Industrial Temperature Sensors & Equipment Supply from Asia
2H-TERM Temperature Sensors & Probes
We provide end-to-end direct supply of genuine 2H-TERM temperature measurement technologies: industrial thermocouples of calibrations J, K, N, and S, precision RTD resistance temperature detectors Pt100 and Pt1000, AFR series immersion probes, thermowells, and extension cables with manufacturer warranty.
2H-TERM Sensor Portfolio & Measurement Categories
Flagship thermocouples, precision platinum resistance sensors, and heavy-duty thermowell assemblies:
2H-TERM Industrial Thermocouples TC
2H-TERM industrial thermoelectric temperature transducers across calibrations J (Iron-Constantan, up to +750 °C), K (Chromel-Alumel, up to +1200 °C), N (Nicrosil-Nisil, up to +1200 °C), T (Copper-Constantan, -200 °C to +350 °C), E (Chromel-Constantan), and noble platinum-rhodium types S, R, and B (up to +1600..+1800 °C).
Engineered for continuous high-temperature monitoring across metallurgical melting, heat treatment furnaces, annealing lines, autoclaves, and chemical reactors. Manufactured in single and duplex configurations with compacted mineral insulation (MIMS high-purity MgO).
Sheaths are crafted from AISI 316L stainless steel, heat-resistant AISI 310, Inconel 600 nickel superalloys, and gas-tight alumina ceramic protection tubes. Available with insulated, grounded, and exposed measuring junctions for ultra-fast transient gas temperature tracking.
Operating range from -200 °C to +1800 °C, probe diameters from 0.5 to 8.0 mm, single & duplex elements.
2H-TERM RTD Resistance Temperature Detectors
High-precision 2H-TERM resistance temperature detectors utilizing advanced thin-film and wire-wound platinum sensing elements Pt100, Pt500, Pt1000 (temperature coefficient alpha = 0.00385 °C⁻¹), and NTC/PTC thermistors.
Engineered for automated process control loops across food processing equipment, pasteurizers, pharmaceutical bioreactors, cryogenic systems, HVAC, and thermal power utilities.
Delivering repeatable linear measurements from -200 °C to +600 °C under Class B, Class A, 1/3 DIN, and 1/10 DIN accuracy grades. Wired in 2-, 3-, or 4-wire circuit configurations that completely eliminate line lead-wire resistance over extended instrumentation runs.
Class A, Class B, 1/3 DIN accuracy; 2/3/4-wire setups; cryogenic, steam, and liquid process loops.
2H-TERM AFR Series Immersion Probes
Compact industrial cable-type temperature probes of the AFR series (including AFR-0401-F0070-1000 configurations and tailored variants) designed for continuous monitoring across oil circuits, hydraulic power packs, gearbox lubrication reservoirs, automated packaging lines, and process vessels.
The stainless steel sheath in AISI 304 or AISI 316L (diameters 4, 5, or 6 mm) is hermetically crimped to heat-resistant multiconductor cable. The cable entry is reinforced with a heavy-duty stainless steel relief spring to prevent conductor fatigue and pinching under severe industrial vibration.
Standard cable lengths include 2, 3, 4, 5, 7, and 10 meters with silicone, PTFE, or metal-overbraid jackets.
Cable lengths 4 m, 5 m, 7 m; sheath diameters 4, 5, 6 mm; waterproof anti-vibration crimp.
2H-TERM Thermowells & Protection Tubes
Solid barstock drilled and fabricated tubular thermowells from 2H-TERM engineered for severe industrial service under static pressures up to 250 bar, extreme flow velocities, and aggressive chemical exposure.
Completely isolating the primary sensor insert from direct process contact to eliminate containment breach risks while permitting rapid sensor replacement and calibration without draining or shutting down the pipeline.
Manufactured with threaded (G1/4, G1/2, G3/4, 1/2 NPT), flanged (EN 1092-1, ASME B16.5), and socket-weld connections in AISI 316L, AISI 316Ti, AISI 310, Inconel 600, Hastelloy C-276, Monel, and Titanium.
Pressures up to 250 bar; threads G1/2, NPT, flanges DN15-100; AISI 316L/Ti, Inconel, Hastelloy.
