Industrial Metering Pumps & Process Pumping Systems
Bran+Luebbe Metering Pumps & High-Pressure Process Diaphragm Pumps
Direct supply of genuine Bran+Luebbe diaphragm and plunger metering pumps: NOVADOS series, compact ProCam units, ProCam Sanitary hygienic pumps, NOVAPLEX high-pressure process pumps, and API 675 CEREX metering pumps.
Bran+Luebbe Pump Product Portfolio
API 675 metering pumps, high-pressure process diaphragm pumps, and genuine spare parts by Bran+Luebbe (SPX FLOW).
Bran+Luebbe NOVADOS Metering Pumps
The Bran+Luebbe NOVADOS series offers heavy-duty, modular metering pumps engineered in full compliance with the API 675 standard. Spanning sizes from H1 to H6 and multi-crank configurations, NOVADOS handles flow rates from 0.1 l/h to over 40,000 l/h at operational pressures up to 1,000 bar.
Equipped with either double PTFE diaphragm heads or precision plunger heads, the positive diaphragm position control (PDPC) system ensures superior metering accuracy within ±0.5%.
Multi-stream multiplex configurations allow up to 12 distinct liquid heads to operate synchronously off a single drive motor.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe ProCam Smart & Compact Dosing Pumps
The Bran+Luebbe ProCam series (comprising ProCam Smart, Compact, and DS models) delivers an economical yet robust metering solution for water treatment, industrial cleaning, and chemical feed.
Utilizing mechanically actuated PTFE double diaphragms with integrated leak detection, ProCam delivers flow rates up to 500 l/h at pressures up to 20 bar. Its compact worm gear drive and intuitive stroke adjustment dial provide long-term reliability and straightforward servicing.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe ProCam Sanitary Hygienic Pumps
Bran+Luebbe ProCam Sanitary metering pumps are dedicated hygienic dosing solutions tailored for food, beverage, cosmetics, and biotechnology.
Featuring electro-polished 316L stainless steel wet-ends with surface roughness Ra < 0.8 μm and free of dead zones, they comply with EHEDG, FDA, and 3-A sanitary requirements. The pumps fully withstand Clean-in-Place (CIP) and Steam-in-Place (SIP) thermal regimes up to 140 °C.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe NOVAPLEX Process Diaphragm Pumps
The Bran+Luebbe NOVAPLEX series (Integral and Vector configurations) represents high-performance triplex process diaphragm pumps built for demanding oil & gas, petrochemical, and hydrometallurgical applications.
Delivering discharge pressures up to 1,000 bar (15,000 psi) and flow capacities exceeding 55 m³/h (245 GPM), NOVAPLEX integrates internal reduction gearing with hermetically sealed, leak-free diaphragm technology to pump toxic, hazardous, and abrasive fluids with absolute environmental isolation.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe CEREX Hydraulic Diaphragm Pumps
Bran+Luebbe CEREX pumps (models CEREX P, K, and D) provide a rugged, cost-effective API 675 compliant metering solution.
Featuring hydraulically actuated double PTFE diaphragms with integrated internal pressure relief and refill valves, CEREX delivers flow rates from 1 to 6,000 l/h at pressures up to 250 bar.
Its enclosed oil-bath power end ensures reliable 24/7 continuous operation in aggressive industrial environments.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe High-Pressure Plunger Pumpheads
Bran+Luebbe plunger pumpheads are engineered for high-precision chemical dosing of clean, non-abrasive fluids at extreme pressures up to 1,000 bar.
Pistons are manufactured from high-grade stainless steel with ceramic coatings or solid zirconium/aluminum oxide ceramics to deliver extreme wear resistance. Packed glands include flushing and cooling lantern rings to eliminate crystallization and fugitive emissions.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe Suction & Discharge Check Valves
Bran+Luebbe suction and discharge check valves are critical precision components governing pump volumetric efficiency and metering repeatability.
