Danish Manufactured Heavy-Duty Hydraulic Lifting & Maintenance Systems
AC Hydraulic Professional Workshop & Lifting Equipment
SpareX delivers the complete international range of high-performance hydraulic and pneumatic-hydraulic lifting equipment engineered and produced by AC Hydraulic A/S in Viborg, Denmark. We provide professional trolley jacks for passenger and light commercial vehicles, heavy-capacity air hydraulic jacks for commercial transport and off-highway machinery up to 65 tonnes, rail-suspended and floor-running pit jacks for commercial service pits, workshop portal presses up to 100 tonnes, transmission jacks, foldable shop cranes, and genuine overhaul seal kits for transport depots and service workshops worldwide.
AC Hydraulic Heavy-Duty Lifting, Jacking & Press Families
Select your required AC Hydraulic equipment category below, or submit your fleet maintenance specifications for an engineering review and commercial quote.
AC Hydraulic DK Series Hydraulic Trolley Jacks
Engineered and manufactured in Denmark, AC Hydraulic DK Series commercial hydraulic trolley jacks provide exceptional lifting safety and durability for automotive service centers, tire shops, and industrial vehicle fleets.
The comprehensive range spans from ultra-low clearance models such as DK13HLQ and DK20HLQ with an entry height of just 80 mm and maximum lift up to 735 mm, to heavy-capacity shop jacks rated up to 12 tonnes (DK100Q, DK120Q).
Each jack incorporates the patented Quick Lift foot pedal mechanism and an ergonomic dead man's control handle for precise, controlled lowering.
The rigid welded chassis resists torsional twisting when lifting vehicles on uneven workshop floors, while quiet polyurethane-tired castors on sealed roller bearings prevent shop floor scuffing and wheel seizure.
AC Hydraulic 25/50/65 Series Air Hydraulic Commercial Jacks
Heavy-duty AC Hydraulic air hydraulic jacks, including the 25-1, 25-2, 50-1, 50-2, 50-3, and 65-1 series, deliver robust lifting capacities up to 65 tonnes for commercial trucking, bus depots, heavy mining machinery, and aviation ground support.
Powered by standard shop air supplies (9–12 bar), these units feature hard-chromium plated multi-stage telescopic piston rods, intuitive push-button handle controls, and internal check valves preventing uncommanded descent during pneumatic line drops.
The extended pivoting handle allows technicians to manage lifting and lowering from a safe standoff distance, while standard hardened extension adapters F50 and F100 accommodate diverse chassis clearances and axle configurations.
AC Hydraulic GD Series Suspended Pit Jacks
Suspended rail-guided pit jacks from AC Hydraulic, including GD100, GD150, GD200, and dual-ram GDT models, are engineered for high-efficiency maintenance pits in commercial truck workshops, municipal transit authorities, and statutory inspection centers.
The adjustable suspension chassis accommodates pit rail widths between 590 and 1,400 mm, while the transversely sliding hydraulic ram allows flexible lateral positioning directly beneath axles, suspension points, or subframes.
Equipped with dual-speed air-hydraulic pump units for rapid unloaded stroke and controlled high-pressure lift, the chassis incorporates automatic spring-brake mechanisms that lock firmly against the pit rails whenever load exceeds 800 kg.
AC Hydraulic GGD150 Series Floor Pit Jacks
Floor-running pit jacks of the GGD150 and short-base GGD150S series maneuver directly on the concrete floor of inspection pits via four spring-loaded swivel castors, eliminating the expense and structural constraints of wall-mounted guide rails.
When loaded past 800 kg, the internal spring mechanism compresses to seat the heavy-duty steel base directly on the floor for maximum structural stability. The pneumatic-hydraulic power unit provides rapid ram approach and powerful 15-tonne working capacity.
An extended cylinder stroke of 800 mm ensures complete undercarriage access in deep pit architectures across low-floor transit buses, road trains, and agricultural machinery.
AC Hydraulic PJ & P Series Hydraulic Workshop Presses
AC Hydraulic workshop hydraulic presses, covering junior PJ series (16–25 tonnes) and heavy P series (40, 60, and 100 tonnes with manual H or electro-hydraulic EH drives), are designed for demanding bearing extraction, shaft straightening, bushing pressing, and stamping operations.
