Equipment and spare partsBrowse manufacturers Search by manufacturerSend your requirementsorder@equipguo.comA photo or a brief description
Call or message us+86 130 1429 3091
Equipment and spare partsBrowse manufacturers Search by manufacturerDirect engineering supply of heavy-duty industrial coolant pumps manufactured by Brinkmann Pumpen GmbH & Co. KG for CNC machine tools, machining centers, precision grinding lines, EDM units, and coolant recycling plants. Comprehensive range of centrifugal immersion pumps, high-pressure screw spindle pumps, chip cutter pumps, and de-aeration systems.
We supply the full range of Brinkmann TC, STC, TL, and STL series immersion centrifugal pumps engineered for water-soluble cutting fluids, grinding emulsions, and light mineral oils. Directly mounted onto machine tool coolant tank covers, these pumps feature immersion depths ranging from 150 to 580 mm. Semi-open impellers cast in wear-resistant brass or grey cast iron enable uninhibited passage of fine metal swarf and grinding fines without risk of clogging. Heavy-duty STL and STC configurations incorporate reinforced shaft sleeve bushings and extended-life bearing cartridges specifically optimized for 24/7 duty cycles on CNC turning and milling machining centers.
Genuine Brinkmann three-screw positive displacement spindle pumps from the BFS, TFS, and FFS series are engineered specifically for high-pressure through-spindle coolant delivery (TSC / IKZ) on modern machine tools. Delivering operating pressures up to 150–200 bar, these units ensure rapid chip evacuation during deep-hole gun drilling and high-speed milling of heat-resistant superalloys. The hydraulic assembly comprises nitrided and case-hardened alloy steel screws rotating within replaceable wear-resistant casing inserts. This design guarantees virtually pulsation-free laminar flow, whisper-quiet acoustic operation, and extended service life of the balanced silicon carbide (SiC/SiC) mechanical face seals.
Brinkmann TA, TE, STA, and STE series miniature immersion pumps are engineered for compact machine tools, benchtop mills, CNC lathes, metal band saws, tool grinders, and wire EDM installations. Featuring ultra-compact mounting flanges, these pumps integrate seamlessly into small-footprint coolant tanks and restricted enclosures. Hydraulic impellers are molded from reinforced PBT polymer or machined from brass, ensuring chemical compatibility with water-miscible emulsions, dielectric fluids, and rinsing water. Low-loss electric drive motors minimize thermal transfer into the coolant reservoir, maintaining thermal stability across sensitive machining processes.
Brinkmann FH, TH, and TB series multistage immersion centrifugal pumps feature closed stainless steel or high-tensile bronze impellers coupled with precision guide-vane diffusers. Designed to generate delivery pressures up to 25–40 bar, these units feed coolants on cylindrical and creep-feed grinding machines, gear hobbers, CNC multi-axis turning centers, and deep-hole drilling rigs. Closed impeller geometry maximizes hydraulic efficiency, maintains rock-solid pressure stability across complex tooling manifolds, and minimizes thermal dissipation into the fluid, preserving sub-micron dimensional precision on tight-tolerance workpieces.
Specialized Brinkmann immersion pumps from the SFC, SX, and SXC series incorporate a heavy-duty tungsten carbide rotary shredding mechanism positioned directly at the suction intake. Engineered for coolant circuits loaded with continuous, stringy, or curly chips from aluminum alloys, brass, bronze, and soft steels, the hardened cutting blades grind metal swarf into manageable millimeter-sized fragments directly within the fluid stream. This prevents blockages across return lines, protects downstream check valves, and enables fluid-borne chip transport to centralized recycling and filtration skids without bulky mechanical augers.
Brinkmann's patented SGL, SFL, and SAL series de-aeration immersion pumps resolve the persistent industrial challenge of handling highly foamy, air-entrained coolants and grinding slurries. During high-velocity machining, coolants can entrap up to 30–40% air, causing conventional pumps to suffer severe cavitation, air-locking, and pressure loss. The Brinkmann SGL incorporates an internal de-aeration chamber that separates air bubbles and foam from the coolant matrix, venting air back to the tank while delivering a solid, non-aerated fluid stream. The SAL series also features immediate self-priming capability during rapid fluid level drops, safeguarding against dry running.
Brinkmann KTF, KC, and KTB heavy-duty immersion sludge pumps are designed to convey heavily contaminated cutting fluids loaded with dense grinding swarf, graphite fines, scale, abrasive particulates, and process sediments. Outfitted with recessed semi-open Vortex impellers with generous internal clearances, these pumps effortlessly pass solid inclusions up to 15–20 mm in diameter without jamming. Pump casings are cast in abrasion-resistant alloyed grey iron or ductile nodular cast iron (GGG), delivering unmatched hydraulic lifespan against intense abrasive slurry wear.
Brinkmann SBA, SBG, and SBB series horizontal end-suction centrifugal pumps are engineered for dry installation adjacent to coolant tanks, parts cleaning machines, water treatment skids, and industrial chiller circuits. Mounted on heavy-duty baseplates or wall brackets, these units provide immediate maintenance access without removing tank covers. The hydraulic components are available in grey cast iron, corrosion-resistant bronze, or AISI 316 stainless steel, enabling reliable circulation of neutral coolants, hot alkaline washing baths, degreasing solvents, and demineralized rinse water at media temperatures up to +90 °C.
We supply the complete catalog of genuine Brinkmann Pumpen replacement parts and overhaul kits for scheduled maintenance and complete rebuilding of all industrial pump series. Components are identified strictly by pump serial number and nameplate code, ensuring 100% geometric fit and restoration of original factory hydraulic efficiency. Our inventory includes precision mechanical face seals in SiC/SiC and TC/TC with FKM (Viton) elastomers, dynamically balanced impellers in brass, cast iron, and stainless steel, precision-ground pump shafts, high-load bearings, flexible drive couplings, and replacement screw spindle sets for BFS/TFS high-pressure units.
Our technical specialists analyze machine hydraulic schematics, operating media (water-soluble emulsions, synthetic coolants, neat cutting oils), kinematic viscosity, chip load, required delivery pressure, and tank immersion depth to specify the exact pump configuration or high-efficiency retrofit.
Brinkmann Pumps units are factory-fitted and field-proven across leading machine tool platforms including DMG MORI, Mazak, Chiron, Hermle, Heller, Emag, and Studer, delivering exceptional operational reliability in continuous 24/7 industrial manufacturing cycles.
Brinkmann's advanced fluid dynamics geometry maximizes hydraulic efficiency while minimizing thermal transfer into the cutting fluid. Powered by IE3/IE4 premium efficiency motors and certified under ISO 9001 and CE, each unit undergoes comprehensive factory pressure and flow testing.
All Brinkmann Pumps equipment and spare parts are shipped in factory-sealed industrial packaging with manufacturer test certificates. We provide an official 12-month warranty, ongoing technical support, and express delivery of original mechanical seals, impellers, bearings, and screw sets.
English-speaking contact