Neway Oil Equipment API 6A wellheads, Christmas trees, BOPs and frac valves

Supply API 6A wellhead assemblies, Christmas trees up to 20,000 psi, API 16A blowout preventers, fracturing manifolds, FC/FLS slab gate valves, chokes and genuine OEM spare parts from Neway Oil Equipment.

Neway API 6A Production & Injection Christmas Trees (2,000–20,000 psi)

Neway Oil Equipment engineers and manufactures API Spec 6A (PSL 1 to PSL 4, PR1/PR2) Christmas trees and water/gas injection trees for onshore, offshore platform, desert and Arctic oil and gas fields rated from 2,000 psi up to 20,000 psi.

Single-wing, dual-wing, dual-completion and compact solid-block Christmas tree configurations
Material classes AA through HH including full CRA Inconel 625 cladding for severe H2S/CO2 sour service
Temperature ratings from K/L (-60 °C) Arctic service to P/U/V/X (+180 °C) thermal recovery wells
Spare parts: master/wing/swab gate valves, tree caps, tees, crosses, chokes, RX/BX ring gaskets

Neway Wellhead Systems, Tubing Spools & Multibowl Assemblies

Neway Oil Equipment supplies conventional spooled wellhead assemblies, casing head housings, tubing heads and time-saving compact multibowl wellhead systems engineered to API 6A.

Slip-type and mandrel-type pipe hangers with energized elastomer or metal-to-metal pack-off seals
Tubing hangers with continuous control-line feedthroughs for subsurface safety valves (SCSSV) and ESP cables
Compact multibowl wellhead housings allowing BOP installation without removing the stack between strings
Spare parts: slip/mandrel hangers, secondary pack-off seals, wear bushings, test plugs, VR plugs

Neway API 16A Blowout Preventers (BOP) and API 16C Choke & Kill Manifolds

Neway Oil Equipment manufactures drilling pressure-control equipment certified to API Spec 16A and API Spec 16C, including single/double ram BOPs, annular BOPs, drilling spools and high-pressure choke and kill manifolds.

Single, double and triple ram blowout preventers equipped with pipe, blind, variable-bore and shear rams
5,000 to 15,000 psi Choke & Kill manifolds with hydraulic/manual adjustable chokes and buffer chambers
BOP hydraulic accumulator control units, driller remote control panels and high-pressure manifold skid packages
Spare parts: ram blocks, top/front ram packer rubbers, annular BOP packing units, bonnet seal kits

Neway Surface Well Testing Flowheads, Choke Manifolds and Desanders

Neway Oil Equipment provides modular surface well testing, flowback and clean-up packages rated up to 15,000 psi for exploration appraisal and post-fracturing well commissioning.

4-valve and 5-valve Surface Test Trees (Flowheads) with heavy-duty swivels and fail-safe ESD actuators
5-valve dual-flowpath well testing choke manifolds with positive and adjustable tungsten-carbide chokes
High-pressure dual-pot sand traps (desanders), plug catchers, emergency shutdown valves (ESDV) and data headers
Spare parts: carbide choke beans and stems, swivel packing kits, gate & seat assemblies, hammer unions

Neway High-Pressure Fracturing Trees, Frac Valves and Zipper Manifolds

Neway Oil Equipment designs heavy-duty hydraulic fracturing trees, large-bore frac gate valves and multi-well Zipper manifolds rated up to 15,000 and 20,000 psi for unconventional shale oil and tight gas stimulation.

Large-bore 4-1/16", 5-1/8" and 7-1/16" manual and hydraulic frac valves engineered for heavy proppant slurry
Special tungsten-carbide hardfacing and Isolation Sleeve geometry protect seal areas from sand erosion
Skid-mounted Zipper Frac manifolds and Missile trailers enabling rapid stage switching across multi-well pads
Spare parts: HVOF-coated frac gates and seats, U-cup stem packings, body grease fittings, hydraulic cylinder kits

Neway API 6A Surface Safety Valve (SSV) Actuators and Wellhead Control Panels

Neway Oil Equipment manufactures pneumatic diaphragm, pneumatic piston and hydraulic spring-return actuators for Surface Safety Valves (SSV), Boarding Shutdown Valves (BDSV) and Underwater Safety Valves (USV), paired with multi-well control panels.

Fail-safe spring-return closure under zero wellhead pressure or full working pressure differentials
Quick-disconnect bonnet designs allowing actuator maintenance without depressurizing the valve body
Single-well and multi-well Wellhead Control Panels (WHCP) with Hi-Lo pressure pilots,ESD loops and solar power
Spare parts: actuator stem seal cartridges, diaphragm plates, hydraulic piston seals, Hi-Lo pilot valves

Neway API 6A Slab Gate Valves (FC, FLS, FLS-R), Expanding Gate & Mud Valves

Neway Oil Equipment produces a full lineup of API 6A through-conduit slab gate valves (Models FC, FLS, FLS-R), mechanical expanding-gate valves and abrasive-service Mud Gate Valves for standpipe manifolds.

Bi-directional metal-to-metal gate-to-seat and seat-to-body sealing with backseat stem isolation under pressure
FLS-R balanced lower-stem design and heavy thrust bearings minimize operating torque at 15,000–20,000 psi
5,000 and 7,500 psi Mud Gate Valves with resilient elastomer-bonded seat inserts for drilling mud lines
Spare parts: gate-and-seat kits, stems, shear pins, stem lip seals, body grease fittings, handwheels

Neway API 6A Adjustable/Positive Choke Valves, Plug Valves & Check Valves

Neway Oil Equipment manufactures API 6A needle-and-seat adjustable chokes, external-sleeve cage chokes, positive bean chokes, high-pressure plug valves and swing/piston check valves for wellhead flow control.