Available in single-ball, double-ball, spring-loaded poppet, and cone-seat designs, valve balls and seats are precision-lapped from 316Ti, tungsten carbide, ceramic oxide, and Hastelloy C to guarantee bubble-tight shutoff under heavy cycling up to 200 strokes/min.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Bran+Luebbe Spare Parts & Diaphragm Kits
Original Bran+Luebbe Preventive Maintenance (PM) and overhaul spare kits are tailored to ensure continuous operation across industrial pump installations.
All structural wet-end, sensor, and mechanical drive elements are precision engineered for severe continuous industrial duty under heavy cyclic hydraulic loads, guaranteeing long-term volumetric repeatability, zero leakage, and absolute process safety.
Our applications team calculates hydraulic sizing according to required flow rates, discharge pressure, viscosity, and chemical aggression.
We select optimal wet-end materials (316Ti, Duplex, Hastelloy, Titanium, PVDF, PTFE) and multiplex head configurations to safely handle hazardous and corrosive process streams under continuous industrial operations across chemical processing complexes.
Genuine Spare Parts & Service Kits
We supply genuine multi-layer PTFE double diaphragms with rupture detection, solid ceramic plungers, tungsten carbide valve assemblies, and complete preventive maintenance overhaul kits to ensure maximum plant uptime, operational safety, and full compliance with original manufacturing specifications throughout multi-year field service.
Industrial Applications of Bran+Luebbe Pumps
Bran+Luebbe metering pumps operate across chemical synthesis, refining, oil & gas production, municipal water purification, and pharmaceutical manufacturing.
High volumetric accuracy within ±0.5% and pressures up to 1,000 bar deliver dependable chemical dosing for scale inhibitors, acids, and catalysts.
ProCam Sanitary units comply with EHEDG, FDA, and 3-A standards for Clean-in-Place (CIP) food and beverage processing.
Design Superiority & API 675 Compliance
Positive Diaphragm Position Control (PDPC) protects diaphragms against hydraulic pressure transients and system upsets.
NOVADOS modular multiplexing allows up to 12 distinct metering streams driven by a single motor.
Hermetically sealed leak-free heads ensure zero fugitive emissions of toxic and hazardous chemicals.
Advanced Wet-End Metallurgy and Corrosion Resistance
Liquid-contact materials include AISI 316Ti, Duplex alloys, Hastelloy C-276, Titanium Gr.2, and virgin PTFE/PVDF polymers.
Precision machining and polishing eliminate micro-voids, ensuring exceptional fatigue endurance under cyclic hydraulic loading.
Every pumphead undergoes rigorous hydrostatic testing at 1.5 times rated working pressure prior to dispatch.
Preventive Maintenance and Lifecycle Reliability
Routine servicing includes drive gear inspection, check valve reseating, and diaphragm integrity monitoring via optical or pressure switches.
Pre-packaged Preventive Maintenance Kits streamline turnaround times during planned plant shutdowns.
Direct procurement channels guarantee full part authenticity, serial number traceability, and factory warranty backing.
Automation Integration and Smart Flow Modulation
Electric stroke length actuators feature 4-20 mA analogue feedback loops, Profibus DP, and Modbus RTU communications.
Variable frequency drive integration extends operational turndown ratio up to 1:100 without compromising volumetric repeatability.
Integrated hydraulic pressure monitoring sensors provide fail-safe automatic trip interlocking during piping blockage.
Explosion-Proof Certification and Safety Engineering
Pump assemblies are supplied in ATEX certified configurations (Zone 1, Zone 2 / Ex d, Ex e) for hazardous fluid handling.
Materials and wetted components comply with NACE MR0175 standards for sour gas and high H2S service.
Internal hydraulic relief valves with manual reset mechanisms protect downstream piping against overpressurization.
Equipment and spare parts are delivered with complete factory test reports, material certificates, and international logistics support.
