Specify and source Oshkosh AeroTech airport equipment around your terminal gate geometry, aircraft fleet mix and project requirements.
Equipment and airport systems
Choose your equipment category. For new projects, provide terminal plans and aircraft mix; for upgrades, specify installed equipment details.
Jetway passenger boarding bridges
Jetway passenger boarding bridges provide enclosed, weather-protected passenger access between airport terminal gates and aircraft cabin doors. The structural engineering accommodates varied terminal architectures, seismic conditions and wind load requirements.
Selection requires gate geometry, elevation differences, aircraft mix and apron slope parameters. The product line includes apron drive, radial and fixed walkway bridge configurations with automated leveling and multi-axis articulation.
Tempest-i and Tempest-si aircraft deicers
Tempest-i and Tempest-si deicers provide rapid and reliable aircraft deicing and anti-icing fluid application during severe winter weather operations. The purpose-built low-profile chassis improves operator visibility, maneuverability and apron safety around narrowbody and widebody aircraft.
Units feature high-capacity fluid heaters, computerized proportional fluid blending, and the single-operator BakTrak drive system that allows vehicle movement directly from the aerial basket.
LEKTRO electric towbarless tow tractors
LEKTRO electric towbarless pushback tractors handle commercial aircraft apron pushback, positioning and hangar maintenance movements without conventional towbars. The gentle nose landing gear cradle clamping system eliminates shear pin failures and towbar stress on aircraft nose gear struts.
Series models include AP8650, AP8850 and AP8950, delivering all-weather high-torque electric traction and zero ramp emissions.
Commander 15i, 30i and 60i cargo loaders
Commander 15i, 30i and 60i cargo loaders transfer unit load devices (ULD) and heavy freight containers to main and lower cargo compartments. Equipped with heavy-duty lifting scissors and reliable hydraulic powertrains, Commander loaders ensure stable elevation under dynamic cargo loads.
Systems feature dual-platform designs, omni-directional motorized conveyor rollers and automated container position sensing.
Jetpower 400 Hz ground power units
Jetpower solid-state frequency converters and DC rectifiers supply regulated 400 Hz and 28 VDC electrical power to aircraft during terminal gate parking. Mounting configurations include under-bridge suspended housings, apron ground trailers and stationary gate pedestals.
The power electronics utilize advanced pulse-width modulated inverters, low total harmonic distortion (THD), and automatic cable retriever reels.
JetAire pre-conditioned air (PCA) units
JetAire point-of-use and mobile pre-conditioned air (PCA) units deliver temperature-controlled conditioned air to parked aircraft cabins and cockpits.
Operating under extreme ambient heat or sub-zero winter temperatures, JetAire units maintain required cabin temperatures without running auxiliary power units (APU). Equipment options include direct DX refrigeration cycles, variable-speed blowers and insulated delivery ducting.
LEKTRO B80 electric baggage tractors
LEKTRO B80 and B80s electric baggage and cargo tractors transport luggage carts, ULD dollies and maintenance trailers across terminal aprons and baggage makeup areas.
Built on heavy-gauge steel chassis with industrial solid or pneumatic tires, these compact tractors provide exceptional turning radiuses and high drawbar pull. Features include regenerative braking, low maintenance AC drive motors and ergonomic operator cabins.
AmpCart mobile charging platforms
AmpCart towable charging platforms and AmpTek intelligent power management systems deliver on-ramp electric charging for ground support equipment (eGSE) fleets.
The mobile design enables rapid deployment across remote aircraft parking positions, cargo ramps and maintenance hangars without costly civil electrical grid trenching. Platforms feature high-power DC fast-charging ports, battery storage buffers and smart load scheduling.
Oshkosh AeroTech unites decades of airport engineering leadership across aviation ground operations. The product portfolio includes world-renowned Jetway passenger boarding bridges, LEKTRO towbarless pushback tractors, Tempest deicing systems and Commander cargo loaders.
Projects span commercial passenger terminals, air cargo hubs, military air bases and fixed-base operations (FBO).
For new turn-key installations or terminal modernization programs, equipment selection is engineered to match target aircraft fleet mixes, terminal layout blueprints and apron operational constraints.
Dedicated engineering teams support each aviation project from initial ramp stand layout evaluations through to commissioning and long-term maintenance planning.
