Equipment and spare partsBrowse manufacturers Search by manufacturerINDUSTRIAL BATTERIES AND POWER SYSTEMS
C&D Trojan (Shanghai) Energy Technologies Co., Ltd., known in Chinese as 西恩迪超骏（上海）能源科技有限公司, manufactures lead-acid batteries under two brands: C&D Technologies stationary batteries for backup and continuous power, and Trojan Battery deep-cycle traction batteries. C&D was founded in 1906 and Trojan in 1925; in 2018 the two brands were merged into one company, since 2022 the company has carried its current name with Trojan battery production in Shanghai, and it operates more than eight plants, three R&D centres and shipments to over 120 countries. Selection starts from the duty: the purpose of the site, voltage and power, autonomy time or cycles per day, and installation conditions. These decide the sealed or flooded version and the series, and the parameters are confirmed against the manufacturer's data sheet.
C&D stationary series, Trojan traction and solar series, monitoring systems and accessories. Some ranges are supplied as 2 V cells assembled into a string of the required capacity and voltage.
C&D Technologies and Trojan Battery: C&D stationary batteries, Trojan deep-cycle traction batteries. C&D was founded in 1906, Trojan in 1925, the brands merged in 2018, Trojan production runs in Shanghai since 2022. Eight-plus plants, three R&D centres, 120+ countries. Confirm duty, voltage and autonomy time.
What to confirm in the request: duty, voltage, autonomy time
Sealed AGM, gel and flooded batteries for racks, cabinets and battery rooms. High-rate series serve UPS and HVDC, long-discharge telecom and utilities, lead-carbon storage, flooded plants. 12 V monoblocs or 2 V cells; data sheets: MRX, MRXF, PLM, PLP, HG Gel, LBTY 2V. State voltage, capacity, autonomy and cabinet size.
What to confirm in the request: voltage, capacity, cabinet size
High-rate sealed AGM. MR is the large-capacity range, MRX has 19 models (UPS 12-28 to 12-830 MRX), MRXF has front terminals (UPS 12-1000 MRXF), DNTY is rated 12 years from 100 W per cell, 8 years below (C&D 12-830 DNT). Needed: UPS model, load power, autonomy, battery count.
What to confirm in the request: UPS model, load power, autonomy
Series for base stations and nodes. msEndur II (AT07P to AT39P) is modular and stackable; NEBS Level 3, UBC Zone 4 and IBC, case rated UL94V-0. TEL-HT (TEL12-105FHTG to TEL12-200FHT) gives 15 years at 25 °C with Pure Lead Plus, front terminals, SR-4228. Provide system voltage (typically 48 V), load, temperature.
What to confirm in the request: system voltage, load current, temperature
Lead-carbon range (SHC12-40 to SHC 12-250FT) for storage. Carbon in the negative electrode slows sulphation, the positive one handles deep discharge. 0.6C charge is allowed, 300 % of a conventional VRLA; 0.2C charges fully in under seven hours. Stated: BS 6290-4, IEC 60896-21/22, SR-4228, Bellcore GR-63 and GR-1089.
What to confirm in the request: capacity, load profile, discharge depth
PLP and PLM use pure lead. Low float current combines with high-rate discharge: they serve high-end UPS and DC cabinets. PLP has 15 models (UPS 12-1100 to 12-9200F PLP), 15 years, PLM has 19 models (UPS 12-1100 to 12-9200F PLM), 16 years, warranty 7.5 years at 25 °C, 5 years at 30 °C.
What to confirm in the request: discharge power and time, string voltage
Vented batteries with liquid electrolyte: power plants, substations, railways, oil and gas, nuclear sites. Stated: 20-year environmental and seismic qualification, 25 to 4000 Ah per unit, Class 1E. Service: plate inspection through a transparent container, cell voltage measurement, flame-arresting vents.
What to confirm in the request: service access, ventilation, temperature
Sealed ranges without high-rate discharge. MPS (12-7 to 12-240): base AGM for telecom and UPS. CPS (12-40 to 12-240) and CPHS (12-100 to 12-700H) cover chemicals and oil and gas. LBTY 12/12(S)/2 V (DCS-18UNC to 45UNC RIT), 15 years, 3 % self-discharge. Gel (12-55HG to 2-2000HG): 18 years at 2 V, 15 at 12 V.
What to confirm in the request: voltage, capacity, temperature, location
The C&D BMS (CDM-C to CDM-2V) monitors a battery: string voltage and current, cell voltage, resistance, temperature. Charge and discharge are recorded, alarms trigger out of range, health uses the MI-ART model. MODBUS is supported; ANSI/TIA-942 and GB50174-2008 are stated.
What to confirm in the request: number of cells, system voltage, protocol
Flooded deep-cycle batteries for cyclic equipment. Capacities come from the document on EU Regulation 2023/1542: T105 225 Ah, T125 240, T145 260, T605 210, T875 170, TE35 245 Ah at 20-hour rate, life 300 cycles. Signature: Alpha Plus, Maxguard T2; Plus: SureVent caps; AC: floor machines and AWPs, 6 and 12 V.
What to confirm in the request: machine model, voltage, compartment
Flooded series for off-grid and hybrid solar. Solar Industrial handles large daily loads: 2 V cells are removable, in a polypropylene housing, assembled into 4 V and 6 V, tested to IEC and BCI. Solar Premium: 10 years, Polyon case. Solar Signature: unstable grids. Shared: Alpha Plus paste with T2, DuraGrid.
What to confirm in the request: voltage and capacity, array power
Sealed versions where watering is impossible. Motive AGM uses C-Max on aerial platforms, floor machines, golf cars, inverters, handling, oil and gas; sites needing non-spillable types: airports, healthcare, shopping centres, schools. Deep-Cycle Gel: heavy-duty sites, Solar AGM: backup.
What to confirm in the request: charger model and battery type
GC2 lithium battery for golf cars and light equipment. A full charge takes under four hours, batteries can be stacked, a BMS protects against short circuits and overheating. No watering is required, terminals do not corrode, durability and vibration testing follows SAE. A lead-acid replacement needs a new charger.
What to confirm in the request: machine model, voltage, range
Single-point watering for flooded batteries: a set is filled through one connection. A non-mechanical indicator shows the level by colour: white — water needed, black — sufficient. The system has internal and external flame arrestors. The manufacturer states a set is filled in under 30 seconds, warranty four years.
What to confirm in the request: battery model, quantity, compartment
C&D designation: series, voltage, index. UPS 12-220 MRX is a 12 V MRX battery, C&D 2-2000HG a 2 V gel cell. MRX, MRXF, PLP and PLM tables give watts per cell at a set discharge time (15 minutes to 1.67 V for MRX, 5 for PLP and PLM), with dimensions, weight and terminals: Faston 250, M5-M8, #10-32 UNF, 1/4-20 UNC.
What to confirm in the request: full nameplate designation and terminals
The duty comes first: backup power for a site, telecom DC, energy storage or traction equipment. Electrical parameters follow, including voltage, discharge power, autonomy time and number of cycles, and then the series and version are chosen. Dimensions, terminal type, room ventilation, temperature and service access are confirmed separately. For traction batteries the battery compartment size and the parameters of the existing charger are added to the list.
Batteries and accessories are consumable items in service: flooded ranges take the HydroLink single-point watering system, battery racks take links, cables and terminals, and backup power systems take C&D BMS monitoring modules. We handle both single-battery replacement and complete sets for a site.
You can send a request from this page: state the duty, electrical parameters and installation conditions, and attach a nameplate photo or site data. Confirmed specifications, scope, price and lead time follow the calculation against the manufacturer's documentation.
English-speaking contact