphite packing sets and spiral wound gaskets matched to original tolerances.

Selection of parts is handled by technical specialists using the stamped nameplate data along with fluid parameters and pressure differentials.

For pneumatic actuators, replacement fabric-reinforced rubber diaphragms, return springs, NAMUR solenoid valves and limit switches are supplied, restoring factory sealing integrity across flow networks.

BVALVE and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of BVALVE and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.