Passenger Boarding Bridge Engineering and Integration
Jetway passenger boarding bridges deliver reliable passenger transfer between terminals and aircraft in all climates. System specification begins with terminal gate geometry, apron elevations, flood light locations and passenger boarding traffic flows.
Apron drive bridges provide flexible multi-aircraft docking, while radial bridges optimize restricted ramp space.
Integrated designs incorporate Jetpower 400 Hz ground power units, JetAire PCA air supply systems and JetDock automated docking sensors directly onto the bridge structure to clear the ramp of ground congestion, ensuring seamless passenger boarding while keeping ramp service lanes completely open for baggage tugs, catering trucks and fueling operations.
Winter Deicing Operations and Fleet Reliability
Tempest-i and Tempest-si deicing vehicles deliver operational speed and environmental compliance during winter conditions. Specification includes local meteorological minimum temperatures, Type I deicing fluid and Type IV anti-icing fluid reservoir capacities, and burner heating ratings.
The BakTrak single-person operation technology allows one technician to drive the vehicle and operate the deicing spray boom simultaneously, reducing turnaround delays and minimizing fluid waste through precision proportional delivery, maintaining uninterrupted winter flight operations even during heavy snowstorms.
Electric GSE Pushback and Towing Performance
LEKTRO electric towbarless tractors provide quiet, smooth and zero-emission aircraft ground handling across aprons and hangars. By lifting and securing the aircraft nose landing gear directly within a patented cradle, LEKTRO tractors eliminate the need for distinct towbars for varied aircraft types.
Sizing considers maximum takeoff weight (MTOW), ramp surface slope, expected pushback distance and turnaround frequency, backed by heavy-duty industrial traction batteries and regenerative braking systems.
Air Freight and Container Handling Systems
Commander cargo loaders support critical cargo ramp operations for passenger widebody bellies and dedicated freighter main decks. Platforms accommodate standard containers and pallets up to 30 tons with responsive proportional hydraulic lifting.
Sizing evaluates aircraft sill heights, bridge travel speed, roll speeds and automatic container transfer orientations, ensuring dependable turnaround performance for express cargo carriers and international passenger airlines.
Gate Electrification: 400 Hz Power and Conditioned Air
Mounting Jetpower solid-state frequency converters and JetAire PCA air handlers directly on gate infrastructure eliminates ramp diesel generators and auxiliary power unit (APU) fuel burn.
Jetpower systems deliver clean, balanced 400 Hz electrical power with superior overload protection, while JetAire provides pre-conditioned fresh air for passenger cabin comfort. Projects specify utility electrical supply capacities, bridge cable drop carriers and thermal air delivery hose lengths.
Apron Electrification Strategy with AmpCart Platforms
The AmpCart mobile charging platform facilitates airport transitions to electric ground support equipment (eGSE). By offering mobile DC fast charging directly at remote stands and maintenance aprons, AmpCart bypasses traditional electrical grid excavation and substation expansion delays.
AmpTek intelligent load sharing continuously monitors ramp power demands and balances charging currents across multiple vehicles simultaneously.
Spare Parts Support, Warranty and Commissioning
Global logistics supply genuine spare parts, replacement assemblies and retrofit packages for all active equipment. Sourcing uses verified manufacturer serial numbers, bridge codes and assembly schematics.
Complete equipment shipments include factory acceptance documentation, operation manuals, manufacturer warranties and dedicated technical commissioning support for civil aviation authorities and airport operators.
Procurement Terms, Lead Times and Scope Confirmation
Exact equipment configurations, production schedules, international sea freight delivery terms (CIF, CIP, DAP), on-site installation oversight and training curricula are finalized individually for each airport tender and commercial project inquiry.
Specifications comply with IATA Airport Handling Manual (AHM) standards and applicable international civil aviation norms. Our technical specialists review airfield power distributions and coordinate comprehensive equipment logistics aligned with seasonal airport traffic demands.
Project specification inputs
Target aircraft fleet, airport climatic extremes, apron elevations, electrical power availability and gate integration parameters.
Maintenance and replacement parts
Machine serial number, bridge factory code, manufacturer part numbers and delivery schedule requirements.
Send project requirements
Attach your equipment specification or terminal drawings. Include contact details and project timeline to start specification review.