Solid tungsten-carbide needle, plug, cage and seat liners resist severe sand erosion and flashing
Convertible bonnet bodies allow field conversion between positive bean chokes and adjustable needle chokes
10,000 and 15,000 psi quarter-turn plug valves for cementing, acidizing and manifold isolation lines
Spare parts: tungsten-carbide trim sets, positive flow beans, bean wrenches, plug valve insert kits

Wellhead & oilfield equipment identification by Neway Oil Equipment nameplate

Neway Oil Equipment (Suzhou) Co., Ltd. (NOE) is the upstream oil and gas equipment division of Neway Group, holding official API Spec 6A, API Spec 16A and API Spec 16C monogram licenses.

To request replacement equipment or genuine OEM spare parts, provide the nameplate Serial Number, nominal bore size (2-1/16" to 21-1/4"), working pressure (2,000–20,000 psi), API 6A material class (AA–HH), temperature rating (K–V) and Product Specification Level (PSL 1–4, PR1/PR2).

Cross-referencing the factory General Assembly drawing guarantees exact mechanical compatibility of hangers, pack-offs, gates, seats and seal kits.

API 6A Christmas trees, wellhead spools and multibowl systems

NOE designs single-wing, dual-wing and solid-block Christmas trees alongside conventional spooled wellheads and time-saving compact multibowl wellhead systems.

Slip and mandrel pipe/tubing hangers are available with energized elastomer or metal-to-metal neck seals and continuous control-line feedthroughs for SCSSV and ESP completions.

We supply master/wing/swab gate valves, tree caps, slip/mandrel hangers, secondary pack-offs, wear bushings, test plugs and RX/BX ring gaskets.

API 16A ram & annular blowout preventers (BOP) and API 16C manifolds

For drilling and workover rigs, NOE manufactures single and double ram BOPs, spherical/conical annular BOPs, drilling spools and 5,000–15,000 psi Choke & Kill and standpipe manifolds.

Hydraulic side-door locking systems enable rapid ram changeouts between pipe, variable-bore, blind and shear rams.

We provide complete ram block assemblies, top and front packer rubbers, annular packing elements, bonnet seal kits and hydraulic accumulator unit parts.

Surface well testing flowheads, dual choke manifolds and desanders

NOE surface well testing packages support high-pressure exploration testing, post-frac flowback and well clean-up up to 15,000 psi.

Packages include 4-valve and 5-valve Surface Test Trees (Flowheads) with integral swivels, dual-flowpath choke manifolds and dual-vessel cyclonic/screen sand traps (desanders).

We supply tungsten-carbide choke beans and stems, swivel seal kits, emergency shutdown valves (ESDV) and high-pressure hammer unions.

15,000 & 20,000 psi hydraulic fracturing trees and Zipper manifolds

Engineered for high-rate multi-stage shale fracturing, NOE frac trees, large-bore frac valves (4-1/16", 5-1/8", 7-1/16") and multi-well Zipper manifolds withstand extreme proppant erosion.

HVOF tungsten-carbide hardfacing and isolation sleeve designs keep abrasive sand out of the body cavity during pumping stages.

We deliver replacement frac gates and seats, high-pressure stem U-packings, grease injection fittings and hydraulic actuator repair kits.

API 6A slab gate valves (FC, FLS, FLS-R), mud valves and chokes

NOE manufactures through-conduit slab gate valves (FC, FLS, FLS-R with lower balancing stem), mechanical expanding-gate valves, 5,000/7,500 psi Mud Gate Valves, plug valves and adjustable/positive chokes.

All critical trims feature Stellite 6 or solid tungsten-carbide wear surfaces and bi-directional metal-to-metal sealing.

We supply gate-and-seat kits, stems, thrust bearings, lip seals, solid carbide choke trim sets, positive flow beans and plug valve repair kits.

Surface Safety Valve (SSV) actuators and Wellhead Control Panels (WHCP)

NOE pneumatic diaphragm, pneumatic piston and hydraulic spring-return actuators provide fail-safe closure for Surface Safety Valves (SSV) and Boarding Shutdown Valves (BDSV).

Single-well and multi-well stainless steel Wellhead Control Panels (WHCP) integrate hydraulic pumps, accumulators, Hi-Lo pressure pilots, fusible fire loops and ESD interfaces.

We supply actuator stem seal cartridges, diaphragm plates, piston seals, Hi-Lo pilots and quick-exhaust valves.

Inconel 625 CRA cladding and API 6A PR2 environmental qualification

For sour gas fields containing high H2S and CO2 (NACE MR0175 / ISO 15156 Class FF/HH), NOE performs automated GTAW Inconel 625 weld overlay across all wetted bores and ring grooves.

In-house testing bunkers validate equipment with nitrogen/helium gas testing up to 30,000 psi and thermal cycling from -60 °C to +180 °C per API 6A PR2.

Full PSL 3 / PSL 3G / PSL 4 traceability and third-party witness certificates are provided.

Turnkey oilfield supply, export logistics and 2-year rig/wellhead spares

We coordinate global procurement and delivery of complete Neway Oil Equipment wellheads, Christmas trees, BOP stacks, fracturing manifolds and OEM spare parts.

Our team prepares 2-year operational spare parts packages for remote onshore pads and offshore platforms.

Send your wellhead schematic, API datasheet or nameplate details to receive a comprehensive technical and commercial offer.

Specifications, lead times and pricing for Neway Oil Equipment systems and spare parts are calculated individually upon commercial request. Scope of supply, PR2/PSL certification and delivery terms are defined in the contract.