Equipment and spare partsBrowse manufacturers Search by manufacturerINDUSTRIAL AUTOMATION
Specify Delta Electronics motor drives, servo systems, PLCs, machine vision and industrial networking by model and application. We check the equipment configuration, interfaces and installation requirements before preparing a quotation.
Explore core equipment categories to examine engineering ratings, standard series and selection parameters for your automated manufacturing installation.
C2000 Plus/C2000 belongs to the standard drive range, while CP2000 is listed for fans and pumps. Compact families include MS300, MH300 and ME300. Select the family for the application, then define the exact configuration around the motor, supply and control system.
Selection data: rated motor power (kW), supply voltage class (220/380/460/690 V), overload capacity and industrial fieldbus protocol.
ASDA-A3 and ASDA-B3 are separate Delta servo families for motion control. For A3, the manufacturer specifies 3.1 kHz bandwidth, 24-bit absolute feedback, auto-tuning and vibration suppression. Specify the motor and servo drive as separate components of the required axis package.
Specification requirements: rated torque (Nm), base speed, 24-bit encoder resolution, EtherCAT/CANopen interface and holding brake options.
AS and AH are modular controller families. DVP includes standard, slim and motion CPUs with their own expansion ranges. Define the processors, signal channels and communication modules around the machine project when preparing the hardware package.
Sizing data: digital and analog I/O point count, multi-axis motion synchronization, Ethernet/IP industrial networking and power redundancy.
DOP-100 is divided into Basic, Standard, Advanced and Handheld categories; DOP-100L and DOP-300 are separate families. Select the terminal by its complete code, cutout, ports, supply and operator-interface project rather than screen size alone.
Provide display dimensions (inches), native resolution, IP65 front panel sealing, onboard Ethernet ports and SD memory logging.
The SCARA catalogue includes DRS60L6SS2 and DRS70L6SS2. Articulated models include DRV70L and DRV90L alongside other configurations. Define payload, workspace, gripper, controller and machine-vision integration for the required station.
Application parameters: payload capacity (kg), working reach (mm), repeatability tolerance and pneumatic/electric gripper type.
Delta machine vision combines DMV-C industrial cameras, DMV-T 3D time-of-flight cameras, vision controllers, lenses and lighting. These are separate inspection and image-processing systems for recognition, measurement and counting on automated lines, rather than interchangeable PLC modules.
Camera and optics selection depends on field of view, working distance, target surface and imaging conditions.
Provide camera model, field of view, working distance, lens, illumination and connection interface.
Delta DVS managed and unmanaged industrial Ethernet switches link PLCs, HMI panels and production network nodes. The Industrial Ethernet Solution range also includes SFP fibre transceivers and Ethernet-to-fibre media converters.
Specify port count, copper or fibre media, supply and mounting conditions, then check whether a selected managed model supports the required ring redundancy.
Provide network diagram, port types and count, supply, SFP requirements and ring topology needs.
Delta machine-tool CNC systems are selected by machine type, axis count, drive interfaces and the chosen controller documentation.
Specification parameters: number of coordinated axes, spindle motor interface, manual pulse generator (MPG) and operator panel layout.
DTB and DT3 are panel-mount temperature controllers; DTC is part of the modular range. Pressure sensing includes DPA and DPB. Define the measured variable, sensor input, control output and mounting method separately when preparing the instrument specification.
Provide range, signal, sensor input, supply and mounting details. Pt100 is a resistance temperature detector; J and K designate thermocouples.
For planned maintenance overhaul and emergency repair, we select replacement parts and subassemblies subject to verification: central processor boards, power IGBT inverter modules, detachable terminal blocks, optical servo encoders, dynamic braking resistors, power leads and shielded communication buses matched to original part numbers.
Specify serial number from drive/PLC nameplate, photo of the defective component and required cable harness length.
Our technical specialists verify model numbers directly against Delta Electronics technical documentation, ensuring voltage compatibility, matching industrial communication protocols and panel mounting dimensions.
Retrofit transition paths from discontinued models to current series are assessed for each project.
We supply replacement components and expansion modules subject to verification for planned preventative maintenance and urgent line restoration: I/O slices, encoder heads, IGBT power bricks, detachable connector plugs and specialized high-flex robotic cables.
Delta Electronics automation spans VFD drives, ASDA servos, AS and DVP PLCs, DOP-100 panels, DMV vision cameras and DVS network switches. Record the full model code and serial number from the nameplate.
Suffixes can determine interface and electrical configuration; provide photos of connectors when identification is incomplete.
When specifying a variable frequency drive, provide motor power rating, full load amperes, supply voltage, speed regulation range and torque characteristics. For centrifugal pumps and HVAC fans, CP2000 is listed in the fan and pump group.
C2000 Plus/C2000 belongs to the standard drive range; determine the control requirements from the application and motor data.
ASDA-A3 and ASDA-B3 servo systems are configured based on target torque curves, inertia ratio matching and positioning cycle requirements. Selected ASDA-A3 configurations offer 24-bit feedback; check encoder details for the chosen motor and drive.
For coordinated axes, verify EtherCAT or CANopen interfaces against the selected model's documentation rather than assuming uniform support.
In modular AS and AH systems, the project defines the package: CPU, digital and analogue input/output, temperature measurement and communications. For an existing machine, attach the cabinet drawing, installed module list and program.
A signal schedule identifies the modules required for the new system and the units serving the existing installation.
DOP-100 is divided into Basic, Standard, Advanced and Handheld categories. The current catalogue also lists DOP-100L and DOP-300 as separate families. For a replacement, provide the complete terminal model, panel cutout, ports and original application project with its development software version.
Delta DMV-C industrial cameras and DMV-T 3D ToF cameras form a dedicated imaging product line. Specify the object dimensions, inspection task, field of view, working distance and lighting. We then compare camera, lens, vision controller and accessory choices against the layout of the line.
This avoids treating a vision system as an ordinary PLC expansion card.
Delta DVS industrial switches connect automation network nodes. Managed and unmanaged models serve different network designs; SFP transceivers and Ethernet-to-fibre converters are listed separately. Provide a port schedule and a network diagram, including power and installation conditions.
Ring redundancy must be confirmed for the selected managed model, rather than assumed for every DVS switch.
Specify the complete procurement scope: standalone drives, controller modules, servo motors, touch terminals or parts for existing equipment. Provide manufacturer model codes, required cables and a bill of materials for each machine or control cabinet.
Item labels should match the attached photographs and project files.
Organize the bill of materials by cabinet and axis, including complete model codes, quantities, application and required cables. Attach wiring diagrams and original PLC/HMI projects. For a modular system, list the CPU, input/output modules and communications units separately.
Photographs of the cabinet and individual nameplates link each item to its installation position. Distinguish a package for a new machine from components required to maintain existing equipment. Describe the delivery destination, packaging requirements and the agreed scope for each line item.
We supply equipment and components for enterprises and integrators. Price, delivery schedule, availability, compatibility and documentation are agreed for the specific request; official dealer or authorized service status is not claimed.
Provide complete model codes, quantities and the delivery destination.
English-speaking contact