2H-TERM Temperature Sensors for Plastics & Extrusion
Dedicated instrumentation line of 2H-TERM thermocouples and RTDs tailored for polymer processing machinery: injection molding machines, single/twin screw extruders, calenders, thermoforming systems, and hot runner molds.
Featuring bayonet cap probes with adjustable compression springs designed for 12 mm and 14 mm bayonet adapters, threaded bolt sensors (M6, M8, M10, 1/4-20 UNC) for nozzle heating bands, and melt thermocouples.
Engineered to ensure intimate thermal contact against the barrel wall without air gaps, preventing polymer melt overheating and degradation.
Heavy-duty industrial measurement assemblies from 2H-TERM configured with DIN Form B, Form A connection heads, explosion-proof Ex d / Ex ia terminal enclosures, and high-purity Alsint 99.7 alumina or Pythagoras porcelain ceramic protection tubes.
Built for severe operating conditions in metallurgical smelters, cement rotary kilns, incinerators, and thermal power boilers with temperatures reaching +1800 °C.
Connection heads can house head-mounted programmable transmitters with 4–20 mA, 0–10 V, HART protocol, or RS-485 Modbus digital interfaces for seamless connection to DCS/PLC control architectures.
DIN B/A heads; Alsint ceramic sheaths to +1800 °C; 4–20 mA, HART, RS-485 head transmitters.
2H-TERM Extension & Compensating Cables
Specialized extension and compensating cables manufactured by 2H-TERM designed to route thermoelectric signals from primary sensors to instrumentation loops without signal attenuation or thermal EMF errors.
Produced with matched thermocouple-grade conductor alloys (KX, JX, TX, NX, EX) and extension alloys (SX/RX, KCA, KCB).
Sheathing options include PVC (+105 °C), high-grade silicone (+180 °C), fluoropolymers PTFE / FEP / PFA (+260 °C), and heat-resistant braided glassfiber with metal overbraid (+400..+600 °C).
Equipped with aluminum-polyester tape or tinned copper braiding for complete electromagnetic interference (EMI) protection.
Comprehensive portfolio of mechanical mounting hardware and polarized quick-connectors from 2H-TERM designed for leak-tight installation and rapid maintenance of temperature sensors.
Featuring AISI 316 stainless steel single and double ferrule compression fittings for probe sheath diameters from 1.0 to 8.0 mm with NPT threads (1/8, 1/4, 1/2 NPT) and BSPP threads (G1/8, G1/4, G3/8, G1/2), adjustable sliding flanges, weld-in boss fittings, and bayonet mounting adaptors.
Also includes standard and miniature thermocouple plugs and sockets with polarized pins made of matched thermocouple alloys compliant with IEC and ANSI color identification standards.
AISI 316 compression fittings for 1-8 mm tubes; G1/8-G1/2, NPT; IEC/ANSI connectors.
Application Engineering & Temperature Sensor Sizing
Our instrumentation specialists assist industrial facilities in sizing the correct 2H-TERM temperature transducer matched to process operating temperatures, fluid velocity, chemical corrosiveness, and required response time. We evaluate machine mounting constraints: thermowell bore diameter, insertion length, high-pressure ratings up to 250 bar, and mechanical vibration profiles. Where extreme furnace conditions dictate, we specify mineral-insulated MIMS assemblies or high-purity Alsint 99.7 alumina ceramic protection tubes rated up to +1800 °C. All technical specifications are validated prior to dispatch.
We assemble comprehensive installation packages for industrial temperature loops: solid barstock straight and tapered thermowells, AISI 316 compression fittings with NPT and BSP threads, bayonet caps and adapters for extruder barrels, miniature and standard IEC/ANSI thermocouple plugs and jacks, and continuous spools of shielded extension cables insulated with PTFE, silicone rubber, or stainless steel braided glassfiber.
Commercial Supply Terms & Delivery
Industrial temperature sensors, connection head assemblies, and accessories are delivered under formal international commercial agreements with export customs compliance and comprehensive freight insurance directly to your facility. Pricing, lead times, and factory warranty milestones are confirmed in technical annexes. Every shipment includes factory inspection certificates and schematics.
