Andyor Packaging Machinery & Robotic Automation

RA-PL Robotic Palletizers and PEMH Display Tray Palletizing Systems

AND&OR RA-PL series robotic palletizing systems are engineered for automated high-speed palletizing of plastic bottles, containers, and cartons.

The system utilizes an articulated robot arm equipped with a specialized bilateral clamp plate gripper that prevents deformation of lightweight blow-molded containers.

The advanced PEMH series integrates in-line corrugated tray erection, hot-melt gluing, and quarter-pallet layer loading suited for retail requirements.

Supplying replacement gripper clamp plates, slew drive servo motors, slip-sheet vacuum cups, and linear slide assemblies.

DMAM-E, RDZ-DMAM, and DEPAL Automated Container Depalletizers

AND&OR depalletizing systems ensure continuous layer-by-layer feeding of empty plastic bottles, glass containers, and cans into bottling lines. The DMAM-E unit features a high-level motorized platform for pallet heights up to 1.5 meters.

For tall pallets reaching 2.8 meters, robotic column RDZ-DMAM and portal DEPAL systems incorporate stabilizing perimeters and gentle sweep transfer bars.

Supplying platform lifting chains, sweep gearmotors, centering pneumatic cylinders, and ML multi-lane table modules.

LSR Rotary Leak Testers and LS Series Linear Micro-Hole Detection Units

Container seal inspection is a core specialty of AND&OR. High-speed LSR rotary carousels incorporate between 8 and 48 testing heads, detecting micro-holes down to 0.1 mm via pressure decay monitoring at speeds up to 48,000 bottles per hour.

Linear LS1K and LS5K units mount directly at blow-molding machine discharges, while VLS-R vacuum decay modules test pre-sealed pharmaceutical and chemical containers.

Supplying sealing test heads (18–120 mm), calibrated micro-nozzles, piezoresistive sensors, and high-speed discharge valves.

SIA and SIAL Automatic Handle Applicator Machinery for Bottles and Jerrycans

AND&OR SIA machines serve as an international benchmark for automated insertion of plastic clip-on handles around container neck finishes from 1.5 to 20 liters. Rotary configurations reach throughput speeds of up to 24,000 containers per hour.

For side-groove handle applications, the SIAL series enables replacing costly extrusion-blown handles with lightweight, cost-effective PET containers.

Supplying handle guide rails, crimping pushers, pneumatic gripping carriages, and vibratory sorting bowls.

RIO Cap Lining, Foil Induction Liner, and Dispenser Insertion Machines

RIO rotary carousels perform continuous blanking and insertion of induction foil liners, cardboard seals, and expanded foam discs directly into threaded closures at speeds up to 60,000 caps per hour.

An integrated hot-melt glue applicator prevents liner displacement during handling and transit to capping equipment.

Supplying blanking punch dies, heated hot-melt glue nozzles, vacuum suction heads, and rotary indexing turrets.

BM and BMS Tubular Film Bagging Machinery and DBM Debagging Systems

To protect empty blow-molded bottles from contaminants during intermediate warehousing, AND&OR supplies BM and BMS series automated baggers. The system collates bottles, wraps the block in tubular polyethylene film from a reel, and seals both package ends with impulse sealing bars.

At the bottling facility, DBM debaggers slit the outer film and push layers smoothly onto feed conveyors.

Supplying nichrome impulse heat elements, PTFE anti-stick tapes, guillotine cutting knives, and carriage timing belts.

CCL and CCR Dome Trimming Units and FH Series Container Neck Facing Machines

In extrusion blow-molding operations, AND&OR CCL and CCR dome trimming machines deliver precise cold-knife cutting of blow-molded domes using high-alloy circular blades. This eliminates micro-burrs and chips, providing a uniform sealing surface.

Complementary FH series neck facing units mill the mouth surface with indexable carbide inserts, preparing the container for leak-free induction sealing.

Supplying alloy circular cutting knives, carbide milling inserts, clamping collet chucks, and container neck guides.

OMNI Series Autonomous Mobile Robots (AMR) and Intralogistics Systems

For automated transport of finished pallets and replenishment of empty container stacks, AND&OR supplies OMNI1000 and OMNI1500 autonomous mobile robots with payloads up to 1,500 kg.

Equipped with omnidirectional Mecanum wheel drives and natural-feature laser SLAM navigation, the units navigate confined manufacturing aisles safely, linking bottling halls with automated warehousing.

Supplying Mecanum drive wheels, LiFePO4 battery modules, SICK safety laser scanners, and motion control hardware.

ETP and BCM Automated Case Packing and Tray Packing Systems

For secondary packaging of bottles and containers into corrugated cases, AND&OR manufactures the ETP and BCM series case and tray packing machines.

These systems integrate carton erecting from flat blanks, bottom flap tape or hot-melt sealing, multi-axis pick-and-place container grouping, and top flap closure. Capable of handling irregular container shapes, the lines support production rates up to 60,000 units per hour.

Supplying carton erecting suction cups, flap-folding guides, hot-melt glue nozzles, and case taper drive belts.