Axisflying UAV Industrial Flight Electronics and FPV Propulsion Systems
We provide comprehensive engineering supply of Axisflying flight control electronics, high-torque brushless motors, and thermal imaging systems: Argus PRO and ECO stacks, AF2207 and C2807 motors, Cineon C35 ducted platforms, 640x512 VOx thermal cores, and Thor VTX transmitters with direct delivery.
Axisflying Equipment Lines and Flight Electronics
Technical configuration of UAV components aligned with engineering specifications, communication protocols, and mission payload requirements.
Flagship Flight Controller and ESC Stacks Series Argus PRO
Axisflying Argus PRO series flagship flight control and electronic speed controller stacks are engineered for heavy-lift cinematic platforms, high-speed UAVs, and industrial drones.
The system pairs a high-performance flight controller powered by a 480 MHz STM32H743 MCU with a rugged 4-in-1 ESC delivering 65A to 80A continuous current per channel under up to 8S LiPo power.
The electronics are encapsulated in a full CNC machined aluminum heat-sink enclosure that protects against thermal throttling and shields sensitive signal traces from electromagnetic interference.
Featuring dual redundant ICM-42688P and BMI270 gyroscopes, a 128MB Blackbox flash memory for granular data logging, and plug-and-play ports for DJI O3 and Walksnail HD digital video units, Argus PRO ensures uncompromised flight stability.
Specify MCU architecture (H743/F722), ESC current rating (65A/80A), battery cell count (4-8S), and digital VTX interface.
Universal Flight Stacks and All-In-One Boards Argus ECO, Mini and AIO
Axisflying Argus ECO, Argus Mini, and All-In-One (AIO) control electronics are engineered for 3.5 to 5-inch freestyle quadcopters, lightweight cinewhoops, and training platforms.
The Argus ECO series incorporates an STM32F405 MCU matched with 40A, 50A, or 60A 4-in-1 ESCs on standard 30.5×30.5 mm mounting footprints supporting BLHeli_S and Bluejay firmware.
Compact Argus Mini 20×20 mm stacks and Argus AIO single-board controllers integrate an F4/F7 MCU, 20A–40A ESC, high-precision current sensor, and dual 9V/5V BEC modules onto a single board.
Integrated onboard TVS transient voltage suppressor diodes safeguard the power circuitry against voltage spikes and regenerative back-EMF.
Specify mounting pattern (20x20 or 30.5x30.5 mm), ESC current rating (20A–60A), and board format (stack vs AIO).
Brushless 5" Drone Motors Series AF2207, AF2306 and Modular AF2406
Axisflying AF and C series original brushless drone motors are precision engineered for 5-inch freestyle and competitive racing UAVs.
These motors feature proprietary Bearing Shield Technology (BST) integrating IP53-rated protective rubber seals that isolate precision ball bearings from dust, sand, and moisture ingress.
The portfolio includes industry-standard AF2207 and AF2306 stators rated at 1850KV and 1960KV for 6S LiPo power, alongside 2450KV and 2750KV variants for 4S systems.
The revolutionary AF2406 Quick-Swap modular motor allows rapid field replacement of damaged bell assemblies or stators within seconds without requiring soldering irons or specialized workshop tools.
Specify stator size (2207/2306/2406), KV rating, operating battery voltage (4S/6S), and shaft mounting style.
Heavy-Duty High-Thrust FPV Motors Series C2807, AZ2812 and AE3115
Axisflying large-format heavy-thrust brushless motors are built for 7 to 10-inch long-range cruisers, cinematic cinelifters, and industrial multicopters carrying payloads up to 5 kg.
The C2807 series (1350KV, 1500KV, 1750KV) is optimized for 7–8 inch propellers, the high-torque AZ2812 (1050KV, 1350KV) provides exceptional rotational authority, and the massive AE3115 line (900KV, 1050KV) drives 9–10 inch props efficiently under 6S to 8S LiPo/Li-Ion power.
Built with 0.2 mm Kawasaki silicon steel laminations, high-grade N52SH arc magnets, and heavy-duty Japanese NSK bearings, these motors produce static thrust outputs exceeding 4.5 kg per axis with exceptional thermal dissipation.
Ducted Cinewhoop Frames and BNF Drones Series Cineon C20, C25, C30 and C35
Axisflying Cineon series ducted cinewhoop frames and BNF (Bind-and-Fly) drones are engineered for close-proximity filming around people, interior architectural cinematography, and confined industrial inspections.
The family includes Cineon C20 (2-inch), C25 (2.5-inch), C30 (3-inch), and C35 V3 O4 Pro (3.5-inch) platforms.