Built from heavy-gauge Scandinavian structural steel, the portal frame eliminates deflection under maximum rated pressure. Integrated cable winches facilitate effortless table height adjustment, while the ram traverses laterally along the upper crosshead on roller bearings.
Each press includes a precision glycerine-filled pressure gauge, heavy V-blocks, and interchangeable press pin kits.
AC Hydraulic VL & VLT Series Hydraulic Transmission Jacks
Transmission jacks from AC Hydraulic, including single-stage VL3, VL6, VL10 (300–1,000 kg) and two-stage telescopic VLT6 and VLT12 models (600–1,200 kg), streamline the secure removal, maneuvering, and installation of heavy gearboxes, transfer cases, differentials, and fuel tanks.
A wide 5-leg star base equipped with oil-resistant swivel castors prevents tipping during workshop transport, while a dual-acting foot pump frees technician hands for precise powertrain alignment.
The fully adjustable 2-way tilting cradle equipped with heavy tie-down safety chains ensures micrometric adjustment during bolt hole alignment.
AC Hydraulic WJN Series Foldable Workshop Cranes
Foldable workshop cranes by AC Hydraulic, comprising WJN5 (550 kg), WJN10 (1,100 kg), and wide-base WJN20EUR (2,000 kg), are designed for extraction and installation of engines, transmissions, and industrial machine subassemblies.
Outrigger legs fold upright in seconds without tools to optimize valuable shop floor space, while the 4-position telescopic jib features a 360-degree forged swivel hook with spring safety latch.
Low-clearance wheel bogies starting at only 100 mm facilitate easy entry under low-clearance passenger cars and delivery vans.
Genuine AC Hydraulic Seal Kits, Replacement Rams & Valves
SpareX supplies authentic manufacturer overhaul packages (Pakningssæt / Seal Kits), complete replacement rams, piston rods, pump plungers, and hydraulic control valves across the entire AC Hydraulic equipment catalog.
High-grade polyurethane wiper and piston seals withstand extreme system pressures exceeding 500 bar, providing durable leak prevention and restoring original factory pressure performance in demanding service cycles.
Factory Danish replacement components ensure precise dimensioning, preventing pressure fade and protecting internal cylinder walls from micro-abrasion.
Official AC Hydraulic Technical Literature & Catalogs
Engineering Equipment Sizing for Commercial Pits and Fleet Workshops
To select the ideal AC Hydraulic lifting solution for your service center or fleet depot, outline your operational requirements: serviced vehicle types (passenger vehicles, vans, tractor-trailers, municipal buses, agricultural machinery, or heavy mining haulers), required lifting capacity (from 1.3 to 65 tonnes), minimum entry clearance, and required lifting stroke. When outfitting vehicle service pits with GD series pit jacks, SpareX technical specialists determine the exact transverse frame geometry according to pit rail width (590 to 1,400 mm), pit rail profile (angle iron, channel profile), and recess depth. For facilities without guide rails, self-contained GGD150 series floor-running pit jacks offer versatile operation on spring-loaded base castors. Component workshops benefit from rigid PJ and P series portal presses with manual dual-speed or electro-hydraulic pump packs, foot-operated VL series transmission jacks, and foldable WJN engine cranes. Dual-point support beams T4-1 and T5-1 can be included for symmetrical axle lifting.
Genuine Factory Pakningssæt Seal Kits, Replacement Rams & Valves
To ensure reliable continuous duty across transport fleets and repair facilities, SpareX maintains prompt availability of original AC Hydraulic spare parts and overhaul kits. Our inventory comprises authentic Pakningssæt (Seal Kits) for cylinders and pumps, hard-chrome plated piston rods, high-pressure pump plungers, Quick Lift foot pedal linkage assemblies, overload relief and descent control valves, polyurethane guide wheels, rubber saddle pads, and pneumatic motor modules. Installing factory Danish seals maintains hydraulic integrity at working pressures up to 500 bar, restores rated lifting capacity, and prevents fluid leaks. SpareX engineers verify part numbers using original factory exploded drawings and equipment serial numbers, facilitating expedited courier dispatch for urgent downtime prevention.
Contact SpareX AC Hydraulic Equipment Specialists
Submit your required equipment bill of materials, inspection pit measurements, or machinery nameplate photographs. SpareX engineering specialists will promptly prepare a comprehensive quotation with competitive delivery schedules and technical specifications.
