KPA sanitary centrifugal pumps and hygienic processing equipment

Hygienic pumping solutions by KPA (Germany): KyNX sanitary centrifugal pumps, KyNX Hybrid modular units, and CPR6 heavy-duty process pump assemblies.

KPA: sanitary pumps and hygienic fluid handling solutions

Kyffhäuser Pumpen Artern GmbH (KPA) has engineered precision stainless steel hygienic pumps since 1958. The German manufacturing plant produces dependable pumping assemblies for food, pharmaceutical, and chemical industries adhering to strict European standards.

More than six decades of dedicated pump engineering and manufacturing experience
Electropolished fluid end fabricated from AISI 316L stainless steel for hygiene
Full compliance with strict international sanitary guidelines and cleanroom norms
Technical selection of pumping units, factory-grade seal assemblies, and spare parts

KPA KyNX series sanitary centrifugal pumps

The flagship KyNX pump line is engineered for gentle fluid transfer within sterile processing operations. Optimized impeller geometry delivers smooth non-cavitating flow patterns, protecting delicate medium integrity across food, beverage, and biotech applications.

Electropolished AISI 316L chrome-nickel-moly steel with surface finish of 0.001 mm
Dead-end free internal volute geometry facilitating prompt CIP and SIP sanitization
Single and flushed double mechanical shaft seals cooled directly by working fluid
Sanitary connection fittings per DIN 11851, SMS, Clamp, and hygienic adaptors

KyNX Hybrid modular sanitary centrifugal pumps

The innovative KyNX Hybrid platform merges hygienic performance with modular quick-disassembly mechanics. A patented swift mechanical seal replacement mechanism reduces routine maintenance downtime to mere minutes across busy modern industrial production facilities.

Dedicated modular architecture supporting rapid replacement of mechanical seals
Universal shaft interface enabling quick transitions between seal configurations
Elevated machinery availability during round-the-clock industrial run cycles
Measurable reduction in long-term maintenance overhead across sanitary lines

KPA CPR6 heavy-duty industrial process pumps

The CPR6 pump line is designed for elevated head pressures and demanding technological liquids. A reinforced housing and robust bearing pedestal ensure dependable flow when transferring viscous recipes, sugar concentrates, and hot fluids across processing plants.

High volumetric throughput and head capability for large industrial facilities
Reinforced corrosion-resistant steel housing tailored for high line pressures
Effective transfer of media featuring elevated viscosity, density, or heat
Dependable coupling connection to standardized international IEC motor units

Compact KPA KM2 block pumps and KN model range

The KM2 close-coupled pump family and unified KN2, KN3, and KN4 configurations span a power spectrum from 0.25 kW up to 30 kW. Compact footprints facilitate clean integration within tight spaces, process skids, and pharmaceutical WFI water purification systems.

Comprehensive drive ratings from 0.25 kW to 30 kW covering various flow demands
Compact close-coupled layout for streamlined skid mounting and module frames
Unified 25 mm shaft seal diameter across KN2, KN3, KN4, and S1 pump frames
Direct compatibility with modern variable frequency drives for speed control

Components and maintenance wear parts for KPA pumps

To maintain uninterrupted uptime across KPA pumping systems, a complete selection of wear components is provided: precision mechanical seals, elastomer O-rings, impellers, shafts, and bearings. Exact dimensional tolerances ensure seamless fit and prolonged operational life.

Single and flushed mechanical shaft seals with silicon carbide and carbon faces
Sanitary elastomer O-rings in EPDM, FKM, and PTFE compliant with FDA benchmarks
Dynamically balanced stainless steel impellers fabricated from AISI 316L alloy
Precise identification of replacement parts via equipment nameplate and serial

KPA engineering heritage and German hygienic manufacturing benchmarks

German machinery manufacturer Kyffhäuser Pumpen Artern GmbH (KPA) traces its manufacturing origins to 1958 in the Thuringian town of Artern.

Across more than six decades of technical operation, the enterprise has specialized in developing high-purity fluid pumps for dairy, food, pharmaceutical, and biotechnology facilities worldwide.

The manufacturing philosophy rests on strict adherence to European standards governing clean hygiene, operational reliability, and energy efficiency.

Utilization of high-grade stainless alloys, precision electropolishing, and tight assembly tolerances delivers dependable performance throughout continuous industrial shifts.

KyNX sanitary centrifugal pumps for shear-sensitive fluid processing

The flagship KyNX sanitary pump line is tailored specifically for media sensitive to mechanical shear and fluid turbulence.

Unique hydraulic volute contouring and optimized geometry of closed or semi-open impellers ensure smooth laminar flow without compromising the delicate consistency of dairy products, fruit extracts, or biotech solutions.

Fluid-contacting components are precision-formed from forged AISI 316L chrome-nickel-molybdenum alloy subjected to electropolishing, eliminating surface micro-porosity where residues might accumulate.

The absence of internal dead zones streamlines automated CIP sanitization routines and SIP thermal steam cycles directly within plant piping.

KyNX Hybrid modular pumps supporting rapid on-site maintenance routines

The KyNX Hybrid series represents an engineering breakthrough aimed at curtailing scheduled downtime in processing facilities.

A modular architecture permits rapid replacement of mechanical shaft seals right on the production floor in a matter of minutes, without requiring full pump disassembly from the processing pipeline.

A standardized seal mounting interface allows rapid transitions between single and flushed double mechanical seal arrangements as media properties or thermal parameters change.

This capability maximizes machinery availability and reduces the operational expenditure associated with periodic seal maintenance.

CPR6 heavy-duty process pumps engineered for viscous and elevated-temperature fluids

KPA CPR6 heavy-duty process pumps are built to master demanding operational loads, elevated line pressures, and high-density technological fluids.

A reinforced stainless steel housing withstands significant hydraulic stresses, while a rigid bearing pedestal preserves shaft alignment when handling thick sugar syrups, oils, and purées.

CPR6 units are widely implemented in high-temperature media transfer, high-volume CIP rinsing stations, evaporators, and distillation columns.

Connection to electric drive units is achieved through durable flexible couplings, providing drive interchangeability and streamlining maintenance across plants operating IEC standard motors.

Unified power ratings of KM2 block units and standardized KN2-KN4 configurations

Close-coupled KM2 pump assemblies along with modular KN2, KN3, KN4, and S1 configurations span an expansive power band from 0.25 kW up to 30 kW, enabling precise hydraulic matching for distinct production processes.

Compact close-coupled profiles make these units well-suited for integration onto modular process skids and WFI modules.

A key operational benefit lies in thorough component standardization: all models from KN2 through S1 share an identical 25 mm shaft seal mounting diameter.

This uniform sizing simplifies spare parts stocking, narrows the inventory of backup consumables, and prevents installation mistakes by plant maintenance personnel.

Technical selection guidelines for KPA replacement seals, impellers, and components

To maintain target hydraulic throughput and prevent unplanned interruptions, KPA recommends regular preventative inspection of key wear parts.

Single and flushed mechanical seal pairs fabricated from silicon carbide, tungsten carbide, and specialized carbon are selected to match the chemical aggressiveness of handled liquids.

Sanitary O-rings and elastomeric gaskets are supplied in compliant EPDM, FKM, and PTFE formulations aligned with international food contact standards.

Correct replacement components, impellers, and shafts are verified by referencing pump nameplate details and factory serial records to ensure exact geometric fit.

KPA and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of KPA and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.