Built on high-modulus T700 carbon fiber baseplates enclosed by impact-resistant injection-molded polycarbonate ducts with high-density EVA foam bumpers, Cineon frames feature silicone vibration-damped camera isolation mounts that completely eradicate video jello in 4K/60fps footage while seamlessly integrating DJI O3 and O4 Air Unit digital transmission modules.
Heavy-Duty Freestyle Carbon Frames Series Manta 5, Manta 6 and Bando 5
Axisflying Manta and Bando carbon fiber freestyle frames are engineered to withstand extreme impacts during aggressive aerobatic flights, obstacle navigation, and abandoned structure (bando) sessions.
The Manta 5, Manta 5 SE V2, and Manta 6 frames feature Squashed-X and DeadCat geometry configurations that remove propeller blades from the camera's field of view.
The extreme-durability Bando 5 and Bando 5.5 series incorporate 6.0 mm chamfered T700 carbon fiber arms and precision CNC machined 7075-T6 aircraft-grade aluminum camera protection cages. All kits include comprehensive TPU accessories for mounting antennas, XT60 connectors, and GPS receivers.
Thermal Imaging FPV Camera Modules 640x512, 256x192 and Owl Night Vision Cameras
Axisflying compact thermal imaging camera cores and ultra low-light night vision modules are designed for search-and-rescue, industrial line inspection, and nocturnal surveillance UAVs.
The 640×512 and 256×192 thermal cores utilize uncooled 12 µm VOx microbolometer detectors with high thermal sensitivity (NETD ≤ 40 mK at 25 °C), outputting real-time standard CVBS composite video (PAL/NTSC) directly to onboard analog video transmitters.
The Owl and Naja starlight night-vision cameras incorporate 0.0001 Lux ultra-sensitive Black Light Pro sensors, enabling crystal-clear tactical navigation and object identification in complete darkness.
High-Power Video Transmitters Thor 5.8G, Antennas and Maintenance Spares
Axisflying RF video transmission equipment and genuine maintenance components ensure extended telemetry range and rapid UAV repairs.
The Thor 5.8GHz video transmitter features adjustable power levels from 25 mW up to 2500 mW (2.5W) with an integrated CNC heat-sink and active micro-cooling fan to eliminate thermal power sag on long-range flights.
The portfolio also includes Diamond 5.8GHz circular polarized high-gain antennas (RHCP/LHCP), replacement T700 carbon fiber arms and plates for all frame series, factory-balanced motor bells with N52SH magnets, Japanese NSK/NMB bearings, and filtered step-down BEC regulator boards.
Engineering Selection and Compatibility Verification
Our engineering team conducts thrust-to-weight, aerodynamic loading, and power consumption calculations to select the exact Axisflying configuration for your UAV platforms.
For Argus PRO and ECO series flight controllers and ESC stacks, we verify compatibility with DJI O3/O4 Air Units, ELRS and Crossfire telemetry protocols, and continuous current ratings.
For brushless motors, we configure optimal KV ratings against propeller sizing (2-inch to 10-inch) and battery configurations (4S, 6S, 8S) using official Axisflying dynamometer bench testing data. For thermal cores, we verify optical lens focal lengths and composite video output interfaces.
Industrial Standards and Operational Applications
Axisflying UAV systems are engineered for reliable operation under demanding environmental conditions conforming to ISO 9001 quality management and IP53 Bearing Shield Technology (BST) standards.
Cineon C25–C35 cinewhoops and Argus flight stacks operate in commercial cinematography, architectural inspection, and media broadcasting. High-thrust C2807/AE3115 motors and Kolas frames serve in search-and-rescue, environmental survey, and utility inspection missions.
The 640x512 VOx thermal camera cores integrate into inspection drones for non-contact thermal monitoring of power grids, pipelines, solar farms, and critical infrastructure.
System Configuration, Service Kits and Accessories
We deliver complete turnkey packages and field maintenance kits, including genuine T700 high-modulus carbon fiber arms, 7075-T6 CNC aluminum camera brackets, dynamically balanced N52SH motor bells, NSK/NMB bearings with dust seals, impact-resistant polycarbonate ducts, high-power Thor 2.5W video transmitters, and Diamond antennas.
All delivered components include original factory test certificates, pinout schematics, and technical instruction manuals.
Commercial Scope and Terms of Delivery
We do not claim exclusive distributorship or instant stock for every catalog part number. We exclude toy-grade consumer quadcopters. Delivery schedules, logistics routes, and final commercial terms are established in direct supply contracts upon specification approval.
Request Technical Specification for Axisflying Equipment
Submit your technical requirements, bill of materials, or project specifications. Our engineering team will prepare a detailed technical and commercial proposal with confirmed pricing and delivery schedules.
